航空機

ウォーゴー・シグナチャー・エッジ540T 3Dは、有名な3Dパイロットであるマイケル・ウォーゴーに触発されたシリーズのもう1つの素晴らしい飛行機です。 エッジ540Tは、非常に正確な3D飛行および曲技飛行トレーニング用に特別に設計されました。私たちのチームパイロットであり、3Dの専門家であるマイケル・ウォーゴーは、他の発泡体よりも剛性が高く、軽量な発泡機を望んでいました。これは、軽量で耐衝撃性のあるEPPフォームで覆われた剛性のある軽量のバルサフレームの組み合わせによって実現されました。

H-キングFG-1コーセア「ラッキーガロン」は、エアレースで印象的な服を着たWW2戦闘機「リーノー・エーシズ」であるH-キングのミニシリーズの3番目です。付属のストック3108-1070KVブラシレスモーターを備えたFG-1コーセア「ラッキーガロン」は、推奨される2200mAh 4S LiPoを使用すると、100mphに近い速度で箱から出してすぐに非常に高速なモデルを提供します。ただし、経験豊富な手で時速100マイル以上の速度をお探しの場合は、オプションのドロップインフィット3108-1170KV「プロー」ブラシレスモーターがあります。これにより、起動時に余分な回転トルクを処理できるものに対して、同じプロペラ、ESC、および4Sバッテリーで見栄えの良いリーノー・エースに本当に弾道的なパフォーマンスを与えることができます。

このバージョンのYak-11はレッドリノレーサーです。これはトータルスケールの配色ではありませんが、大まかにストレガP-51リノマスタングに基づいています。前述のように、レーサーバージョンであるため、純粋な速度のために開発されたパワートレインが付属しています。 6S LiPoパックを使用すると、付属の95A ESCと16x6プロップを備えた5052-550KVブラシレスモーターにより、Yak-11は最大125mphの驚異的な速度で回転します。これは迅速であり、この印象的なサイズのモデルが地面の近くで高速パイロンターンをしているのを見るのは見るべき光景です。曲技飛行もヤクと一緒に演奏するのが夢です。ロールは非常に軸方向であり、パワーが豊富なためループ操作は大きくなります。それが実行する曲技飛行への唯一の制限はあなたの飛行スキルです。

信じられないほどのフレンジーは完璧なオールラウンダーです。コントロール スローを減らしたこの飛行機は、初心者や初心者に最適な、滑らかで安定した、非常に簡単に飛ばせる飛行機です。これらのスローを増やし、3S セットアップでの高いパワー対重量比により、フレンジーはその名に恥じません。幅広い驚くべき曲技飛行が可能で、最も野心的な曲技飛行パイロットの要求にも応えます。

在 EFX Racer 取得成功后，Durafly 决定生产迷你版，俗话说，好东西都是小包装的，于是 MFX Racer 诞生了。MFX 在设计上采用了与大型飞机相同的严格标准，并且仍然具有速度、强度、灵活性以及您对 Durafly 型号所期望的稳定性。此外，您还能享受到只有 Durafly EPO 型号才能提供的简单组装和高质量。

We have all had to start learning to fly an RC model at some point, and a stable, high-wing trainer that is very forgiving is what is required. The Dancing Wings Hobby Vogee-16 Trainer is the perfect choice for the rookie pilot. It has a large, flat-bottomed wing with dihedral which enables it to fly very slowly, and it has the stability to sort itself out if you get in a muddle. The Vogee's flying characteristics are very benign, beginners tend to over-control, and the Vogee is very gentle in its handling, especially if you install one of the readily available 3-axis gyros that are available on the market these days. It also has a tricycle landing gear with a steerable nosewheel which really helps with the take-offs and landings. This version of the Vogee is supplied with a powerful 2817-900KV brushless motor, a 60A brushless ESC, an 11" prop, 2 x 37g servos, and 2 x 17g 

The Dancing Wings Hobby Stick-14T 3D aerobatic trainer is the perfect choice for intermediate and experienced RC pilots alike. It is based on the classic stick design and is quite capable of all the usual aerobatic maneuvers, plus with the right power train, it doubles up as the perfect 3D trainer. It has a very wide speed range, it is just as happy flying slowly as it is screaming about the sky. For added fun and enjoyment, the strip ailerons are split halfway making for outboard ailerons and inboard flaps. This allows for really slow or steep approach landings, and if the flaps are mixed in with your other controls it allows you to customize the handling to suit your own flying style. 

The Dancing Wings Hobby Cute Girl laser cut balsa kit captures the type of vintage model airplane that was used in the early days of RC with radio assist. It has that classic retro look, lots of wing dihedral, band on wings, a large cabin, classic shapes to the wings and empennage, and tail dragger landing gear, all the features required for a retro classic look.

The controls are just basic 3 channels, rudder, elevator, and motor control, this keeps things nice and simple. We recommend that you power the Cute Girl with a brushless motor set-up. However, a nitro or a diesel engine can be used for that even more authentic vintage look and classic soundtrack.

After the incredible success of the Tundra V1 and V2, Durafly has decided to produce yet another version with even more improvements to bring the Tundra series bang up to date. The V3 is now a pure 4S set-up so it has power in abundance to make your flying even more fun than it was before (if that is at all possible!). Other changes and improvements include daylight bright LEDs (so bright they are suitable for true dawn-to-dusk flying), a reinforced nylon prop that is more efficient, and better balanced, a return to the classic EPO foam wheels which are lighter, and stronger, pre-installed pushrods, and hex-head bolts and screws throughout. The V3 is available in the classic Tundra green and white scheme, or a red and silver color scheme Durafly has called the "Inspire". The reason is that the original Tundra was "Inspired" by the "Highlander" full-size SuperStol experimental airplane.

The ZOHD Altus FPV airplane offers cutting-edge technology for those enthusiasts seeking unmatched performance and versatility. The Altus combines state-of-the-art technology with a practical design and offers an unparalleled flying experience. This portable design is very easy to assemble, no glue is required, and the wings and tail are detachable making it very easy to transport, even in a backpack for when trekking to those out-of-the-way places.

在EFX Racer取得成功后,公司决定生产一款迷你版,正如人们所说,好东西总是小包装,于是MFX Racer诞生了。MFX的设计标准与它的“大哥”们完全相同,依然具有速度、力量、灵活性和稳定性,完全符合您对Durafly模型的期待。此外,您还可以享受Durafly EPO模型独有的组装简易性和质量。

MFX Racer的零件数量和组装时间都极少,只需不到充电时间就能完成组装。MFX Racer在4S设置下速度很快,但仍然感觉异常稳定,给飞行员一种锁定感。然而与大多数高速飞行器不同,它还具有出色的低速操控性。凭借其4通道控制,MFX Racer也非常适合特技飞行,大回环、快速翻滚、刀锋、急停和旋转,MFX Racer都能做到,唯一的限制就是您这个飞行员! MFX有2种翼尖选项(两种都随附在包装盒中),一种是标准的815mm选项,另一种是715mm的剪翼选项。标准的机翼设置可提供更好的爬升率,而剪翼设置则可显著提高翻滚率。

ホビーキングパラモーターは、非常に穏やかで安定した飛行特性を備えているため、飛行が非常に簡単ですが、慣れれば、ループやロールを簡単に実行できます。設計上、2400mmの巨大な高性能セイルは素早く開き、打ち上げが容易で、乱気流中でも形状を維持します。シングルスキンの耐久性のあるセイルは100％リップストップ生地でできており、耐久性のあるアルミニウムゴンドラに取り付ける準備ができている丈夫なポリエチレンラインが事前に装備されています。ミキシングとサーボ制御曲線を備えたコンピューターラジオが必要です。ラジオのセットアップに関係するものを確認するには、添付のビデオとパラフォイル自体のセットアップ用のビデオをご覧ください。

The XFLY Swift 2100 is a versatile electric-powered glider that is quite happy flying fast and doing aerobatics or is equally at home flying slowly and just floating around. To achieve this versatility the XFLY engineers have used CFD (Computer Fluid Dynamics), which has enabled the Swift 2100 to achieve a high lift-to-drag ratio and excellent aerodynamic characteristics. The factory-installed power system includes an efficient 3136-1000KV brushless motor with 40A brushless ESC and drives a 10x6 2-blade folding propeller with metal spinner. This system can be powered by either a 3S, or a 4S LiPo battery to deliver plenty of thrust for fast climbs to soaring altitudes, aerobatics, and general sport flying.

The ZOHD Drift is a super easy, hand-launch slow-fly pusher glider that has been designed specifically for FPV flying. It is extremely stable in flight, but the controls remain very responsive and accurate. Being a pusher prop design gets the prop well away from the ground, and the hands when launching, it also allows the camera an uncluttered viewing angle.

The Drift is very easy to assemble, no glue is required, and the wing and tail boom remain detachable, making for easy transportation. The Drift has a large battery bay for extended flight times, plus a nose camera bay compatible with most FPV, and AIO cameras available today. It also has a dedicated equipment bay for the flight controller, and  GPS unit, etc. The strong EPP foam airframe also benefits from a tough, specially designed H-girder spar for the wing, built-in CF inside the fuselage for enhanced strength, and CF pushrods throughout for precision control.

この見栄えが良く、見事な飛行のアビアズ・キングトウィン1700スポーツ/スケールモデルは、小さなツインターボプロップに基づいており、世界中の軍用または民間のチャーター航空会社で使用されているタイプを非常に彷彿とさせます。シンプルでありながら印象的な配色は、民間のプロプリナーで一般的に使用されている塗装作業の種類を表しています。

キングトウィン1700には、LEDライト、リトラクト、スプリットフラップなどのクールな機能が満載です。 Aerostar 40A ESCを備えた2x Aerostar 3748-820KVブラシレスアウトランナーのパワートレインは、慎重なテストの結果、アビアズチームによって選択されました。モーター、ESC、二重反転プロペラ、および4S LiPoバッテリーのこの組み合わせは、電力と持続時間の最適なセットアップであることが証明されました。

この見栄えが良く、見事な飛行のアビアズ・キングトウィン1700スポーツ/スケールモデルは、小さなツインターボプロップをベースにしており、世界中の軍または民間のチャーター航空会社で使用されているタイプを非常に彷彿とさせます。このタイプの飛行機で利用できる非常に多くの素晴らしい配色で、Aviosは無地の白いバージョンを作成することにしました。この無地の白い仕上げは、あなたが完全にユニークで、あなた自身の選択のオーダーメイドの配色を作り出すための完璧な空白のキャンバスを提供します。

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

The Dancing Wings Hobby Savage Bobber is a small, lightweight foam model that is quick and simple to build. The full-size Savage Bobber was devised by the Zlin Aviation Company. The Bobber as in the motorcycle world means that it is a stripped-down, customized version of an original. The Savage Bobber is a stripped-down, customized version of its older brother the Savage Classic. It is lighter, more maneuverable, and has a slightly narrower fuselage, and the absence of covering to the rear of the fuselage greatly improves the crosswind handling.

The model is reasonably straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction, tough plastic for the open framework rear fuselage, and lightweight balsa for the internal structure. Carbon strips are also included to reinforce and improve the stiffness of the structure. It builds up quickly into a good-looking, fun-to-fly lightweight (only 98g) sports plane that is perfect for indoor or park flying. This ARF kit is supplied with a powerful 1108-4000KV brushless motor, 5A brushless ESC, 5" propeller, and 4 x 2g servos.

Avios continues to bring you great flying, and high-quality RC models of interesting subjects, this theme continues with the Avios Twin Otter STOL (Short Takeoff and Landing) twin-engine plane. The Avios model captures the looks and great flying characteristics of the full-size inspired Twin Otter. The impressive power-to-weight ratio and light wing loading makes for exceptional low-speed handling and STOL flight characteristics.

The Avios Twin Otter is also crammed full of outstanding features, these include a set of large barn door style flaps, counter-rotating props for improved handling, scale outline with detailed surface finish, and scale plastic parts. Other features include a fully sprung, all metal CNC nose strut with servo saver, low bounce soft foam oversized bush wheels, and day bright LED lights throughout.

The list of outstanding features goes on with a set of floats included, these are easily fitted in place of the tricycle landing gear so that you can have even more fun flying from lakes and rivers. The included Aerostar RVS speed controllers make flying from water on the floats so much easier, they allow you to maneuver and taxi even in the more challenging conditions and situations that can be found on inland waters. To further help when flying with the floats fitted are a pair of optional tail fins, these increase the yaw stability caused by the extra drag of the floats. Avios have also included two magnetically held interchangeable nose sections, one short to emulate the "Series 100" Twin Otter, and one long so that you can quickly change the look of your Twin Otter to a "Series 200".

The Hobbyking H-King Mini L-39 has been developed from an earlier version that had a 50mm fan unit. This latest rendition from RC L39 aircraft sports an uprated 64mm 8-blade EDF fan unit with a 2220-3300KV brushless outrunner motor, a 50A ESC, and uses a 4S LiPo battery instead of the original 3S setup. The full-size L-39 jet was designed in the Czech Republic as a high-performance jet trainer for performing basic to advanced pilot training. It was the first trainer aircraft in the world to be equipped with a turbofan.

The H-King A-1 Skyraider PNF is a realistic flying model of the original plane. It is made of strong EPO foam and is electric-powered which makes it ideal as a park flier. There is a built-in Gyro (or Flight Stabilizer) to make flying this plane even easier.

This H-King version of the classic P-51D warbird is manufactured in a superbly finished EPO foam in an authentic blue and silver color scheme with all the decals pre-applied. This is the updated V2 version of this popular model and it now comes with a built-in 6 axis ORX flight stabilization system to make it even easier to fly. The stabilization system utilizes a 32bit MCU and a 6 axis digital gyro for ultra-fast control response, it can also be switched from beginner mode to expert mode.

This H-King version of the classic F4U Corsair warbird is manufactured in a superbly finished EPO foam in an authentic navy color scheme with the decals pre-applied. The Corsair is a very stable flyer in its own right, for most pilots, the gyro is not necessary. However, for beginners and low hours pilots, a 6 axis ORX flight stabilization system is supplied which makes it even easier to fly. The stabilization system utilizes a 32bit MCU and a 6-axis digital gyro for ultra-fast control response, it can be switched from beginner to expert mode as your experience grows.

ホビーキングP-51「ギャロッピングゴースト」は、ホビーキングの新しいミニシリーズ「リノエーシズ」の最初のもので、エアレースで印象的な服を着た第二次世界大戦の戦闘機です。付属のストック3108-1070KVブラシレスモーターを備えたP-51「ギャロッピングゴースト」は、推奨される2200mah 4S LiPoを使用すると、100mphに近い速度で箱から出してすぐに非常に速いモデルを提供します。ただし、経験豊富な手で時速100マイル以上の速度をお探しの場合は、オプションのドロップインフィット3108-1170KV「Pro」ブラシレスモーターがあります。これにより、見栄えの良いReno Aceは、同じプロペラ、ESC、および4Sバッテリーで、発射時に余分な回転トルクを処理できるものに対して、本当に弾道的なパフォーマンスを発揮します。

This fantastic looking XFly 80mm EDF jet is a detailed scale model of the French Air Force Alpha Jet, it is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, removable gun pod, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in a French Air Force color scheme.

This fantastic-looking XFly 80mm EDF jet is a detailed scale model of the Dassault/Dornier Alpha Jet, this version is in the color scheme of the famous Patrouille de France aerobatic team. It is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in the classic Patrouille de France color scheme.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.

This fantastic-looking XFly 80mm EDF jet is a detailed scale model of a US Airforce T-7A Red Hawk advanced trainer. It is packed full of scale details including molded-in panel lines, simulated antenna, pitot tube, a crystal clear canopy with cockpit detail, missiles, drop tanks, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, full-flying horizontal stabs, and operational flaps.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.

The Dancing Wings Hobby S.E.5A is a detailed scale model of the famous World War 1 biplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, scale exhausts, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

H-King Viper 64 价格实惠，非常稳定，具有可预测的操控性能，是首次尝试飞行 EDF 喷气式飞机的理想选择。它拥有令人惊叹的外观，其 6S 设置的性能使其拥有极快的速度，并能进行大型喷气式机动，这使其成为经验丰富的遥控飞行员的完美运动喷气机。H-King Viper 64 基于美国 Viper 飞机公司在 20 世纪 90 年代后期设计的小型双座自制喷气式飞机。

Unleash the power and prestige of the limited edition Black Viper 64. This exclusive 6S EDF jet combines stunning looks with explosive speed and beginner-friendly stability.

Strike with style! The H-King Viper 64 EDF Jet has been reborn in a sinister new scheme for a limited edition release. Dressed in a sleek silver and black paint job with a menacing Snake Head logo, this jet is as fast as it looks. Powered by a robust 6S setup, it delivers a breathtaking turn of speed and a realistic turbine-like sound that guarantees to command attention at your flying field.

Capable of taking off from and landing on just about any surface including water, ice, snow, grass and more, the Skipper is a truly versatile model. Add to that its super low wing loading and high-performance brushless power system and you've got yourself a model that is an absolute blast to fly!