飛行機

The Volantex RC 4-channel Mitsubishi A6M Zero is the perfect ready-to-fly small warbird that comes complete with a transmitter, receiver, integrated ESC, and built-in Xpilot stabilization system. This gyro system offers super stable flying and self-leveling which makes it perfect for early, and relatively inexperienced pilots. The gyro is switchable from the transmitter, 3 modes can be selected. The first is beginners mode which gives maximum stabilization and reduces the amount of control the pilot has, the second is intermediate, which reduces the stabilization and gives the pilot slightly more control. The final mode is no gyro stabilization and the pilot has full control authority. It also features a "One-Key" aerobatic system which makes performing aerobatics like loops and rolls a breeze, and a "One-Key" return system.

This beautiful model of a North American T-28 Trojan USAF Military Trainer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

This beautiful model of a Grumman F8F Rare Bear Reno Racer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

The Durafly Carbon Arcus is a sleek and beautiful F3A biplane designed to perform smooth, F3A-style pattern aerobatics and is the perfect choice for honing your aerobatic skills. It features a durable, lightweight EPO airframe with carbon reinforcement, aluminum landing gear, carbon interplane struts, and an advanced 4S motor and prop combination that offers a high power-to-weight ratio for unending verticals and incredible performance.

Flying the Arcus F3A is a dream, the long tail moment, the low wing loading, and the abundance of power give you a stable and predictable airplane. Take-offs require very little rudder input, rolls are crisp and axial, and loops can be as large as you wish. The large propeller provides ample braking action in the downlines to avoid overspeeding, and if you enjoy flying knife-edge, then the Arcus II performs this with ease. No roll or pitch coupling here, just apply a touch of rudder, control the throttle to hold your line, and the Arcus will knife edge until the cows come home. Finally, when the time comes, throttle back, and the Carbon Arcus settles into a nice sink rate for a perfect 3-point landing every time.

The 550mm XK A300 Beechcraft D17S is manufactured to very high standards in tough EPP foam. It is supplied ready to fly (RTF) complete with a Mode 1-2 switchable 2.4GHz 4 channel RC system, a switchable 6-axis gyro, a powerful, efficient brushless motor with ESC, 2 servos, on-board LED lights, 7.4V 600mAh battery, and a USB charging cable. Assembly is very easy and straightforward, all the necessary parts and tools are supplied to get your Staggerwing ready to fly in less than an hour, you just need to supply 6 x "AA" batteries for the transmitter.

The 550mm XK A300 Beechcraft D17S is manufactured to very high standards in tough EPP foam. It is supplied ready to fly (RTF) complete with a Mode 1-2 switchable 2.4GHz 4 channel RC system, a switchable 6-axis gyro, a powerful, efficient brushless motor with ESC, 2 servos, on-board LED lights, 7.4V 600mAh battery, and a USB charging cable. Assembly is very easy and straightforward, all the necessary parts and tools are supplied to get your Staggerwing ready to fly in less than an hour, you just need to supply 6 x "AA" batteries for the transmitter.

This fantastic looking XFly 80mm EDF jet is a detailed scale model of the French Air Force Alpha Jet, it is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, removable gun pod, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in a French Air Force color scheme.

This fantastic-looking XFly 80mm EDF jet is a detailed scale model of the Dassault/Dornier Alpha Jet, this version is in the color scheme of the famous Patrouille de France aerobatic team. It is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in the classic Patrouille de France color scheme.

The XFLY T-7A Red Hawk 750mm EDF jet is an easy-to-fly, versatile EDF trainer that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S compatible power system includes a 12-bladed 64mm fan unit that delivers ample power for an abundance of thrust, speed, and an incredible turbine-like sound. The full-size Boeing-Saab T-7 Red Hawk (originally known as the Boeing T-X) is an American/Swedish advanced jet trainer that was designed to replace the popular Northrop T-38 Talon. The design is smaller, but very similar to the McDonnell Douglas F/A-18 with its large leading edge root extensions, and V-shaped twin vertical tail design. These design features give the full-size incredible maneuverability and excellent low-speed handling, these attributes carry over extremely well to the XFLY model of the T-7A Red Hawk.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.

This fantastic-looking XFly 80mm EDF jet is a detailed scale model of a US Airforce T-7A Red Hawk advanced trainer. It is packed full of scale details including molded-in panel lines, simulated antenna, pitot tube, a crystal clear canopy with cockpit detail, missiles, drop tanks, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, full-flying horizontal stabs, and operational flaps.

The XFLY Swift 2100 is a versatile electric-powered glider that is quite happy flying fast and doing aerobatics or is equally at home flying slowly and just floating around. To achieve this versatility the XFLY engineers have used CFD (Computer Fluid Dynamics), which has enabled the Swift 2100 to achieve a high lift-to-drag ratio and excellent aerodynamic characteristics. The factory-installed power system includes an efficient 3136-1000KV brushless motor with 40A brushless ESC and drives a 10x6 2-blade folding propeller with metal spinner. This system can be powered by either a 3S, or a 4S LiPo battery to deliver plenty of thrust for fast climbs to soaring altitudes, aerobatics, and general sport flying.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.

The XFLY A-10 Thunderbolt II is a small, scale twin-EDF model of the iconic US Air Force close attack fighter that is perfect for flying in smaller areas such as local parks, sports fields, etc. The full-size A-10 Thunderbolt affectionately known as the "Warthog", was mainly used for close air support for ground troops and armored vehicles. It was highly maneuverable due to its large ailerons, was very tough and durable, could take a lot of punishment, and it "pièces de résistance" was the Gatling gun mounted in the nose. The actual airframe was designed around this high-powered 30mm gun, it was one of the most powerful guns ever fitted to a plane and could fire up to an amazing 4,200 rounds per minute.

The Dancing Wings Hobby Fokker Eindecker III is a scale model of the famous World War 1 monoplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, a dummy engine, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

The Dancing Wings Hobby S.E.5A is a detailed scale model of the famous World War 1 biplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, scale exhausts, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

We have all had to start learning to fly an RC model at some point, and a stable, high-wing trainer that is very forgiving is what is required. The Dancing Wings Hobby Vogee-16 Trainer is the perfect choice for the rookie pilot. It has a large, flat-bottomed wing with dihedral which enables it to fly very slowly, and it has the stability to sort itself out if you get in a muddle. The Vogee's flying characteristics are very benign, beginners tend to over-control, and the Vogee is very gentle in its handling, especially if you install one of the readily available 3-axis gyros that are available on the market these days. It also has a tricycle landing gear with a steerable nosewheel which really helps with the take-offs and landings. This version of the Vogee is supplied with a powerful 2817-900KV brushless motor, a 60A brushless ESC, an 11" prop, 2 x 37g servos, and 2 x 17g 

The Dancing Wings Hobby Stick-14T 3D aerobatic trainer is the perfect choice for intermediate and experienced RC pilots alike. It is based on the classic stick design and is quite capable of all the usual aerobatic maneuvers, plus with the right power train, it doubles up as the perfect 3D trainer. It has a very wide speed range, it is just as happy flying slowly as it is screaming about the sky. For added fun and enjoyment, the strip ailerons are split halfway making for outboard ailerons and inboard flaps. This allows for really slow or steep approach landings, and if the flaps are mixed in with your other controls it allows you to customize the handling to suit your own flying style. 

The Dancing Wings Hobby Cute Girl laser cut balsa kit captures the type of vintage model airplane that was used in the early days of RC with radio assist. It has that classic retro look, lots of wing dihedral, band on wings, a large cabin, classic shapes to the wings and empennage, and tail dragger landing gear, all the features required for a retro classic look.

The controls are just basic 3 channels, rudder, elevator, and motor control, this keeps things nice and simple. We recommend that you power the Cute Girl with a brushless motor set-up. However, a nitro or a diesel engine can be used for that even more authentic vintage look and classic soundtrack.

The Dancing Wings Hobby Aion laser cut balsa kit is an easy-build electric sports glider that includes ailerons and flaps. The Aion is aimed at the modeler who wants to experience real model-making but wants something that is reasonably straightforward to build. This is achieved with the use of accurate laser-cut parts and the simple box-type fuselage which produce a strong, accurate, lightweight structure. The Aion is relatively easy to build, however, we do recommend that some experience in building a wood model airplane has been gained previously. Most of the components are constructed over the detailed, high-quality printed 1:1 building plan. This outstanding kit is supplied with a powerful 2216-920KV brushless motor, a 30A brushless ESC, an 11" folding prop with metal spinner, 6 x 9g servos, and an iron-on covering film pack

The Dancing Wings Hobby Savage Bobber is a small, lightweight foam model that is quick and simple to build. The full-size Savage Bobber was devised by the Zlin Aviation Company. The Bobber as in the motorcycle world means that it is a stripped-down, customized version of an original. The Savage Bobber is a stripped-down, customized version of its older brother the Savage Classic. It is lighter, more maneuverable, and has a slightly narrower fuselage, and the absence of covering to the rear of the fuselage greatly improves the crosswind handling.

The model is reasonably straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction, tough plastic for the open framework rear fuselage, and lightweight balsa for the internal structure. Carbon strips are also included to reinforce and improve the stiffness of the structure. It builds up quickly into a good-looking, fun-to-fly lightweight (only 98g) sports plane that is perfect for indoor or park flying. This ARF kit is supplied with a powerful 1108-4000KV brushless motor, 5A brushless ESC, 5" propeller, and 4 x 2g servos.

The Dancing Wings Hobby Shining is a large lightweight profile-style foam kit that is quick and simple to build. It has been designed to be the perfect introduction to 3D flying and will perform extreme 3D maneuvers such as waterfalls, harriers, knife-edge loops, rolling circles, and much more.

The model is very straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction so the parts count is quite low, and carbon strips are supplied for strengthening. It builds up quickly into a good-looking, fun-to-fly lightweight extreme sport 3D plane that is perfect for park flying and on playing fields. This ARF model is supplied with a powerful 2216-950KV brushless motor, 30A brushless ESC, 10" propeller, and 4 x 9g servos.

B-17フライングフォートレスは、第二次世界大戦の最も有名な同盟爆撃機の一つです。それは戦争のすべての劇場で提供していますが、それはこの頑丈な、よく武装重爆撃機は、歴史の本にその方法を飛んだことが、特に有名な第8空軍で運用のヨーロッパの劇場（ETO）でした。

当社独自のHobbyking「メンフィス・ベル」モデルの成功を基に、私たちは、この巨大な1875ミリメートル翼幅ウォーバードを再設計している今、あなたにどこでもこのサイズで利用可能なこの象徴的な重爆撃機の最高の飛行と最高の探して演出をもたらします。

私たちの幻想的なモデルは、サーボのすべてとESCのプリインストールをして箱から出して権利を組み立てるために、シンプルで早いのが特長です。これは、EPOのフォームから作られたので、それはあなたが期待するほどタフだし、1枚の翼が着脱可能であるとして、それはまた、輸送に非常に実用的です。

プレフィット電動スケールホイールは、実際の航空機のように前進​​後退し、ほぼあらゆる表面に取り組むのに十分な大きさです。 4アップグレード900kvブラシレスモータからのタップの電源もたくさんあり​​ます。逆回転する小道具がゼロトルク、スムーズな離陸の、一日のプリフィットスプリットフラップ付き順序を作る、水揚げもストレスフリーです。

しかし、それが印象的です。このバージョンでは細部へのこだわりです。パネルラインが低減されており、二つの新しい正確なスケールのカラースキームが利用可能になりました。オリーブドラブ/グレーと全体の銀。これら二つの方式は、アクションに入り、追加機能として、我々はまた、それぞれのカラースキームのための2つの第八空軍デカールセットの選択だけでなく、あなたはどちらか作成できるように、オプションのあごのタレットを含めましたB17年代の大部分を表します初期の「F」以降の "G"バリアント。

フライング・フォートレスのように我々のモデルは、トップとボールタレットだけでなく、尾、鼻と腰の銃の位置と、銃で剛毛。ダミープラット・アンド・ホイットニーのエンジンは3刃逆回転スケールの小道具やハブ、最終的には、ナビゲーション＆着陸灯は、この印象的なモデルの全体的なリアリズムのレベルに追加する作業は終了です。

表面の下に私たちのB17は、追加の翼ブレースで強化してきたし、もちろん彼女はテストでは、広範囲に飛行されていて、それがこのモデルが本当に真価を発揮空気中です。

あなたは時間にほぼパワードグライダーのように、それは飛ぶことがいかに簡単であるかに打たされ、それがループやロールなどのノンスケールの曲芸飛行を行うことができるよりも多くのだとしても、それはすべてのビットに重爆撃機に見えることが低速であります。

その印象的な翼幅で、低パスは、空気中の実際の存在に翻訳し、ちょうどそれを前方に駆動するこれら4つの小道具の音は、経験に追加されます。

私たちのB17は、スケールのパイロットの夢モデルです。それは、素晴らしいですね美しく飛ぶと、間違いなくどこでも、あなたはそれを飛ぶたびに回し頭を持っています "すごい"の要因を持っている大きな飛行機です。

特徴：
•スケールの概要
•本物のカラースキーム
•デカールの選択
• "G"バリアントのためのオプションのあごのタレット
•Servolessの後退
•フラップ
•オペレーティングナビゲーションと着陸灯
•強力な900Kvモーター
•カウンタ回転小道具

仕様：
翼幅：1875ミリメートル
長さ：1350ミリメートル
フライング重量：2750グラム
モーター：4×900kvブラシレスアウトランナーモーター
ESC：4×20A ESC
サーボ：6×9グラムサーボ
後退： 電気Servoless引っ込みます

必須：（含まれていません）
6チャンネルのTxとRx
2×3S 11.1V 2200mAhの〜3000mAhのLipolyバッテリー

あなたの地元の公園のレッドバロンなる準備ができていますか？まあ素晴らしいフォンSTIKであなたは数分でエース・パイロットであることができます。

偉大遅いスティックデザイン、フォンSTIKは、強力なギヤードモータは、1S 3.7V 400 mAhのlipolyバッテリーをオフに実行していると、どこからでもモデルを飛ぶ、超軽量に作られています。

、干渉のない飛行のために、独自の2.4GHzの無線機に付属の組み立てが容易とフォンSTIKであなたがダイビング攻撃を作ることになりますと、全く時間がないの実行を機銃掃射、印象的なレッドバロン仕上げに仕上がっています。

それは、その基本的なラダー、エレベーターの制御システムを飛ぶのは簡単だし、初心者のパイロットのために非常に寛容です。実際には、フォン・STIKは、任意の若い人のために、あるいは任意の大騒ぎせずに地元の公園でアップスローされる可能性が完全に楽しいフライ航空機を探している経験豊富なパイロットのための完璧な最初のモデルになります。

特徴：
•2.4Gh無線システム
•軽量
•簡単に組み立てます
•ラダー/エレベーターモデル
•初心者のためのパーフェクト
•美しい太字の「レッドバロン」仕上げ

仕様：
翼幅：52センチメートル
長さ：38センチメートル
RCシステム：2.4GHzの
プロペラ：6050（slowfly）
重量：75グラム
バッテリー必須：1S 3.7V 350-400mAh Lipoly
コントロール距離：150メートル
モード：2

セイウチは非常に安定したチラシであり、飛ぶのはとても楽しいですが、セイウチと同じように素晴らしく、その日の日没時に楽しみは終わりました。さて、あなたはナイトセイウチで空を照らしているので、もうありません。

スピードを求めているなら、EFXtraが最高の状態であり、時速100マイルを超えるすぐに使えるパフォーマンスを備えています。 ダーラフリーはEFXレーサーの精神を維持し、驚異的なロールレートや上昇率などのパフォーマンスを追加することに重点を置いていました。

EFXレーサーには多くの高性能機能と新しい追加機能があります。 ダーラフリーEFXtraは、極端なロールレートを実現する新しいクリップウィング（975ミリメートル）を誇っています。 60A Aerostar ESCを備えたアップグレードされた3536-1780kvブラシレスモーター（超高速日本のベアリングを使用）が追加され、最大4Sのパフォーマンスを実現するように最適化されています。より高速、高トルクのデジタル9gサーボ（エルロンに連動する金属）とボールリンクコネクタにより、走行速度に関係なく、すべての表面を真に正確に制御できます。エッジでの生活を愛するアドレナリン中毒者のために、ボックスにFPVマウントも含まれています。

スピードを求めているなら、EFXtraが最高の状態であり、時速100マイルを超えるすぐに使えるパフォーマンスを備えています。 ダーラフリーはEFXレーサーの精神を維持し、驚異的なロールレートや上昇率などのパフォーマンスを追加することに重点を置いていました。

実物大のASW28は、最新の繊維強化複合材で作られた15メートルのスパンを備えたスタンダードクラスのグライダーです。 ASW28のメーカーはアレグザーンダー・シュライカー・GmbH＆Coです。「W」は、これが影響力のある多作のドイツ人デザイナー、ガーハード・ウェーベルによって設計されたことを示しています。 2000年に連続生産を開始。

Our model captures the true spirit of the early WW1 Fokker Eindekker, It has an open framework structure built from quality balsa and hardwoods, a fiberglass cowl and plastic engine covers, a dummy rotary engine, and of course the machine gun. For ease of construction, all the parts are beautifully laser cut and are extremely accurate which will allow you to build the perfect model. To complete the contents of this superb kit are a pair of vintage aircraft wheels, pre-bent and drilled aluminum wing struts and U/C legs, carbon tube wing spars, and joiners plus a comprehensive hardware pack that includes rigging wire, nuts, and bolts, servo horns, rods, and connectors, etc.