Распродажа

Подача питания на совместимые электрические элементы с 4 мм HXT к гнезду преобразователя постоянного тока. Преобразователь DC Jack имеет два разъема 2 мм штекером (положительные центры) и идеально подходит для питания зарядных устройств или аналогичных электрических элементов.

Технические характеристики:
Длина: 210мм
DC Jack: 2 мм
Разъем для кабеля батареи: 4мм HXT

Большинство стандартных батарей 7S полимера лития имеют два баланса порта, баланса свинца 4S и 3S (всего 7S). Это затрудняет для зарядки с большинством стандартных зарядных устройств, которые только имеют один порт баланса.

С помощью этого супер полезный адаптер вы можете легко зарядить аккумулятор 7S с любым стандартным 8 ~ 10S, способного зарядного баланса, который принимает JST-XH баланс пробки. Этот адаптер принимает 4S и 3S отдельные пробки из рюкзака, и объединяет их к одному 7S баланса вилки, который способен подключаться к большинству стандартных 8 ~ 10S, способных зарядных устройств.

Технические характеристики:
Входной сигнал: 1 х 4S и 1 х 3S JST-XH баланс плагин
Выход: 7S JST-XH баланс плагин
Длина: 100 мм

HXT 4 мм, чтобы привести адаптер T-коннектор батареи (2pc)

Этот адаптер будет конвертировать HXT 4мм оборудованный аккумуляторную батарею к T-Connector для использования с T-Connector оборудованного ESC или Charge свинца.

Spec:
Вес: 7g (каждый)

Используйте этот адаптер для преобразования XT-60 Charge провод для зарядки батареи JST оборудованы.

This simple and effective charge lead comes pre-soldered with standard 4mm bullet connectors at the charger end and has stepped, bullet connectors at the battery end allowing you to charge hard case packs that utilise 4mm and 5mm connectors. 

This adapter will convert an HXT 5.5mm bullet equipped battery to an XT90 for use with an XT90 equipped ESC or an XT90 Charge lead.

This adapter will convert an XT90 equipped battery to an HXT 5.5mm bullet for use with an HXT 5.5mm bullet equipped ESC or an HXT 5.5mm bullet Charge lead.

XT30U Silicone Charge Lead with 4mm Banana Plugs.

An excellent, low resistance, flexible silicone charge lead with standard 4mm banana plugs on one end and a set of XT150/AS150 on the other. The Amass XT150/AS150 is a 7mm anti-spark connector rated at up to 150amps, and the 4mm banana plugs suits most chargers on the market today.

Specs:
Battery Connector: XT150/AS150 (7mm)
Charger Connection: 4mm Banana Plug
Wire Diameter: 14AWG
Wire: Tinned copper
Wire Insulation: Silicone rubber
Length: 300mm
Weight: 37.3g

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with TRA connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC3 connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC5 connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with TR connectors for the main charging leads, a pair of 4mm banana plugs to connect to the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC3 connectors for the main charging leads, a pair of 4mm banana plugs to connect to the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

The ToolkitRC SC100 adapter cable is used for powering low-wattage battery chargers or other devices with an XT60 input connector from a USB-C power supply at up to 100W.

Specs:
Type: ToolkitRC SC100 XT60~USB-C Protocol Cable
Input: USB-C 5.0~20V@PD2.0/PD3.0/QC2.0
Output Voltage: 5~20V max
Output Current: 5A max
Output Connector: XT60
Length: 50cm
Weight: 35g