Энергетические системы

The ER6GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER6G features a dual-antenna with telemetry power of up to 50mw and works quite happily with a 1S Lipo receiver battery.

The ER8G receiver has been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8G features a dual-antenna with telemetry power up to 100mw and works quite happily with a 1S Lipo receiver battery.

The ER8G receiver has been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8G features a dual-antenna with telemetry power of up to 100mw and works quite happily with a 1S Lipo receiver battery.

The ER8GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8GV features a dual-antenna with telemetry power of up to 100mw and works quite happily with a 1S Lipo receiver battery.

The ER8GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8GV features a dual-antenna with telemetry power of up to 100mw and works quite happily with a 1S Lipo receiver battery.

The RADIOMASTER Pocket is a small, lightweight radio that packs a big punch and is full of features. It is available in two versions, ExpressLRS and CC2500 (see "Specs" for details), and both versions come with the cutting-edge EdgeTX firmware preinstalled. Also, both versions are available in either an FCC version or a European LBT version, once again, please check the "Specs" below for the supported protocol. For easy transport and storage, the lightweight Pocket transmitter is equipped with removable stick ends and a foldable antenna. It is also compatible with the popular 18650 batteries, these provide a long battery life for hours and hours of fun.

The RadioMaster Ranger is the pinnacle of ExpressLRS module design, it is not only built to last but looks great as well. It has a rugged CNC machined aluminum case that aids the high-efficiency cooling system as a heat sink. Other features are a state-of-the-art high-contrast OLED display, a directional menu key, and two assignable shortcut keys, this makes the Ranger easily adjustable while flying. The Ranger ELRS module is up to any task and provides all the necessary power and functionality.

The RadioMaster Ranger is the pinnacle of ExpressLRS module design, it is not only built to last but looks great as well. It has a rugged CNC machined aluminum case that aids the high-efficiency cooling system as a heat sink. Other features are a state-of-the-art high-contrast OLED display, a directional menu key, and two assignable shortcut keys, this makes the Ranger easily adjustable while flying. The Ranger ELRS module is up to any task and provides all the necessary power and functionality.

Want to experience the efficiency, long range, and low latency of the ELRS protocol without purchasing a new radio? Then RADIOMASTER has you covered!

The Ranger Nano 2.4GHz ELRS module represents the cutting edge in ELRS technology, and it's compatible with the RADIOMASTER Zorro series and more. It features F-1000Hz refresh rates, a high-efficiency cooling system, WiFi, and Bluetooth connectivity, and a T antenna. Enjoy all that ELRS has to offer with a RADIOMASTER Ranger Nano TX module.

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP1 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the V2 are an upgraded rigid antenna with a UFL socket and improved solder pads.

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP2 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the RP2 V2 are improved solder pads and a super lightweight built-in ceramic antenna.

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP2 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the RP2 V2 are improved solder pads and a super lightweight built-in ceramic antenna.

The RP3 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The ExpressLRS development team designed the Nano receivers, which feature the ESP8285 MCU and SX1280 RF chips. This offers Lora and FLRC 2.4GHz RF links for incredible range and low latency. WiFi is built-in to easily upgrade the firmware and configure the receiver using your PC or mobile phone.

The receiver features a Skyworks SE2431L providing an LNA for improved receiver performance, a PA providing up to 100mW of telemetry performance, and antenna switching for antenna diversity.. The RP3 Nano receiver is available in either an FCC or a European LBT version, please check the specifications below for the supported protocol.

The RP3 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The ExpressLRS development team designed the Nano receivers, which feature the ESP8285 MCU and SX1280 RF chips. This offers Lora and FLRC 2.4GHz RF links for incredible range and low latency. WiFi is built-in to easily upgrade the firmware and configure the receiver using your PC or mobile phone.

The receiver features a Skyworks SE2431L providing an LNA for improved receiver performance, a PA providing up to 100mW of telemetry performance, and antenna switching for antenna diversity.. The RP3 Nano receiver is available in either an FCC or a European LBT version, please check the specifications below for the supported protocol.

The RADIOMASTER MT12 is a pioneering open-source surface radio, and the first surface radio officially supported by the EdgeTX and ExpressLRS multi-module project. The MT12 is available as either an ELRS or 4-in-1 multi-module version (see specs) and boasts 10 physical inputs, and the capability to handle either 16 or 32 channels (4-in-1 version only). The ELRS (ExpressLRS) version is designed to provide a reliable long-range, ultra-fast response, super low latency, and high refresh rates. ELRS is a revolutionary open-source protocol taking the R/C industry by storm. Each version is also available in either an FCC version or a European LBT version, please check the specifications below for the supported protocol.

A replacement standard rotation 9g metal geared servo with 100mm servo lead for XFLY models.

A replacement standard rotation 9g metal geared servo with 200mm servo lead for XFLY models.

A replacement reverse rotation 9g metal geared servo with 200mm servo lead for XFLY models.

This incredible transmitter, receiver combo is the perfect partner for almost everything you want to control on the surface. Whether it is a large or small car or buggy, multi-function crawler, tank, or boat, the DumboRC DDF-350 will handle them all and more. The amount of features is phenomenal, here are just a few: It supports complex tank mixing, real-time voltage telemetry up to 40 meters, has 10 model memories, steering and throttle curves, head tracking function, winch control function, trainer system and a range of 350 meters. The DDF-350 is a steer-wheel type transmitter with a foam grip for non-slip driving and a trigger for throttle and brake functions.

The DumboRC DDF-350  is supplied with the popular XRDC 6ch receiver. This receiver includes an LED light module which gives you features such as stop lamps, flashing lights, turn indicators, etc. The receiver is also splash-proof, making it perfect for all manner of uses and in most types of conditions.

Description:
Item NO.: CYS-S8220
Description : 9g digital servo for 450 classes helicopter
Size : 23*12*25.4MM
Torque : 1.8Kg.cm ~ 2.5Kg.cm
Speed : 0.11sec ~ 0.09sec/60 degree
Voltage : 4.8Volts ~6.0Volts
Weight : 14± 1 g

Description:
Item NO.: CYS-S3019 MG
Description : 17G Digital servo with metal gear for airplane
Size : 37.66*13.3*33.8MM
Torque : 3.0Kg.cm ~ 3.4Kg.cm
Speed : 0.13sec ~ 0.09sec/60 degree
Voltage : 6.0Volts ~7.4Volts
Weight : 23± 1 g

The 22 series digital servo CYS-S2213 is designed to deliver top-notch performance in a sleek package. Outfitted with high-strength titanized gears, this servo offers exceptional durability and smooth gear engagement. It provides a powerful torque output of 13kg.cm, ideal for handling challenging tasks with ease. The servo is also built for speed, achieving a rapid transit time of 0.11sec/60º for responsive and accurate control.

Description:
Item NO.: CYS-BLS5507 Low profile digital servo
Description : Brushless drifted servo motor for 1/10 RC car
Size : 40*20*25.2MM
Torque : 7.0Kg.cm ~ 8.0Kg.cm
Speed : 0.06sec ~ 0.05sec/60 degree
Voltage : 6.0Volts ~7.4Volts
Weight : 43± 1 g

Description:
Item NO.: CYS-S0150 15Kg standard size servo
Description : 15Kg servo motor for rc car-rc boat-rc plane
Size : 40.5*20*38MM
Torque : 14Kg.cm ~ 15Kg.cm
Speed : 0.17sec ~ 0.15sec/60 degree
Voltage : 6.0Volts ~7.4Volts
Weight : 58± 1g

The Turnigy TWIN X14 is a robust radio system, featuring a unique colour exclusive to HobbyKing. It comes preloaded with HobbyKing planes, ensuring a seamless setup straight out of the box. The TWIN X14 has the capability of utilizing dual 2.4GHz frequencies simultaneously on the same receiver when using the TW mode. This is different from standard active-standby redundancy solutions, as the TW active protocol ensures that both 2.4GHz frequency bands are actively being used by the internal RF module and the receiver simultaneously.

Equipped with two internal 2.4G RF antennas, the TWIN X14 offers expansive multi-directional coverage for transmitting signals. These attributes, along with the exterior antenna, make the Twin system highly reliable with less latency, higher reliability, and faster data rates. In addition to the TW mode, the TWIN X14 also supports ACCST D16 and ACCESS modes, meaning users can benefit from a wide range of compatible receiver options.

A semi-rigid carry case that will protect your Turnigy  X14 or X14S transmitter. This is a genuine and well-made FrSky product that includes pre-cut foam inserts to fit your transmitter perfectly.

Specs:
Type: Turnigy  EVA Soft Carry Case
Suits: FrSky X14 & X14S transmitters
Color: Black

Included:
1 x Turnigy EVA Soft Carry Case for X14/X14S Transmitters (Black)

A strong, well-made neck strap that suits a multitude of transmitters including the FrSky X14 series and many, many more. It includes the Turnigy logo, a quick-release connector, and a sliding, clasp to hook onto the transmitter neck strap attachment.

The FrSky TW R8 is an 8-channel, dual 2.4GHz frequency receiver with SBUS/FBUS/S.Port, and 8 PWM channels. These TWIN series receivers feature a stable TW protocol that benefits from simultaneously integrating dual active 2.4GHz frequency bands. The TW active-active protocol is different from the general active-standby redundancy solutions used by other manufacturers. This is where one receiver takes over signal control only when the other goes into failsafe mode. With the TW protocol, the dual/twin 2.4GHz frequency bands on the TW series receiver are active all the time.

The FrSky TW R6 is a 6-channel, dual 2.4GHz frequency receiver with SBUS/FBUS/S.Port, and 6 PWM channels. These TWIN series receivers feature a stable TW protocol that benefits from simultaneously integrating dual active 2.4GHz frequency bands. The TW active-active protocol is different from the general active-standby redundancy solutions used by other manufacturers. This is where one receiver takes over signal control only when the other goes into failsafe mode. With the TW protocol, the dual/twin 2.4GHz frequency bands on the TW series receiver are active all the time.

A replacement 13g metal-geared servo for the Avios Kobuz Sports-Scale Aerobatic Glider. Used for the ailerons, rudder, and elevator controls.

A replacement 9g metal-geared flap servo for the Avios Kobuz Sports-Scale Aerobatic Glider. 

The 9iMOD BLS-HV20KG-180 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 20kg, and a speed of 0.06sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to 180° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV20KG-270 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 20kg, and a speed of 0.06sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to a whopping 270° which makes it even more versatile for loads of uses other than RC cars including robotics, etc.

The 9iMOD BLS-HV30KG-180 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 30kg, and a speed of 0.075sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to 180° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV30KG-270 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 30kg, and a speed of 0.06sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to 270° which makes it even more versatile for loads of uses other than cars including robotics, etc.