飛行機

ダーラフリー・ナイト・タンドラーは、人気があり確固たる地位を確立していタンドラーシリーズの足跡をたどっています。太陽が沈むときに飛行を終了する必要はもうありません。ナイトタンドラの信じられないほど明るいライトシステムを使用すると、夕暮れ以降も飛行を続けることができます。ナイトタンドラは、オリジナルのタンドラの無制限の飛行特性を保持しています。荒れた茂みのフィールド、水、雪、砂からの飛行、FPV飛行、曲技飛行、グライダー曳航、キャンディードロップ（オプションパーツ付き）、または古き良きスーパーSTOLスローフライングなど、ナイトタンドラはすべてを引き受けます簡単に。軽量でありながら頑丈で美しく仕上げられたEPOフォーム構造、強力なブラシレスセットアップ、完全に調和したデザインにより、スティックに自信を持ってすぐに笑顔になります。

A replacement fuselage with vertical stabilizer and rudder for the Durafly Night Tundra STOL/Sports model.

A replacement wing set with hinges and control horns for the Durafly Night Tundra STOL/Sports model.

A replacement nose cowl for the Durafly Night Tundra STOL/Sports model.

A complete replacement decal set for the Durafly Night Tundra STOL/Sports model.

A replacement canopy/battery hatch with factory-installed magnetic catch for the Durafly Night Tundra STOL/Sports model.

A complete replacement set of LED lights with wiring and connectors for the Durafly Night Tundra STOL/Sports model. Also could be used on your existing Tundra or other models of a similar size.

信じられないほどのフレンジーは完璧なオールラウンダーです。コントロール スローを減らしたこの飛行機は、初心者や初心者に最適な、滑らかで安定した、非常に簡単に飛ばせる飛行機です。これらのスローを増やし、3S セットアップでの高いパワー対重量比により、フレンジーはその名に恥じません。幅広い驚くべき曲技飛行が可能で、最も野心的な曲技飛行パイロットの要求にも応えます。

This beautiful model of a Grumman F8F Rare Bear Reno Racer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

The 550mm XK A300 Beechcraft D17S is manufactured to very high standards in tough EPP foam. It is supplied ready to fly (RTF) complete with a Mode 1-2 switchable 2.4GHz 4 channel RC system, a switchable 6-axis gyro, a powerful, efficient brushless motor with ESC, 2 servos, on-board LED lights, 7.4V 600mAh battery, and a USB charging cable. Assembly is very easy and straightforward, all the necessary parts and tools are supplied to get your Staggerwing ready to fly in less than an hour, you just need to supply 6 x "AA" batteries for the transmitter.

The 550mm XK A300 Beechcraft D17S is manufactured to very high standards in tough EPP foam. It is supplied ready to fly (RTF) complete with a Mode 1-2 switchable 2.4GHz 4 channel RC system, a switchable 6-axis gyro, a powerful, efficient brushless motor with ESC, 2 servos, on-board LED lights, 7.4V 600mAh battery, and a USB charging cable. Assembly is very easy and straightforward, all the necessary parts and tools are supplied to get your Staggerwing ready to fly in less than an hour, you just need to supply 6 x "AA" batteries for the transmitter.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

We have all had to start learning to fly an RC model at some point, and a stable, high-wing trainer that is very forgiving is what is required. The Dancing Wings Hobby Vogee-16 Trainer is the perfect choice for the rookie pilot. It has a large, flat-bottomed wing with dihedral which enables it to fly very slowly, and it has the stability to sort itself out if you get in a muddle. The Vogee's flying characteristics are very benign, beginners tend to over-control, and the Vogee is very gentle in its handling, especially if you install one of the readily available 3-axis gyros that are available on the market these days. It also has a tricycle landing gear with a steerable nosewheel which really helps with the take-offs and landings. This version of the Vogee is supplied with a powerful 2817-900KV brushless motor, a 60A brushless ESC, an 11" prop, 2 x 37g servos, and 2 x 17g 

The Dancing Wings Hobby Cute Girl laser cut balsa kit captures the type of vintage model airplane that was used in the early days of RC with radio assist. It has that classic retro look, lots of wing dihedral, band on wings, a large cabin, classic shapes to the wings and empennage, and tail dragger landing gear, all the features required for a retro classic look.

The controls are just basic 3 channels, rudder, elevator, and motor control, this keeps things nice and simple. We recommend that you power the Cute Girl with a brushless motor set-up. However, a nitro or a diesel engine can be used for that even more authentic vintage look and classic soundtrack.

The Dancing Wings Hobby Savage Bobber is a small, lightweight foam model that is quick and simple to build. The full-size Savage Bobber was devised by the Zlin Aviation Company. The Bobber as in the motorcycle world means that it is a stripped-down, customized version of an original. The Savage Bobber is a stripped-down, customized version of its older brother the Savage Classic. It is lighter, more maneuverable, and has a slightly narrower fuselage, and the absence of covering to the rear of the fuselage greatly improves the crosswind handling.

The model is reasonably straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction, tough plastic for the open framework rear fuselage, and lightweight balsa for the internal structure. Carbon strips are also included to reinforce and improve the stiffness of the structure. It builds up quickly into a good-looking, fun-to-fly lightweight (only 98g) sports plane that is perfect for indoor or park flying. This ARF kit is supplied with a powerful 1108-4000KV brushless motor, 5A brushless ESC, 5" propeller, and 4 x 2g servos.

A replacement ORX 3-Axis gyro for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

Features:
• Gyro stability for roll, pitch, and yaw
• Small and lightweight
• Easy set-up
• 3 modes: Gyro off/Gyro on/Trainer mode

Gyro off means no stabilization from the gyro at all. Gyro on gives some gyro stability and full control surface deflection. Trainer mode gives a lot more gyro stability, and also limits the amount of control deflection, will also self-right the model to a normal flying attitude.

実物大のASW28は、最新の繊維強化複合材で作られた15メートルのスパンを備えたスタンダードクラスのグライダーです。 ASW28のメーカーはアレグザーンダー・シュライカー・GmbH＆Coです。「W」は、これが影響力のある多作のドイツ人デザイナー、ガーハード・ウェーベルによって設計されたことを示しています。 2000年に連続生産を開始。

A replacement pair of wings with factory-applied decals for the AXN Floater-Jet. Please note that this spare part may have a different color scheme to your AXN Floater-Jet but that is the only difference.

A replacement horizontal stabilizer with elevator and factory-applied decals for the AXN Floater-Jet. Please note that this spare part may have a different color scheme to your AXN Floater-Jet but that is the only difference.

A replacement vertical stabilizer with rudder and factory-applied decals for the AXN Floater-Jet. Please note that this spare part may have a different color scheme to your AXN Floater-Jet but that is the only difference.

A replacement set of decals for the AXN Floater-Jet.

The Ranger 2400 is a large electric powered pusher glider that has been specifically designed for FPV flying.  The enormous fuselage has plenty of room for large capacity or twin battery packs, radio and stabilizer components, FPV equipment, and molded into the front just below the nose is a purpose-made provision for an FPV camera. Also included is the usual Volantex camera mount that can take the place of the black canopy if you wish. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 robust metal spars join the wings to the fuselage. Also, each of the large ailerons is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using the popular Volantex fast connect clips, after flying, simply squeeze the clips to release the wings.

A replacement wing set for the Volantex Ranger 2000, and Phoenix V2 electric aircraft.

A replacement fin, rudder, and horizontal stabilizer for the Volantex Ranger 2000, and Phoenix V2 electric aircraft.

A replacement wing set for the Volantex Ranger 2400, and Phoenix 2400 electric aircraft.

A replacement horizontal stabilizer with elevator, and vertical stabilizer with rudder for the Volantex Ranger 2400 and Phoenix 2400.

H-キングクルセイダー30Eは、クラシックなスティックデザインに基づいています。この電気ラジコン飛行機は、初心者と専門家の両方が飛ぶことができます。軽量のプライとバルサで構成され、ハイコントラストの配色で塗装されています。十字軍はあなたの地元のホビークラブで地上と空中で際立っています。