$2 - $4.99

Aluminium Rear Bumper Type A - OH35A01 for the 1/35 Rock Crawler.

PGYTECH Lens filters can make all the difference to the quality of the video or pictures that the MAVIC PRO takes. These exceptional filters easily screw onto the camera lens.

This kit comes complete with the FrSky Taranis X-Lite BRACE. There are also red replacement gimbal stick ends in two sizes, short and long, depending on your needs.

This bearing detergent is the perfect partner to Mini Vibrating Cleaning Unit. Mix this detergent with water for removing grease, dust and other contaminants from bearings, gears, watch parts, jewelry and lots of other small intricate parts.

A simple device that protects the sticks of your DJI Mavic 2 transmitter when being travelling in it's case. Made of tough ABS and finished in a two tone gray that matches the Mavic 2.

This lens hood for the Mavic 2 very effectively suppresses lens flare, stray light entering the lens and also protects the gimbal from accidental damage. The "U" shaped design with extended shade minimizes vignetting (reduction of an image's brightness or saturation) and undesired color effects. The lens hood is made of high quality tough ABS plastic for durability and is supplied in a gray color that compliments the drone itself. The lens hood is quick and easy to install due to the quick mount design.

There is nothing like the sound of a 12 blade EDF. These are made from strong composite materials.

There is nothing like the sound of an 11 blade EDF. These are made from strong composite materials.

There is nothing like the sound of an 11 blade EDF. These are made from strong composite materials.

Keep your car running smoothly with these high-quality spare parts designed specifically for the Blaze 1/10 Scale Cars. These 6-degree caster blocks work with the DCJ conversion as an option for different caster settings.

This compact F3 Flight Controller includes a FrSky receiver unit and 4 integrated 20A ESCs. It utilizes the DShot 600 protocol (Betaflight compatible) to communicate between the flight controller and the ESCs, proven and tested sensors, and a next-generation CPU. This small, lightweight package delivers reliability and incredible flight performance.

Specs:
Input Voltage: 2-3S (they may handle 4S)
Receiver: FrSky compatible
ESC Protocol: DShot 600
ESC Output: 4 x 20A
Power Input Connector: JST
Dimensions: 20mmx20mm

HydroPro Inception Brushless RTR Deep Vee Racing Boat Replacement Hatch Sealing Rubber Gasket (2pcs).

HydroPro Inception Brushless RTR Deep Vee Racing Boat Replacement Stainless Steel Turn Fins w/Mounting Set.

HydroPro Inception Brushless RTR Deep Vee Racing Boat Replacement Stainless Steel Trim Tabs w/Mounting Set.

XT30U Silicone Charge Lead with 4mm Banana Plugs.

Nylon T-Connector Male (10pcs).

This SH Engines R5 (Medium Cold) glow plug is perfect for .12~.36 size engines using 16~36% nitro fuels.

An excellent, low resistance, flexible silicone charge lead with standard 4mm banana plugs on one end and a set of XT150/AS150 on the other. The Amass XT150/AS150 is a 7mm anti-spark connector rated at up to 150amps, and the 4mm banana plugs suits most chargers on the market today.

Specs:
Battery Connector: XT150/AS150 (7mm)
Charger Connection: 4mm Banana Plug
Wire Diameter: 14AWG
Wire: Tinned copper
Wire Insulation: Silicone rubber
Length: 300mm
Weight: 37.3g

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC3 connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

A strong, flexible, transparent fuel tank that is suitable for most types of RC models. The fuel tank includes a machined metal cap with fuel feed, a flexible fuel feed pipe with clunk weight, and 2 factory-installed machined metal 90° hose attachment nipples. One of these is for filling the tank, and the other is used for pressure or venting. Each fuel tank comes with a Turnigy sticker that includes the capacity of the tank, this can be attached to the tank in a convenient position to remind you of its size. The fuel tank is suitable for use with both gas and nitro fuels.

Высококачественная двусторонняя лента, которая идеально подходит для закрепления сервоприводов, приемников и многих других предметов в ваших моделях. Он изготовлен из амортизирующего пенополиэтилена с прочным акриловым клеем, нанесенным с обеих сторон. Этот пенополиуретан идеально подходит для изоляции чувствительных электронных компонентов от вибрации. Другие особенности ленты - водостойкость, термостойкость и защита от ультрафиолета.

5X3 пропеллеры (5шт / мешок)

Превосходное качество Нейлон Spinner с Облегченный сплава Backplate 70мм желтый - горы отверстие 8мм

Деревянные 15x4.5 пропеллер ( 1 шт / мешок)