航空機

人気の高いパイパーJ-3カブを、スケールパイロット必見のスイスカラーで再現しました。このカラースキームでは、塗料の使用量を大幅に削減しているため、軽量化が図られており、すでに低い翼面荷重を実現しています。細部へのこだわりにより、非常にリアルなモデルとなっており、翼幅も1400mmと十分な大きさです。他のカブと同様、その大きな翼幅と安定した飛行特性により、非常に簡単に飛ばすことができ、低時間パイロットから上級者まで幅広くお楽しみいただけます。また、スイスカブには、事実上破壊不可能な新しいオールメタル製ランディングギアが採用されており、過酷な着陸にも耐えられるようになっています。さらなる軽量化のため、金属製の尾翼固定用ワイヤーは取り除かれ、その代わりにスケール感があり、装着しやすい軽量な伸縮性のある白いショックコードが採用されています。

ツンドラはラジコンコミュニティで確固たる地位を確立しており、今ではほとんどのラジコンパイロットにとって頼りになるモデルとなっています。中級パイロットから経験豊富なフライヤーまで、この電気ラジコン飛行機がすべてを行います。ツンドラは非常に用途の広いラジコン飛行機で、飛行がとても楽しく、優れた曲技飛行能力、STOL飛行能力、そして万能のタフさですべてのパイロットにとって非常に面白いものです。

ツンドラはラジコンコミュニティで確固たる地位を確立しており、今ではほとんどのラジコンパイロットにとって頼りになるモデルとなっています。中級パイロットから経験豊富なフライヤーまで、この電気ラジコン飛行機がすべてを行います。ツンドラは非常に用途の広いラジコン飛行機で、飛行がとても楽しく、優れた曲技飛行能力、STOL飛行能力、そして万能のタフさですべてのパイロットにとって非常に面白いものです。

ツンドラ・バージョン2は、アップグレードされた元のバージョンよりもさらに改善されています。低速での安定性を高めるために、翼の前縁にボルテックスジェネレーターが追加されました。小ネジと真ちゅう製のインサートのおかげで、足回りがより安全になり、取り付けが簡単になりました。プラスチック製の着陸装置のクロスブレースマウントは、耐久性を向上させるために金属製になりました。また、新設計のバッテリートレイも含まれています。 V2は、改良されたウィングコネクタ、ウィングマウント、アップグレードされたモーター、およびリバース付きのAerostar・40アンペアESCを引き続き保持します。

The Tundra has had a massive cult following over the years within the RC community as it's easily one of the best flying electric RC planes on the market with an impressive flight envelope. This was followed sometime later with the launch of the Grand Tundra which encompassed all your favorite features but on a larger scale. The Grand Tundra Plus keeps 99% of the features of the original version, the one change that has been made is to the wing servo connectors, these have a new design to give a stronger and more reliable connection.

The Ranger 2000 is easy to assemble and features a large wingspan which provides stability, and also allows the model to fly at slow speeds. The EPO wings are fitted with two spars for strength and each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Ranger 2400 is a large electric powered pusher glider that has been specifically designed for FPV flying.  The enormous fuselage has plenty of room for large capacity or twin battery packs, radio and stabilizer components, FPV equipment, and molded into the front just below the nose is a purpose-made provision for an FPV camera. Also included is the usual Volantex camera mount that can take the place of the black canopy if you wish. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 robust metal spars join the wings to the fuselage. Also, each of the large ailerons is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using the popular Volantex fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix V2 2000 is a quick and easy to assemble electric powered glider with flaps and large ailerons for a precise, aerobatic performance. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix 2400 is an extended wing version of the popular Phoenix 1600mm and 2000mm range of electric powered gliders. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The subject of this kit is the German liaison aircraft built during WW11, the Fieseler Fi 156 Storch. The Storch (German for "Stork") is famous for its STOL (Short Take-Off and Landing) abilities and it had an incredibly low stall speed of only 31mph. It was mainly used during WW11 for reconnaissance, spotting for the army and forward operations, and medical evacuation. Its design incorporated hinged slats along the entire length of the wings leading edge and a hinged and slotted set of control surfaces ran along each trailing edge, this was split equally to form outboard ailerons and inboard flaps. Virtually nothing about the Storch is streamlined with bits sticking out everywhere including the side windows,  this with its long undercarriage hanging down gives it a unique long-legged bird look which is why it was given the name of "Storch".

この見栄えが良く、見事な飛行のアビアズ・キングトウィン1700スポーツ/スケールモデルは、小さなツインターボプロップに基づいており、世界中の軍用または民間のチャーター航空会社で使用されているタイプを非常に彷彿とさせます。シンプルでありながら印象的な配色は、民間のプロプリナーで一般的に使用されている塗装作業の種類を表しています。

キングトウィン1700には、LEDライト、リトラクト、スプリットフラップなどのクールな機能が満載です。 Aerostar 40A ESCを備えた2x Aerostar 3748-820KVブラシレスアウトランナーのパワートレインは、慎重なテストの結果、アビアズチームによって選択されました。モーター、ESC、二重反転プロペラ、および4S LiPoバッテリーのこの組み合わせは、電力と持続時間の最適なセットアップであることが証明されました。

ウォーゴー・シグナチャー・エッジ540T 3Dは、有名な3Dパイロットであるマイケル・ウォーゴーに触発されたシリーズのもう1つの素晴らしい飛行機です。 エッジ540Tは、非常に正確な3D飛行および曲技飛行トレーニング用に特別に設計されました。私たちのチームパイロットであり、3Dの専門家であるマイケル・ウォーゴーは、他の発泡体よりも剛性が高く、軽量な発泡機を望んでいました。これは、軽量で耐衝撃性のあるEPPフォームで覆われた剛性のある軽量のバルサフレームの組み合わせによって実現されました。

ホビーキングP-51「ギャロッピングゴースト」は、ホビーキングの新しいミニシリーズ「リノエーシズ」の最初のもので、エアレースで印象的な服を着た第二次世界大戦の戦闘機です。付属のストック3108-1070KVブラシレスモーターを備えたP-51「ギャロッピングゴースト」は、推奨される2200mah 4S LiPoを使用すると、100mphに近い速度で箱から出してすぐに非常に速いモデルを提供します。ただし、経験豊富な手で時速100マイル以上の速度をお探しの場合は、オプションのドロップインフィット3108-1170KV「Pro」ブラシレスモーターがあります。これにより、見栄えの良いReno Aceは、同じプロペラ、ESC、および4Sバッテリーで、発射時に余分な回転トルクを処理できるものに対して、本当に弾道的なパフォーマンスを発揮します。

H-キングFG-1コーセア「ラッキーガロン」は、エアレースで印象的な服を着たWW2戦闘機「リーノー・エーシズ」であるH-キングのミニシリーズの3番目です。付属のストック3108-1070KVブラシレスモーターを備えたFG-1コーセア「ラッキーガロン」は、推奨される2200mAh 4S LiPoを使用すると、100mphに近い速度で箱から出してすぐに非常に高速なモデルを提供します。ただし、経験豊富な手で時速100マイル以上の速度をお探しの場合は、オプションのドロップインフィット3108-1170KV「プロー」ブラシレスモーターがあります。これにより、起動時に余分な回転トルクを処理できるものに対して、同じプロペラ、ESC、および4Sバッテリーで見栄えの良いリーノー・エースに本当に弾道的なパフォーマンスを与えることができます。

このバージョンのYak-11はレッドリノレーサーです。これはトータルスケールの配色ではありませんが、大まかにストレガP-51リノマスタングに基づいています。前述のように、レーサーバージョンであるため、純粋な速度のために開発されたパワートレインが付属しています。 6S LiPoパックを使用すると、付属の95A ESCと16x6プロップを備えた5052-550KVブラシレスモーターにより、Yak-11は最大125mphの驚異的な速度で回転します。これは迅速であり、この印象的なサイズのモデルが地面の近くで高速パイロンターンをしているのを見るのは見るべき光景です。曲技飛行もヤクと一緒に演奏するのが夢です。ロールは非常に軸方向であり、パワーが豊富なためループ操作は大きくなります。それが実行する曲技飛行への唯一の制限はあなたの飛行スキルです。

このバージョンのYak-11は、現在ドイツで飛行しているフルサイズに基づいています。配色は、第二次世界大戦でロシア人のために飛行したフランスのユニットを尊重しています。上記のように、ウォーバードバージョンであるため、より多くのトルクのために開発されたパワートレインが付属しています。 6S LiPoパックを使用すると、付属の95A ESCと17x10プロップを備えた5052-410KVブラシレスモーターは、Yak-11に最大100mphの印象的な速度回転をもたらしますが、垂直性能を信じる必要があります。大規模なウォーバードの操縦は、利用可能なトルクとパワーの量で飛行するという夢であり、ローリング操縦は非常に軸方向です。フラップとホイールが下がったスロースケールのようなフライパス、または高速で機銃掃射が少なく、キューバ8の半分または同様の操作で引き上げることで見物人を感動させます。この記念の配色のYak-11は、飛行中または地面に座っているときに、あらゆる角度から見事に見えます。

この見栄えが良く、見事な飛行のアビアズ・キングトウィン1700スポーツ/スケールモデルは、小さなツインターボプロップをベースにしており、世界中の軍または民間のチャーター航空会社で使用されているタイプを非常に彷彿とさせます。このタイプの飛行機で利用できる非常に多くの素晴らしい配色で、Aviosは無地の白いバージョンを作成することにしました。この無地の白い仕上げは、あなたが完全にユニークで、あなた自身の選択のオーダーメイドの配色を作り出すための完璧な空白のキャンバスを提供します。

信じられないほどのフレンジーは完璧なオールラウンダーです。コントロール スローを減らしたこの飛行機は、初心者や初心者に最適な、滑らかで安定した、非常に簡単に飛ばせる飛行機です。これらのスローを増やし、3S セットアップでの高いパワー対重量比により、フレンジーはその名に恥じません。幅広い驚くべき曲技飛行が可能で、最も野心的な曲技飛行パイロットの要求にも応えます。

The Hobbyking H-King Mini L-39 has been developed from an earlier version that had a 50mm fan unit. This latest rendition from RC L39 aircraft sports an uprated 64mm 8-blade EDF fan unit with a 2220-3300KV brushless outrunner motor, a 50A ESC, and uses a 4S LiPo battery instead of the original 3S setup. The full-size L-39 jet was designed in the Czech Republic as a high-performance jet trainer for performing basic to advanced pilot training. It was the first trainer aircraft in the world to be equipped with a turbofan.

在 EFX Racer 取得成功后，Durafly 决定生产迷你版，俗话说，好东西都是小包装的，于是 MFX Racer 诞生了。MFX 在设计上采用了与大型飞机相同的严格标准，并且仍然具有速度、强度、灵活性以及您对 Durafly 型号所期望的稳定性。此外，您还能享受到只有 Durafly EPO 型号才能提供的简单组装和高质量。

This fantastic looking XFly 80mm EDF jet is a detailed scale model of the French Air Force Alpha Jet, it is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, removable gun pod, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in a French Air Force color scheme.

This fantastic-looking XFly 80mm EDF jet is a detailed scale model of the Dassault/Dornier Alpha Jet, this version is in the color scheme of the famous Patrouille de France aerobatic team. It is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in the classic Patrouille de France color scheme.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.

This fantastic-looking XFly 80mm EDF jet is a detailed scale model of a US Airforce T-7A Red Hawk advanced trainer. It is packed full of scale details including molded-in panel lines, simulated antenna, pitot tube, a crystal clear canopy with cockpit detail, missiles, drop tanks, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, full-flying horizontal stabs, and operational flaps.

The XFLY Swift 2100 is a versatile electric-powered glider that is quite happy flying fast and doing aerobatics or is equally at home flying slowly and just floating around. To achieve this versatility the XFLY engineers have used CFD (Computer Fluid Dynamics), which has enabled the Swift 2100 to achieve a high lift-to-drag ratio and excellent aerodynamic characteristics. The factory-installed power system includes an efficient 3136-1000KV brushless motor with 40A brushless ESC and drives a 10x6 2-blade folding propeller with metal spinner. This system can be powered by either a 3S, or a 4S LiPo battery to deliver plenty of thrust for fast climbs to soaring altitudes, aerobatics, and general sport flying.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.

The Dancing Wings Hobby Fokker Eindecker III is a scale model of the famous World War 1 monoplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, a dummy engine, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

The Dancing Wings Hobby S.E.5A is a detailed scale model of the famous World War 1 biplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, scale exhausts, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

We have all had to start learning to fly an RC model at some point, and a stable, high-wing trainer that is very forgiving is what is required. The Dancing Wings Hobby Vogee-16 Trainer is the perfect choice for the rookie pilot. It has a large, flat-bottomed wing with dihedral which enables it to fly very slowly, and it has the stability to sort itself out if you get in a muddle. The Vogee's flying characteristics are very benign, beginners tend to over-control, and the Vogee is very gentle in its handling, especially if you install one of the readily available 3-axis gyros that are available on the market these days. It also has a tricycle landing gear with a steerable nosewheel which really helps with the take-offs and landings. This version of the Vogee is supplied with a powerful 2817-900KV brushless motor, a 60A brushless ESC, an 11" prop, 2 x 37g servos, and 2 x 17g 

The Dancing Wings Hobby Stick-14T 3D aerobatic trainer is the perfect choice for intermediate and experienced RC pilots alike. It is based on the classic stick design and is quite capable of all the usual aerobatic maneuvers, plus with the right power train, it doubles up as the perfect 3D trainer. It has a very wide speed range, it is just as happy flying slowly as it is screaming about the sky. For added fun and enjoyment, the strip ailerons are split halfway making for outboard ailerons and inboard flaps. This allows for really slow or steep approach landings, and if the flaps are mixed in with your other controls it allows you to customize the handling to suit your own flying style. 

The Dancing Wings Hobby Cute Girl laser cut balsa kit captures the type of vintage model airplane that was used in the early days of RC with radio assist. It has that classic retro look, lots of wing dihedral, band on wings, a large cabin, classic shapes to the wings and empennage, and tail dragger landing gear, all the features required for a retro classic look.

The controls are just basic 3 channels, rudder, elevator, and motor control, this keeps things nice and simple. We recommend that you power the Cute Girl with a brushless motor set-up. However, a nitro or a diesel engine can be used for that even more authentic vintage look and classic soundtrack.

The Dancing Wings Hobby Savage Bobber is a small, lightweight foam model that is quick and simple to build. The full-size Savage Bobber was devised by the Zlin Aviation Company. The Bobber as in the motorcycle world means that it is a stripped-down, customized version of an original. The Savage Bobber is a stripped-down, customized version of its older brother the Savage Classic. It is lighter, more maneuverable, and has a slightly narrower fuselage, and the absence of covering to the rear of the fuselage greatly improves the crosswind handling.

The model is reasonably straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction, tough plastic for the open framework rear fuselage, and lightweight balsa for the internal structure. Carbon strips are also included to reinforce and improve the stiffness of the structure. It builds up quickly into a good-looking, fun-to-fly lightweight (only 98g) sports plane that is perfect for indoor or park flying. This ARF kit is supplied with a powerful 1108-4000KV brushless motor, 5A brushless ESC, 5" propeller, and 4 x 2g servos.

The Dancing Wings Hobby Shining is a large lightweight profile-style foam kit that is quick and simple to build. It has been designed to be the perfect introduction to 3D flying and will perform extreme 3D maneuvers such as waterfalls, harriers, knife-edge loops, rolling circles, and much more.

The model is very straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction so the parts count is quite low, and carbon strips are supplied for strengthening. It builds up quickly into a good-looking, fun-to-fly lightweight extreme sport 3D plane that is perfect for park flying and on playing fields. This ARF model is supplied with a powerful 2216-950KV brushless motor, 30A brushless ESC, 10" propeller, and 4 x 9g servos.