Легковые автомобили

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has a low internal resistance, excellent heat dissipation, and multiple protection features (see features below). It can be easily programmed with the optional pocket-sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force, and 3 Start Modes.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has a low internal resistance, excellent heat dissipation, and multiple protection features (see features below). It can be easily programmed with the optional pocket-sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force, and 3 Start Modes.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has low internal resistance, excellent heat dissipation and multiple protection features (see features below). It can be easily programmed with the optional pocket sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force and 3 Start Modes.

EAZYRC 1/18 Arizona предлагает отличные внедорожные характеристики благодаря 4-колесному приводу, независимой подвеске и мощному двигателю. Эта моторная установка обеспечит постоянную мощность с большим количеством резервов для подъема на холм и скалолазания.

Arizona поставляется «Ready to Run» и включает в себя двигатель, ESC, сервопривод рулевого управления, а также передатчик и приемник 2.4 ГГц. Пульт дистанционного управления предлагает полностью пропорциональное рулевое управление и контроль скорости, а также поставляются полнофункциональные светодиодные фонари для реалистичного масштабного эффекта. Благодаря входящим в комплект резиновым шинам с высоким сцеплением вы можете легко покорять любую местность, включая песок, грязь, траву и снег.

1:18 scale Rock Crawlers have become very popular over the last few years, FMS has become part of this fast-growing side of the RC hobby with this incredible, officially licensed classic 4WD Toyota FJ Cruiser. FMS is one of the most experienced RC manufacturers on the market today, and this replica's attention to detail is second to none. The full-size retro-style FJ Cruiser SUV concept arrived in the early 2000s, the designers wanted to resurrect the popular traits of the iconic FJ40. The FMS 1:18 scale replica perfectly captures the essence of the full-scale Toyota FJ Cruiser design. The accurate details include the classic yellow and white paint scheme, the scale roof luggage rack, snorkel, footrests, heavy-duty front bumper, and spare tire. The realism continues into the interior with the detailed center console, rearview mirror, and authentic-looking seats.

1:24 scale Rock Crawlers have become very popular over the last few years, FMS has become part of this fast-growing side of the RC hobby with this meticulously designed small, but mighty FCX24 Power Wagon. FMS is one of the most experienced RC manufacturers today, and this replica's attention to detail is second to none. The full-size Power Wagon originally started production in 1945, the FMS version depicts the type that became available in around 1949. This model perfectly captures the essence of the full-scale Power Wagon design, which appeared as a mud off-road truck. Its realism is beyond expectations with the accurate details including, non-slip footplates, snorkel, windscreen wipers, and spare (useable) wheel and tire.

1:24 scale Rock Crawlers have become very popular over the last few years, FMS has become part of this fast-growing side of the RC hobby with this Chevrolet officially authorized FCX24 K5 Blazer. FMS is one of the most experienced RC manufacturers today, and this replica's attention to detail is second to none. Chevrolet's first-generation K5 Blazer appeared in 1969 and was the most compact SUV on the market at the time. It was designed as a sport utility vehicle with excellent off-road ability and opened up the joy of adventure and the great outdoors to many, many people. This FMS model perfectly captures the essence of the full-scale K5 Blazer design, its realism is beyond expectations with accurate details including a detachable rear cargo bed hardtop, large diameter wheels, rearview mirrors, roll-bar w/lights (for when the hardtop is removed), and special electroplated parts including the wheels to add amazing realism.

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized bearings are used for durability. The stator has super thin (0.2mm) laminations, and the rotor is then precision balanced for reliability, and ultra-smooth running at maximum RPMs.

The Rocket Surpass 4076-2025KV motor has been specially built for 1/8th scale monster trucks and truggies. This 4-pole, 12-slot high-torque motor is water and dust-proof and features a universal mounting system to fit just about all 1/8th-scale vehicles.

This Turnigy Nano-Tech 2S 350mAh battery is the perfect battery pack for the FMS range of 1/24th RC crawlers, it can also be used in the 1/18th, but it will give a shorter run time. It is lightweight (only 20g) and is supplied with a Molex 2P connector, so it is compatible with most other small crawlers as well.

Specs:
Type: Turnigy TrackStar Modified 540 Sensored Brushless Motor
Scale: 1/10th (modified class)
Poles: 2
Turns: 4.5
KV: 7800KV
Sensored: Yes (Standard 6-pin lead)
Sensor Lead: Included
Input Voltage: 3.7~7.4V (1~2S)
Max Current: 108A
Max Watts: 490
Resistance: 0.0029 ODM
Motor Diameter: 35.8mm
Motor Length: 52mm
Shaft Diameter: 3.175mm
Shaft Length: 13.9mm
Mounting Screw Threads: 6 x M3
Mounting Screw Centers: 25.2mm
Weight: 165g

Specs:
Type: Turnigy TrackStar Modified 540 Sensored Brushless Motor
Scale: 1/10th (modified class)
Poles: 2
Turns: 5.5
KV: 6300KV
Sensored: Yes (Standard 6-pin lead)
Sensor Lead: Included
Input Voltage: 3.7~7.4V (1~2S)
Max Current: 108A
Max Watts: 430
Resistance: 0.0041 ODM
Motor Diameter: 35.8mm
Motor Length: 52mm
Shaft Diameter: 3.175mm
Shaft Length: 13.9mm
Mounting Screw Threads: 6 x M3
Mounting Screw Centers: 25.2mm
Weight: 165g

Specs:
Type: Turnigy TrackStar Modified 540 Sensored Brushless Motor
Scale: 1/10th (modified class)
Poles: 2
Turns: 8.5
KV: 4350KV
Sensored: Yes (Standard 6-pin lead)
Sensor Lead: Included
Input Voltage: 3.7~11.1V (1~3S)
Max Current: 80A
Max Watts: 340
Resistance: 0.0098 ODM
Motor Diameter: 35.8mm
Motor Length: 52mm
Shaft Diameter: 3.175mm
Shaft Length: 13.9mm
Mounting Screw Threads: 6 x M3
Mounting Screw Centers: 25.2mm
Weight: 165g

Specs:
Type: Turnigy TrackStar Modified 540 Sensored Brushless Motor
Scale: 1/10th (modified class)
Poles: 2
Turns: 10.5
KV: 4300KV
Sensored: Yes (Standard 6-pin lead)
Sensor Lead: Included
Input Voltage: 7.4~11.1V (2~3S)
Max Current: 63A
Max Watts: 250
Resistance: 0.0151 ODM
Motor Diameter: 35.8mm
Motor Length: 52mm
Shaft Diameter: 3.175mm
Shaft Length: 13.9mm
Mounting Screw Threads: 6 x M3
Mounting Screw Centers: 25.2mm
Weight: 160g

Specs:
Type: Turnigy TrackStar Stock 540 Sensored Brushless Motor
Scale: 1/10th (stock class)
Poles: 2
Turns: 13.5
KV: 3600KV
Sensored: Yes (Standard 6-pin lead)
Sensor Lead: Included
Input Voltage: 7.4~11.1V (2~3S)
Max Current: 48A
Max Watts: 190
Resistance: 0.0219 ODM
Motor Diameter: 35.8mm
Motor Length: 52mm
Shaft Diameter: 3.175mm
Shaft Length: 13.9mm
Mounting Screw Threads: 6 x M3
Mounting Screw Centers: 25.2mm
Weight: 158g

Specs:
Type: Turnigy TrackStar Stock 540 Sensored Brushless Motor
Scale: 1/10th (stock class)
Poles: 2
Turns: 17.5
KV: 2850KV
Sensored: Yes (Standard 6-pin lead)
Sensor Lead: Included
Input Voltage: 7.4~11.1V (2~3S)
Max Current: 34A
Max Watts: 130
Resistance: 0.0368 ODM
Motor Diameter: 35.8mm
Motor Length: 52mm
Shaft Diameter: 3.175mm
Shaft Length: 13.9mm
Mounting Screw Threads: 6 x M3
Mounting Screw Centers: 25.2mm
Weight: 157g

Specs:
Type: Turnigy TrackStar Stock 540 Sensored Brushless Motor
Scale: 1/10th (stock class)
Poles: 2
Turns: 21.5
KV: 2350KV
Sensored: Yes (Standard 6-pin lead)
Sensor Lead: Included
Input Voltage: 7.4~11.1V (2~3S)
Max Current: 28A
Max Watts: 100
Resistance: 0.0558 ODM
Motor Diameter: 35.8mm
Motor Length: 52mm
Shaft Diameter: 3.175mm
Shaft Length: 13.9mm
Mounting Screw Threads: 6 x M3
Mounting Screw Centers: 25.2mm
Weight: 157g

Features:
• Sensor-based for excellent torque and smoothness even at slow speeds
• Adjustable timing for fine-tuning and CW or CCW rotation
• CNC machined T6 aluminum motor case for excellent heat dissipation
• High purity copper windings and 0.2mm ultra-thin silicon steel stator
• Powerful sintered neodymium magnets and high-speed oversize bearings
• Removable/replaceable Rotor
• Water and dustproof

Specs:
Type: Turnigy TrackStar 4268-2000KV High-Torque Sensored Brushless Motor
Scale: 1/8th
Poles: 4 (12 slots)
KV: 2000KV
Max RPM: 50,000
Sensored: Yes (Standard 6-pin lead)
Sensor Lead: Included
Max Voltage: 14.8V (4S)
Max Current: 97A
Resistance: 0.0099 ODM
Motor Diameter: 40.8mm
Motor Length: 68.7mm
Shaft Diameter: 5mm
Shaft Length: 19.5mm
Mounting Screw Threads: 4 x M3 or 4 x M4
Mounting Screw Centers: 25.2mm
Weight: 320g

Features:
• Sensor-based for excellent torque and smoothness even at slow speeds
• Adjustable timing for fine-tuning and CW or CCW rotation
• CNC machined T6 aluminum motor case for excellent heat dissipation
• High purity copper windings and 0.2mm ultra-thin silicon steel stator
• Powerful sintered neodymium magnets and high-speed oversize bearings
• Removable/replaceable Rotor
• Water and dustproof

Specs:
Type: Turnigy TrackStar 4268-2800KV High-Torque Sensored Brushless Motor
Scale: 1/8th
Poles: 4 (12 slots)
KV: 2800KV
Max RPM: 50,000
Sensored: Yes (Standard 6-pin lead)
Sensor Lead: Included
Max Voltage: 14.8V (4S)
Max Current: 130A
Resistance: 0.0056 ODM
Motor Diameter: 40.8mm
Motor Length: 68.7mm
Shaft Diameter: 5mm
Shaft Length: 19.5mm
Mounting Screw Threads: 4 x M3 or 4 x M4
Mounting Screw Centers: 25.2mm
Weight: 320g

Features:
• Sensor-based for excellent torque and smoothness even at slow speeds
• Adjustable timing for fine-tuning and CW or CCW rotation
• CNC machined T6 aluminum motor case for excellent heat dissipation
• High purity copper windings and 0.2mm ultra-thin silicon steel stator
• Powerful sintered neodymium magnets and high-speed oversize bearings
• Removable/replaceable Rotor
• Water and dustproof

Specs:
Type: Turnigy TrackStar 4268-1900KV High-Torque Sensored Brushless Motor
Scale: 1/8th
Poles: 4 (12 slots)
KV: 1900KV
Max RPM: 50,000
Sensored: Yes (Standard 6-pin lead)
Sensor Lead: Included
Input Voltage: 7.4~22.2V (2~6S)
Max Current: 90A
Resistance: 0.0114 ODM
Motor Diameter: 40.8mm
Motor Length: 68.7mm
Shaft Diameter: 5mm
Shaft Length: 19.5mm
Mounting Screw Threads: 4 x M3 or 4 x M4
Mounting Screw Centers: 25.2mm
Weight: 320g

Features:
• Sensor-based for excellent torque and smoothness even at slow speeds
• Adjustable timing for fine-tuning and CW or CCW rotation
• CNC machined T6 aluminum motor case for excellent heat dissipation
• High purity copper windings and 0.2mm ultra-thin silicon steel stator
• Powerful sintered neodymium magnets and high-speed oversize bearings
• Removable/replaceable Rotor
• Water and dustproof

Specs:
Type: Turnigy TrackStar 4268-2200KV High-Torque Sensored Brushless Motor
Scale: 1/8th
Poles: 4 (12 slots)
KV: 2200KV
Max RPM: 50,000
Sensored: Yes (Standard 6-pin lead)
Sensor Lead: Included
Input Voltage: 7.4~14.8V (2~4S)
Max Current: 112A
Resistance: 0.0085 ODM
Motor Diameter: 40.8mm
Motor Length: 68.7mm
Shaft Diameter: 5mm
Shaft Length: 19.5mm
Mounting Screw Threads: 4 x M3 or 4 x M4
Mounting Screw Centers: 25.2mm
Weight: 320g