Энергетические системы

These are a good quality servo Y lead with the Futaba style 1 x male and 2 x female connectors fitted. These Y leads are perfect for running 2 servos from the one receiver servo port.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has a low internal resistance, excellent heat dissipation, and multiple protection features (see features below). It can be easily programmed with the optional pocket-sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force, and 3 Start Modes.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has a low internal resistance, excellent heat dissipation, and multiple protection features (see features below). It can be easily programmed with the optional pocket-sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force, and 3 Start Modes.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has a low internal resistance, excellent heat dissipation, and multiple protection features (see features below). It can be easily programmed with the optional pocket-sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force, and 3 Start Modes.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has low internal resistance, excellent heat dissipation and multiple protection features (see features below). It can be easily programmed with the optional pocket sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force and 3 Start Modes.

The pocket sized Trackstar LED program card has been specifically designed to work with the brushed Trackstar crawler ESCs. It is very easy and intuative to use and makes the programming of the Trackstar brushed ESC's a simple matter.

High gain, high sensitivity RF components are used throughout, this coupled with FLYSKY's latest generation intelligent wireless 2.4GHz AFHDS 3 protocol, enables the receiver to reject interference easily, while maintaining high reception rates, and stable performance. This version 2 FGr4 supports PPM, i-BUS, and 4 PWM data outputs (CH1~CH4), and an input for connecting additional sensors. Another feature of this quality FLYSKY receiver is the ability to handle a wide input voltage, anything from 3.5-12V can be used, and the case has a sealing gasket which makes it water-resistant.

Volantex Ranger 1600 and Phoenix 1600 Replacement 2212-1400KV Brushless Motor.

Power HD servos are reknown for build quality and reliability, the TR-4 micro digital waterproof servo is no exception. This servo is perfect for smaller models such as crawlers, buggies, boats and even water/float planes where waterproofing is necessary. The case is sealed with rubber gaskets and O rings and the gear train is metal except for one sacrificial plastic gear. This helps stop permanent damage being done to the servo in the case of a really hard knock. The servo is supplied with 2 x single arm output horns and an M3 servo horn screw.

A pair of replacement Aerostar 40A ESCs with wiring and connectors for the AVIOS KingTwin 1700.

A replacement Aerostar 3748-820KV brushless motor with mount and connectors for the AVIOS KingTwin 1700.

An excellent open carbon brush gear 540 35T motor that has been designed for, and is perfect for RC crawlers. Having the brush gear open means that maintenance, cleaning, and brush changing is a very simple task. The low 1320KV means masses of low down torque which makes it ideal for climbing steep and rough terrain at controllable low speeds.

This SH Engines R5 (Medium Cold) glow plug is perfect for .12~.36 size engines using 16~36% nitro fuels.

Custom-made propeller adapter and X motor mount for the Turnigy G90 series of brushless motors. Pack includes the mounting screws for the propeller adapter and motor mount.

The FGr8B surface micro receiver adopts FLYSKY's third-generation automatic frequency hopping digital system (AFHDS 3), it is perfectly suited to their range of PL18, NB4, and NB4 Lite transmitters. It uses a single antenna bidirectional transmission system that is uniquely designed to install and output PWM/PPM, and iBUS in signals.

A replacement 3719-770KV brushless motor with prop adapter and X-Mount for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

PROPDRIVE v2 motors are designed to perform right out of the box with tight windings, smooth bearings, correctly rated magnets, precision cut stator, and balanced rotors.

We design and build the PROPDRIVE v2 motors in-house, allowing us to control every aspect of production. We control the entire production line from material sourcing to machining, balancing, and final assembly. PROPDRIVE motors can be trusted to provide years of reliable service at a price every modeler can afford.

Performance Data (5S):
15x6: 796W, 45A, 3338g static thrust
15x8: 970W, 56A, 4151g static thrust
16x7: 1053W, 60A, 4259g static thrust

Performance Data (6S):
13x6.5: 896W, 42A, 3567g static thrust
13x8: 1042W, 50A, 4214g static thrust
14x7: 1170W, 56A, 4439g static thrust

A replacement 3720-900KV brushless motor with prop shaft for the H-King MX2 Extreme 30E.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Plush-32 Brushless ESC programming card is designed to make life easy. No more listening to the beeps, and guessing when to move your throttle to make changes to your ESC settings. This programming card changes settings with the press of a button, and easy-to-read LED’s let you know exactly how your ESC has been programmed. This programming card is a must for your Plush-32 series brushless ESC.

Now with the updated Rev1.1.0 firmware, this program card offers a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available for the 150A ESC). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this delay can be set from between 1 and 10mins using this program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use this programming card to program earlier versions of the Plush 32 series but only ESC's with the Rev1.1.0 firmware will show the revised functions.

Сменный бесщеточный двигатель 3648-700KV с переходником пропеллера для H-King Swiss J-3 Piper Cub.

Обратите внимание: эти детали подходят к предыдущим версиям H-King 1400mm J-3 Cub, цвета, если применимо, конечно, будут другими.

ホビーキングリノエーシズP-51「ギャロッピングゴースト」の交換用3108-1070KVブラシレスモーター。 これは、PNFモデルに付属している標準モーターです。

The FTr10 adopts FLYSKY's third-generation automatic frequency hopping digital system, AFHDS 3. It uses a double-antenna, bidirectional transmission system to save space and supports standard PPM, S-Bus, and i-Bus signals.

The FTr10 is a small, lightweight 2.4GHz receiver that will accept a wide input voltage of between 3.5~18V, has an incredible range in interference-free open areas of up to 10km, and its unique design includes i-BUS, S-BUS, PPM, PWM, and UART data ports. It has the ability to update firmware online and is compatible with the FLYSKY Paladin PL18 radio system. With all these features it is the perfect choice for drone flying, drone racing, FPV, and other long-range applications.

The FTM302 adopts FLYSKY's third-generation automatic frequency hopping digital system, AFHDS 3. It uses a single antenna, a bidirectional transmission system in a compact design with support for multiple signal inputs. Supports external power and is compatible with standard JR-type module bays.

The FTM302 offers a long range of up to 3.5km + on the EU default setting of 20dBm (changeable through the management system), low latency, less than 10ms, and allows for online updates and managing the module via the FLYSKY Remote Control Assistant. Power to the module can either be internal, or an external power source of 5~28V can be connected via the built-in XT30 connector. The module also has a built-in fan which automatically turns on if the temperature reaches 45°C to ensure the system remains safe, this can happen when the module is being used with higher voltages.

The FTr4 adopts FLYSKY's third-generation automatic frequency hopping digital system, AFHDS 3. It uses a single antenna, bidirectional transmission system to save space and supports standard PPM, S-Bus, and i-Bus signals.

The FTr4 is a small, lightweight 2.4GHz receiver that will accept an input voltage of between 3.5~8.4V, has a range in interference-free open areas of up to 500m, and its unique design includes i-BUS, S-BUS, PPM, and PWM data ports. It has the ability to update firmware online and is compatible with the FLYSKY Paladin PL18, and NB4 radio systems. With all these features it is the perfect choice for drone flying, gliding, and small fixed-wing aircraft.