航空機

プライムツンドラPT1200で「ツンドラウェイを飛ぶことを学ぶ」。これは、ダーラフリーからの非常に人気のあるSTOL（短距離離着陸）飛行機のさらに別の追加ですが、これは主に初心者を対象としていますが、これに限定されません。 PT1200は、ツンドラ系統の優れたSTOL飛行特性を継承しているため、このスタイルの飛行に乗りたい人に最適なSTOLトレーナーであり、熟練したツンドラファンにとっても非常に楽しいものです。

遠い領域でキングスによって鍛造された伝説のエクスカリバーは、尊敬される力であることが証明されています。まったく新しい目を引く、ハイビズの配色、改良されたプロペラアセンブリ、金属ギアのサーボ、さらに多くのカーボンとグラスファイバーの補強を含む更新バージョンで利用できるようになりました。エクスキャリバーV2が登場しました。その革新的なデザインは、カンチレバー後退翼、V尾翼の尾翼、信じられないほど強力な構造、見事なラインなどを備えています。

アビアズアルバトロスHU-16は、大きなモノハルと翼が浮かぶ美しい双発飛行艇で、船体の前部の下全体がプラスチックで補強されています。これにより、芝生の飛行場を使用して飛ぶことのノックや前髪を喜んで受けることができますが、前述のように、お気に入りの湖や水路から操作する場合は、実際にそれ自体が機能します。ウォーターラダーと付属のエロースターフォワード/リバース耐水性ESCを使用すると、タキシングと離陸のための整列がはるかに簡単になります。内蔵のフラップは十分なリフトを提供し、着陸と離陸をはるかに簡単で非常にスケールのようにします。

A replacement decal set for the H-King Yak-11 Commemorative Russian WW2 Warbird.

This is a replacement spinner for the H-King Yak-11 Red Reno Racer.

This is a replacement motor cowl for the H-King Yak-11 Red Reno Racer.

ホビーキングリノエーシズP-51「ギャロッピングゴースト」のスピードとパワーをさらに高めたいですか？ 次に、このオプションのハイパワーPro 3108-1160KVブラシレスにアップグレードして、無制限の垂直性能を備えた弾道ミサイルに変えます。 付属のプロペラやESCを変更する必要はありません。どちらもこのアップグレードで問題ありません。

A replacement pair of main servoless retracts for the Durafly T-28 Trojan Naval edition. These are not supplied with the oleo legs but they will fit other versions of the Durafly Trojan 1100mm series.

A replacement nosewheel servoless retract for the Durafly T-28 Trojan Naval edition. This is supplied with the wire nose leg and steering arm and will fit other versions of the Durafly Trojan 1100mm series.

A replacement fuselage for the AVIOS Albatross V2, includes factory-applied decals, and water rudder.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement center wing section for the AVIOS Albatross V2, includes the 2 flaps.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement left-hand outer wing section for the AVIOS Albatross V2, includes decals, aileron, and aileron horn.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement right-hand outer wing section for the AVIOS Albatross V2, includes decals, aileron, and aileron horn.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement tail set for the AVIOS Albatross V2. This set includes the vertical and horizontal stabilizers, control horns, rudder, rudder servo with pushrod, and decals.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement canopy/cockpit hatch for the AVIOS Albatross V2, includes the clear window glazing.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement pair of engine/motor cowls for the AVIOS Albatross V2.

Note: These are suitable for the Albatross V1, but of course, the colors will be different.

A replacement pair of wing floats for the AVIOS Albatross V2.

Note: These are also suitable for the Albatross V1, but of course the colors are different.

A replacement clear water rudder with spring for the AVIOS Albatross V2.

Note: This is suitable for the Albatross V1 as well.

A replacement nose cone for the AVIOS Albatross V2.

Note: This is also suitable for the Albatross V1.

A replacement set of decals for the AVIOS Albatross V2 US Coast Guard Flying Boat. 

A replacement fuselage for the Excalibur V2 Hotliner/Slope Soarer, also suitable for the Excalibur V1.

A replacement decal set for the Excalibur V2 Hotliner/Slope Soarer, also suitable for the Excalibur V1.

A replacement wing set including wing joining spars for the Excalibur V2 Hotliner/Slope Soarer, also suitable for the Excalibur V1.

A replacement spinner and propeller hub assembly for the Excalibur V2 Hotliner/Slope Soarer, also suitable for the Excalibur V1.

A replacement pair of 13x8 folding propeller blades for the Excalibur V2 Hotliner/Slope Soarer, also suitable for the Excalibur V1.

A replacement set of pushrods, ball links, quick-keepers, nuts and bolts, and screws for the Excalibur V2 Hotliner/Slope Soarer, also suitable for the Excalibur V1.

A replacement pair of main landing gear retaining plates for the Durafly Tundra V2/V3 and Night Tundra.

Note: This replacement spare part for the Durafly Tundra V2 is not compatible with the Tundra V1.

A replacement pre-painted fuselage for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement main wing with pre-hinged ailerons for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement horizontal stabilizer with elevator, and carbon spar for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement pre-painted canopy for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement pre-painted FPV canopy/mount for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement 10x6 propeller for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement pre-painted motor cowl for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.