航空機

ホビーキングリノエーシズP-51「ギャロッピングゴースト」の交換用胴体セットには、工場で適用されたデカールが含まれています。 トップデッキ、キャノピー、カウルはこの胴体セットには付属していませんのでご注意ください。

A replacement horizontal stabilizer with elevator for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement cowl with factory-applied decals and mounting screws for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement spinner with backplate for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement wing set with servo covers, and pushrods for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".

A replacement 3108-1070KV brushless motor for the H-King Reno Aces P-51 "Galloping Ghost", this is the standard motor that is supplied with the PNF model.

A replacement 8x6 propeller for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement set of nacelle protection skid plates for the series of H-King Avro Lancasters, these will fit versions 1, 2, and 3.

このバージョンのYak-11は、現在ドイツで飛行しているフルサイズに基づいています。配色は、第二次世界大戦でロシア人のために飛行したフランスのユニットを尊重しています。上記のように、ウォーバードバージョンであるため、より多くのトルクのために開発されたパワートレインが付属しています。 6S LiPoパックを使用すると、付属の95A ESCと17x10プロップを備えた5052-410KVブラシレスモーターは、Yak-11に最大100mphの印象的な速度回転をもたらしますが、垂直性能を信じる必要があります。大規模なウォーバードの操縦は、利用可能なトルクとパワーの量で飛行するという夢であり、ローリング操縦は非常に軸方向です。フラップとホイールが下がったスロースケールのようなフライパス、または高速で機銃掃射が少なく、キューバ8の半分または同様の操作で引き上げることで見物人を感動させます。この記念の配色のYak-11は、飛行中または地面に座っているときに、あらゆる角度から見事に見えます。

ホビーキングリノエーシズP-51「ギャロッピングゴースト」のスピードとパワーをさらに高めたいですか？ 次に、このオプションのハイパワーPro 3108-1160KVブラシレスにアップグレードして、無制限の垂直性能を備えた弾道ミサイルに変えます。 付属のプロペラやESCを変更する必要はありません。どちらもこのアップグレードで問題ありません。

この非常に印象的なF-16ファイティングファルコンのこのHキングバージョンは、EPOフォームで製造され、工場でデカールが事前に適用された本物のUSAFカラースキームで美しく仕上げられています。 HキングF-16は、それ自体が優れた飛行特性を備えており、レール上にあるように飛行しますが、プリインストールされたORX 6軸ジャイロはこれを別のレベルに引き上げます。あらゆるレベルの経験を持つパイロットは、中間のジャイロ設定を使用することで恩恵を受けます。これにより、特に風の強い状況で、安定性が向上し、飛行がスムーズになります。初心者や短時間のパイロットの場合、飛行安定化システムにより、飛行がさらに簡単になります。 32ビットMCUを利用して超高速制御応答を実現し、ジャイロオフ、ジャイロオン、トレーニングモードの3つの設定があります。トレーニングモードでは、ジャイロは完全な安定性を提供し、使用できるロールとピッチの量も制限します。ジャイロオンモードでは、これにより安定性がわずかに低下し、使用できるロールやピッチが制限されないため、スムーズなジェットスタイルの曲技飛行に最適です。ジャイロオフモードでは、まさにそれであり、ジャイロはまったくありません。

A replacement pre-painted fuselage for the Durafly Me-163B V2 "White 10" with tailwheel and factory-applied decals.

Please note:  This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pre-painted canopy/battery hatch for the Durafly Me-163B V2 "White 10" with pilot, and factory-applied decals.

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pair of pre-painted wing panels for the Durafly Me-163B V2 "White 10" with elevons, and factory-applied decals.

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pre-painted vertical stabilizer for the Durafly Me-163B V2 "White 10" with rudder, and decals.

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pre-painted cowl for the Durafly Me-163B V2 "White 10".

Please note:  This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pre-painted take-off dolly with wheels for the Durafly Me-163B V2 "White 10".

Please note:  This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement spinner for the Durafly Me-163B V2 "White 10".

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement set of decals for the Durafly Me-163B V2 "White 10".

Please note:  This replacement part is also suitable for earlier versions of the Durafly Me-163.

A replacement aerial, and pitot head tube for the Durafly Me-163B V2 "White 10".

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163.

A replacement accessory set for the Durafly Me-163B V2 "White 10". Includes, hex-wrench, pushrods, snap links, control horns, and control horn mounting screws.

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163.

A replacement 2836-2200Kv brushless motor with prop adapter for the Durafly Me-163B V2 "White 10".

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163.

This beautiful model of a North American T-28 Trojan USAF Military Trainer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.

This fantastic-looking XFly 80mm EDF jet is a detailed scale model of a US Airforce T-7A Red Hawk advanced trainer. It is packed full of scale details including molded-in panel lines, simulated antenna, pitot tube, a crystal clear canopy with cockpit detail, missiles, drop tanks, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, full-flying horizontal stabs, and operational flaps.

The Dancing Wings Hobby Fokker Eindecker III is a scale model of the famous World War 1 monoplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, a dummy engine, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

The Dancing Wings Hobby S.E.5A is a detailed scale model of the famous World War 1 biplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, scale exhausts, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

A replacement canopy/battery hatch for the Durafly D.H.100 Vampire V3 RAF Camo edition.

Please note: This replacement part will also fit earlier versions of the Durafly D.H.100 Vampire.

A replacement pair of wings for the Durafly D.H.100 Vampire V3 RAF Camo edition.

Please note: This replacement part will also fit earlier versions of the Durafly D.H.100 Vampire.

A replacement set of tailbooms for the Durafly D.H.100 Vampire V3 RAF Camo edition.

Please note: This replacement part will also fit earlier versions of the Durafly D.H.100 Vampire.

A replacement horizontal stabilizer with elevator for the Durafly D.H.100 Vampire V3 RAF Camo edition.

Please note: This replacement part will also fit earlier versions of the Durafly D.H.100 Vampire.

A replacement fuselage with nosewheel fairing for the Durafly D.H.100 Vampire V3 RAF Camo edition.

Please note: This replacement part will also fit earlier versions of the Durafly D.H.100 Vampire.

The Volantex RC 4-channel P-51D Mustang is the perfect ready-to-fly small warbird that comes complete with a transmitter, receiver, integrated ESC, and built-in Xpilot stabilization system. This gyro system offers super stable flying and self-leveling which makes it perfect for early, and relatively inexperienced pilots. The gyro is switchable from the transmitter, 3 modes can be selected. The first is beginners mode which gives maximum stabilization and reduces the amount of control the pilot has, the second is intermediate, which reduces the stabilization and gives the pilot slightly more control. The final mode is no gyro stabilization and the pilot has full control authority. It also features a "One-Key" aerobatic system which makes performing aerobatics like loops and rolls a breeze, and a "One-Key" return system.