航空機

A replacement domed spinner with propeller hub assembly for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".

このバージョンのYak-11はレッドリノレーサーです。これはトータルスケールの配色ではありませんが、大まかにストレガP-51リノマスタングに基づいています。前述のように、レーサーバージョンであるため、純粋な速度のために開発されたパワートレインが付属しています。 6S LiPoパックを使用すると、付属の95A ESCと16x6プロップを備えた5052-550KVブラシレスモーターにより、Yak-11は最大125mphの驚異的な速度で回転します。これは迅速であり、この印象的なサイズのモデルが地面の近くで高速パイロンターンをしているのを見るのは見るべき光景です。曲技飛行もヤクと一緒に演奏するのが夢です。ロールは非常に軸方向であり、パワーが豊富なためループ操作は大きくなります。それが実行する曲技飛行への唯一の制限はあなたの飛行スキルです。

A replacement pair of main servoless retracts for the Durafly T-28 Trojan Naval edition. These are not supplied with the oleo legs but they will fit other versions of the Durafly Trojan 1100mm series.

A replacement nosewheel servoless retract for the Durafly T-28 Trojan Naval edition. This is supplied with the wire nose leg and steering arm and will fit other versions of the Durafly Trojan 1100mm series.

A replacement fuselage for the AVIOS Albatross V2, includes factory-applied decals, and water rudder.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement center wing section for the AVIOS Albatross V2, includes the 2 flaps.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement left-hand outer wing section for the AVIOS Albatross V2, includes decals, aileron, and aileron horn.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement right-hand outer wing section for the AVIOS Albatross V2, includes decals, aileron, and aileron horn.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement tail set for the AVIOS Albatross V2. This set includes the vertical and horizontal stabilizers, control horns, rudder, rudder servo with pushrod, and decals.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement canopy/cockpit hatch for the AVIOS Albatross V2, includes the clear window glazing.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement pair of engine/motor cowls for the AVIOS Albatross V2.

Note: These are suitable for the Albatross V1, but of course, the colors will be different.

A replacement pair of wing floats for the AVIOS Albatross V2.

Note: These are also suitable for the Albatross V1, but of course the colors are different.

A replacement clear water rudder with spring for the AVIOS Albatross V2.

Note: This is suitable for the Albatross V1 as well.

A replacement nose cone for the AVIOS Albatross V2.

Note: This is also suitable for the Albatross V1.

A replacement set of decals for the AVIOS Albatross V2 US Coast Guard Flying Boat. 

A replacement fuselage with decals and canopy for the US Coast Guard version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A replacement wing set with flaps, ailerons, and decals for the US Coast Guard version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A replacement engine nacelle and cowl for the US Coast Guard version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A replacement horizontal and vertical stabilizer set with elevators, rudder, and factory-applied decals for the US Coast Guard version of the Avios C-130 V2. Please note that this spare part is not suitable for the original versions of the C-130.

A replacement horizontal and vertical stabilizer set with elevators, rudder, and factory-applied decals for the Civilian Cargo version of the Avios C-130 V2.  Please note that this spare part is not suitable for the original versions of the C-130.

A replacement set of landing gear doors for the Civilian Cargo version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A replacement 6.5x5 4 blade standard pitch propeller with backplate and screw for both versions of the Avios C-130 V2, is also suitable for the version 1 of the C-130.

A replacement 6.5x5 4 blade reverse pitch propeller with backplate and screw for both versions of the Avios C-130 V2, is also suitable for the version 1 of the C-130.

A complete replacement nose landing gear set which includes servoless retract unit, gear doors, actuators, wiring, and housing for the US Coast Guard version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A replacement main landing gear set which includes servoless retract unit, actuating rods, wheels struts, and axles for the US Coast Guard version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A complete replacement set of decals for the Civilian Cargo version of the Avios C-130 V2.

A complete replacement set of decals for the US Coast Guard version of the Avios C-130 V2.

A replacement 2627-1000KV brushless motor with X mount and screws for both versions of the Avios C-130 V2, also suitable for the version 1 of the C-130.

A replacement prop adapter for both versions of the Avios C-130 V2, also suitable for the version 1 of the C-130.

A replacement carbon wing joining spar for both versions of the Avios C-130 V2, also suitable for the version 1 of the C-130.

A replacement set of scale detailing parts for the AVIOS KingTwin 1700.

A replacement set of 10x6 left and right propellers for the AVIOS KingTwin.

Please note: These propellers are also suitable for the AVIOS BushMule and Albatross models.

A replacement set of main and nosewheel landing gear struts for the AVIOS KingTwin. 

この見栄えが良く、見事な飛行のアビアズ・キングトウィン1700スポーツ/スケールモデルは、小さなツインターボプロップをベースにしており、世界中の軍または民間のチャーター航空会社で使用されているタイプを非常に彷彿とさせます。このタイプの飛行機で利用できる非常に多くの素晴らしい配色で、Aviosは無地の白いバージョンを作成することにしました。この無地の白い仕上げは、あなたが完全にユニークで、あなた自身の選択のオーダーメイドの配色を作り出すための完璧な空白のキャンバスを提供します。

この非常に印象的なF-16ファイティングファルコンのこのHキングバージョンは、EPOフォームで製造され、工場でデカールが事前に適用された本物のUSAFカラースキームで美しく仕上げられています。 HキングF-16は、それ自体が優れた飛行特性を備えており、レール上にあるように飛行しますが、プリインストールされたORX 6軸ジャイロはこれを別のレベルに引き上げます。あらゆるレベルの経験を持つパイロットは、中間のジャイロ設定を使用することで恩恵を受けます。これにより、特に風の強い状況で、安定性が向上し、飛行がスムーズになります。初心者や短時間のパイロットの場合、飛行安定化システムにより、飛行がさらに簡単になります。 32ビットMCUを利用して超高速制御応答を実現し、ジャイロオフ、ジャイロオン、トレーニングモードの3つの設定があります。トレーニングモードでは、ジャイロは完全な安定性を提供し、使用できるロールとピッチの量も制限します。ジャイロオンモードでは、これにより安定性がわずかに低下し、使用できるロールやピッチが制限されないため、スムーズなジェットスタイルの曲技飛行に最適です。ジャイロオフモードでは、まさにそれであり、ジャイロはまったくありません。