航空機

A complete replacement fuselage for the Durafly Auto-G2 V2 Gyrocopter with decal.

Please note: Although a different color scheme, this replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement horizontal stabiliser with decals for the Durafly Auto-G2 V2 Gyrocopter.

Please note: Although a different color scheme, this replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement set of wooden mast supports with linkage rods and screws for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A complete replacement Auto-Start system including motor, gearbox, flexi-shaft drive, etc for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement battery hatch for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement 4018 800KV brushless outrunner for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement set of 3 blade grip assemblies for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement main rotor plate for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement set of 3 main blades with decals for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement main landing gear for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement pair of 90mm foam main wheels with retainers for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement tail wheel assembly for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement 10x8 3-blade propeller for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement head button for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement spinner nut for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement motor cowl for the Durafly Auto-G2 V2 Gyrocopter.

A replacement set of fiber-reinforced pushrods for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement mast fairing with fixing screws for the Durafly Auto-G2 V2 Gyrocopter.

A replacement Auto-Start switch for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement 20A brushless ESC for the Durafly Auto-G2 V2 Gyrocopter includes an XT60 connector and the JST connector for the Auto-Start system.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement vertical stabiliser with decals for the Durafly Auto-G2 V2 Gyrocopter.

Please note: Although a different color scheme, this replacement part is a suitable replacement for previous versions of the Auto-G2.

在 EFX Racer 取得成功后，Durafly 决定生产迷你版，俗话说，好东西都是小包装的，于是 MFX Racer 诞生了。MFX 在设计上采用了与大型飞机相同的严格标准，并且仍然具有速度、强度、灵活性以及您对 Durafly 型号所期望的稳定性。此外，您还能享受到只有 Durafly EPO 型号才能提供的简单组装和高质量。

This beautiful model of a North American T-28 Trojan USAF Military Trainer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

This beautiful model of a Grumman F8F Rare Bear Reno Racer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

The 550mm XK A300 Beechcraft D17S is manufactured to very high standards in tough EPP foam. It is supplied ready to fly (RTF) complete with a Mode 1-2 switchable 2.4GHz 4 channel RC system, a switchable 6-axis gyro, a powerful, efficient brushless motor with ESC, 2 servos, on-board LED lights, 7.4V 600mAh battery, and a USB charging cable. Assembly is very easy and straightforward, all the necessary parts and tools are supplied to get your Staggerwing ready to fly in less than an hour, you just need to supply 6 x "AA" batteries for the transmitter.

This fantastic looking XFly 80mm EDF jet is a detailed scale model of the French Air Force Alpha Jet, it is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, removable gun pod, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in a French Air Force color scheme.

The XFLY Swift 2100 is a versatile electric-powered glider that is quite happy flying fast and doing aerobatics or is equally at home flying slowly and just floating around. To achieve this versatility the XFLY engineers have used CFD (Computer Fluid Dynamics), which has enabled the Swift 2100 to achieve a high lift-to-drag ratio and excellent aerodynamic characteristics. The factory-installed power system includes an efficient 3136-1000KV brushless motor with 40A brushless ESC and drives a 10x6 2-blade folding propeller with metal spinner. This system can be powered by either a 3S, or a 4S LiPo battery to deliver plenty of thrust for fast climbs to soaring altitudes, aerobatics, and general sport flying.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.

We have all had to start learning to fly an RC model at some point, and a stable, high-wing trainer that is very forgiving is what is required. The Dancing Wings Hobby Vogee-16 Trainer is the perfect choice for the rookie pilot. It has a large, flat-bottomed wing with dihedral which enables it to fly very slowly, and it has the stability to sort itself out if you get in a muddle. The Vogee's flying characteristics are very benign, beginners tend to over-control, and the Vogee is very gentle in its handling, especially if you install one of the readily available 3-axis gyros that are available on the market these days. It also has a tricycle landing gear with a steerable nosewheel which really helps with the take-offs and landings. This version of the Vogee is supplied with a powerful 2817-900KV brushless motor, a 60A brushless ESC, an 11" prop, 2 x 37g servos, and 2 x 17g 

The Dancing Wings Hobby Stick-14T 3D aerobatic trainer is the perfect choice for intermediate and experienced RC pilots alike. It is based on the classic stick design and is quite capable of all the usual aerobatic maneuvers, plus with the right power train, it doubles up as the perfect 3D trainer. It has a very wide speed range, it is just as happy flying slowly as it is screaming about the sky. For added fun and enjoyment, the strip ailerons are split halfway making for outboard ailerons and inboard flaps. This allows for really slow or steep approach landings, and if the flaps are mixed in with your other controls it allows you to customize the handling to suit your own flying style. 

The Dancing Wings Hobby Cute Girl laser cut balsa kit captures the type of vintage model airplane that was used in the early days of RC with radio assist. It has that classic retro look, lots of wing dihedral, band on wings, a large cabin, classic shapes to the wings and empennage, and tail dragger landing gear, all the features required for a retro classic look.

The controls are just basic 3 channels, rudder, elevator, and motor control, this keeps things nice and simple. We recommend that you power the Cute Girl with a brushless motor set-up. However, a nitro or a diesel engine can be used for that even more authentic vintage look and classic soundtrack.

The Dancing Wings Hobby Aion laser cut balsa kit is an easy-build electric sports glider that includes ailerons and flaps. The Aion is aimed at the modeler who wants to experience real model-making but wants something that is reasonably straightforward to build. This is achieved with the use of accurate laser-cut parts and the simple box-type fuselage which produce a strong, accurate, lightweight structure. The Aion is relatively easy to build, however, we do recommend that some experience in building a wood model airplane has been gained previously. Most of the components are constructed over the detailed, high-quality printed 1:1 building plan. This outstanding kit is supplied with a powerful 2216-920KV brushless motor, a 30A brushless ESC, an 11" folding prop with metal spinner, 6 x 9g servos, and an iron-on covering film pack

The Dancing Wings Hobby Savage Bobber is a small, lightweight foam model that is quick and simple to build. The full-size Savage Bobber was devised by the Zlin Aviation Company. The Bobber as in the motorcycle world means that it is a stripped-down, customized version of an original. The Savage Bobber is a stripped-down, customized version of its older brother the Savage Classic. It is lighter, more maneuverable, and has a slightly narrower fuselage, and the absence of covering to the rear of the fuselage greatly improves the crosswind handling.

The model is reasonably straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction, tough plastic for the open framework rear fuselage, and lightweight balsa for the internal structure. Carbon strips are also included to reinforce and improve the stiffness of the structure. It builds up quickly into a good-looking, fun-to-fly lightweight (only 98g) sports plane that is perfect for indoor or park flying. This ARF kit is supplied with a powerful 1108-4000KV brushless motor, 5A brushless ESC, 5" propeller, and 4 x 2g servos.