AC/DC

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP9 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 11~18V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP9 can charge four batteries of the same type and voltage at the same time making it perfect if you use lots of the same batteries to power your models. The large easy-to-read LCD screen shows the information for the battery pack whilst they are being set up, then shows real-time data when the packs are being charged. The charging outputs can simultaneously charge from 0.1~5A up to a max of 50W per port and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP9 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 11~18V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP9 can charge four batteries of the same type and voltage at the same time making it perfect if you use lots of the same batteries to power your models. The large easy-to-read LCD screen shows the information for the battery packs whilst they are being set up, then shows real-time data when the packs are being charged. The charging outputs can simultaneously charge from 0.1~5A up to a max of 50W per port and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP9 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 11~18V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP9 can charge four batteries of the same type and voltage at the same time making it perfect if you use lots of the same batteries to power your models. The large easy-to-read LCD screen shows the information for the battery packs whilst they are being set up, then shows real-time data when the packs are being charged. The charging outputs can simultaneously charge from 0.1~5A up to a max of 50W per port and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP9 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 11~18V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP9 can charge four batteries of the same type and voltage at the same time making it perfect if you use lots of the same batteries to power your models. The large easy-to-read LCD screen shows the information for the battery packs whilst they are being set up, then shows real-time data when the packs are being charged. The charging outputs can simultaneously charge from 0.1~5A up to a max of 50W per port and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The ToolkitRC M450 is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V), and can charge 2~4S battery packs at up to 5A, and a maximum of 50W.

Setting the type of battery, and the charge current is a simple affair using a single button (short press, and long press actions), and the intuitive, easy-to-read, wide angle, backlit, IPS 1.54" 240x240 pixel LCD screen. The 32-bit ARM processor provides high-precision charging management and gives a balance charge accuracy of <0.005V. Ports include an XT60 charging port, a 2~4S JST-XH balance port, and the standard AC input port.

The ToolkitRC M450 is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V), and can charge 2~4S battery packs at up to 5A, and a maximum of 50W.

Setting the type of battery, and the charge current is a simple affair using a single button (short press, and long press actions), and the intuitive, easy-to-read, wide angle, backlit, IPS 1.54" 240x240 pixel LCD screen. The 32-bit ARM processor provides high-precision charging management and gives a balance charge accuracy of <0.005V. Ports include an XT60 charging port, a 2~4S JST-XH balance port, and the standard AC input port.

The ToolkitRC M450 is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V), can charge 2~4S battery packs at up to 5A, and a maximum of 50W.

Setting the type of battery, and the charge current is a simple affair using a single button (short press, and long press actions), and the intuitive, easy-to-read, wide angle, backlit, IPS 1.54" 240x240 pixel LCD screen. The 32-bit ARM processor provides high-precision charging management and gives a balance charge accuracy of <0.005V. Ports include an XT60 charging port, a 2~4S JST-XH balance port, and the standard AC input port.

The ToolkitRC M450 is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V), can charge 2~4S battery packs at up to 5A, and a maximum of 50W.

Setting the type of battery, and the charge current is a simple affair using a single button (short press, and long press actions), and the intuitive, easy-to-read, wide angle, backlit, IPS 1.54" 240x240 pixel LCD screen. The 32-bit ARM processor provides high-precision charging management and gives a balance charge accuracy of <0.005V. Ports include an XT60 charging port, a 2~4S JST-XH balance port, and the standard AC input port.

ToolkitRC U3 Compact 2~3S USB Type C 25W 2A balance charger is an ultra-compact palm-size balance charger, that plugs into your favorite USB mains power supply. No fancy programming with this baby, just plug it into your USB adapter, connect your 2~3S LiPo battery balance lead, switch it on, and instantly it will start a balanced charge. The charge rate is set at 2A and the LED light will glow red when charging, then change to green when the charge is complete.

Features:
• A compact, fixed-rate charger for 2~3S LiPo batteries
• Utilizes any popular USB Type-C power adapter
• The perfect companion for charging items while traveling
• Simple LED light system denotes charging and standby

B3AC Компактное зарядное устройство HobbyKing® ™ представляет собой простой и компактный LiPoly balanace зарядное устройство для 2 батарей 3s ~. Он имеет встроенный в JST-XH баланс подключаемых портов и 3 светодиода для индикации состояния заряда.

HobbyKing® ™ B3AC делает идеальным размером зарядное устройство карман, чтобы держать в поле поле.

Технические характеристики:
Входное напряжение: 110В или 240В A / C (50 / 60Гц)
Cell Count: 2 ~ 3s
Тип батареи: LiPoly
Выходной ток: 3 х 800 мА
Размеры: 95x55x32mm

Зарядка дома на 100 / 240V или в поле на 12v. B6-AC обрабатывает как!
IMAX B6-AC V2 является твердым зарядное устройство рок тот способен заряжать, балансировать и разрядить Lion, LiPo, LiFe (A123), NiCd и NiMH аккумуляторы.
Это не подделка. Это настоящий IMAX B6. Наша аварийность / отдача от этого зарядного устройства чрезвычайно низки.

Особенности:
• AC 100 ~ 240В или вход 12V DC
• Микропроцессорный контроль
• Дельта-пик чувствительности
• Балансировка Индивидуальные ячейки
• Литий-ионный, LiPo и LiFe способны
• Ni-Cd и NiMH способны
• Функция магазина, обеспечивает безопасное хранение тока
• функция ограничения времени
• Хранение данных (магазин до 5 пакетов в памяти)
• Контроль входного напряжения. (Защищает батареи автомобиля на поле)
• Батарея обкатки и езда на велосипеде

Технические характеристики:
Входное напряжение: 11 ~ 18V
Цепь питания: Max Charge: 50W / Max Разгрузка: 5W
Зарядный ток Диапазон: 0.1 ~ 6.0A
Ток разряда диапазон: 0.1 ~ 2.0A
Ni-MH / NiCd клетки: 1 ~ 15
Li-Ion / Poly клетки: 1 ~ 6
Pb напряжение батареи: 2 ~ 20V
Вес: 632g
Размеры: 135x144x36mm

Это зарядное устройство имеет JST-XH баланс плагин, что делает его совместимым с Zippy, HXT, TURNIGY и любой пакет с адаптером JST.