Все самолеты

Эта версия популярного самолета Piper J-3 Cub выполнена в новой поразительной швейцарской цветовой схеме, которая является обязательной для всех масштабных пилотов. В этой цветовой схеме используется гораздо меньше краски, что позволяет немного снизить вес, что еще больше уменьшает и без того низкую нагрузку на крыло. Внимание к деталям делает эту модель чрезвычайно реалистичной, и она поставляется с хорошим, щедрым размахом крыла 1400мм. Как и все Cub'ы с большим размахом крыла и стабильными летными характеристиками, он очень прост в управлении, идеально подходит как для пилотов с небольшим налетом, так и для экспертов. Swiss Cub также имеет новое цельнометаллическое шасси, которое практически не подвержено разрушению, оно выдержит самые жесткие посадки. Дальнейшее снижение веса было достигнуто за счет удаления металлических тросов крепления хвоста, они были заменены на выглядящие в масштабе, легко устанавливаемые, легкие эластичные белые амортизаторы.

Avios Albatross HU-16 - красивая двухмоторная летающая лодка с большим однокорпусным корпусом и поплавками на крыле, вся нижняя часть передней части корпуса усилена пластиком. Это позволяет ему с радостью выдерживать все удары и удары при использовании аэродрома с травой, но, как упоминалось ранее, он действительно вступает в свои права при работе с вашего любимого озера или водного пути. Руление и выстраивание в линию для взлета стало намного проще с помощью водяного руля направления и поставляемых Aerostar прямого / обратного водонепроницаемого ESC. Встроенные закрылки обеспечивают большую подъемную силу, а также делают посадку и взлет намного проще и чрезвычайно масштабными.

The Durafly Gloster Gladiator is manufactured in strong EPO foam, to the usual high standards you have come to expect from this range of RC airplanes. As with most other Durafly models, it comes "Plug N Fly". This means it is supplied with an easy-to-assemble airframe, powerful pre-installed 3719-770KV brushless motor, Aerostar 40A ESC, and 4 pre-installed 9g digital servos. A vinyl decal sheet is included, these will need to be applied during the building process, this gives you the choice of using the silver finish as a base for creating your own color scheme. Once the model is assembled, all you require is your choice of 4ch or more receiver and a 2200mAh 4S (14.8V) LiPo battery.

While Avios are known the world over for their fantastic semi-scale models of powered airplanes, particularly waterplanes, their experience and dedication to designing and producing great flying models means they are perfectly placed to produce other types as well. The Avios Kobuz is a large, aerobatic, sport-scale model with outstanding flight characteristics of the SZD-21 Kobuz single-seat aerobatic glider, designed and built in Poland.

This flapped, 2200mm wingspan model features clean and aesthetic lines, it will fly fast or slow, has an incredible climb rate, and is very aerobatic with good speed retention in the glide. All these things are wrapped up in one big, beautiful package, which is then finished in a stunning hi-viz Swiss color scheme. The color scheme design is quite different top and bottom for great orientation when flying high or at a distance. One feature of the Kobuz is the very large canopy with instrument panel detail, which offers easy access to the battery and RC compartment. There is also plenty of room in the canopy if you wish to convert the Kobuz to FPV.

Unleash the power and prestige of the limited edition Black Viper 64. This exclusive 6S EDF jet combines stunning looks with explosive speed and beginner-friendly stability.

Strike with style! The H-King Viper 64 EDF Jet has been reborn in a sinister new scheme for a limited edition release. Dressed in a sleek silver and black paint job with a menacing Snake Head logo, this jet is as fast as it looks. Powered by a robust 6S setup, it delivers a breathtaking turn of speed and a realistic turbine-like sound that guarantees to command attention at your flying field.

This striking version of the Durafly T-28 Trojan comes in a unique color scheme for the Naval Aviation Centennial (1911-2011) (US Navy). The Durafly T-28 is an impressive RC plane to fly and even has the ability to be upgraded for the extreme challenge of FPV flying.

Представляем наш EPP 3D MX2. Благодаря фантастический дизайн и оформление, это все из EPP 3D'er удовлетворит самые нетерпеливые 3D пилотов!

Это Фюзеляж кручение очень жесткий, но легкий с нагрузками пространства под длинной верхней люк для радио и системы питания. Крыло одна часть дело с участием EPP конструкция, представляющая собой очень точный симметричный профиль крыла с 2-х дополнительных лонжеронов, чтобы свести к минимуму гибкость и твист. Поверхности управления являются чем-то еще - лифт, руль направления и элероны имеют конструкцию 3 слоя (EPP-Depron-EPP), что делает для жестких поверхностей и не прогибается при экстремальных бросков! Привязать валков Привязать 'и реакция управления мгновенно.

Свет - еще жесткая - планера добавляет к одной большой летающей 3D 'пенистого'. Водопады, луни, плоские спины, прокатные круги эта модель имеет точность, чтобы выполнить эти и любые другие шаги, вы можете думать!

Сборка планера в быстром процессе 10-15 минут с помощью небольшого среднего CA. Радио и система питания макеты очень проста, длинный верхний люк делает для легкого доступа.

Это отличная модель для общего полета парка и хардкор 3D. Вам будет трудно разорвать эту модель, он будет принимать жесткие удары и просто держать отскакивая назад каждый раз!


Особенности:
• Прочный EPP материал, легкий и устойчивый краш
• Stiff EPP / Depron поверхности составного элемента управления
• Революционная конструкция добавляет к структурной целостности и жесткости планера
• Легкий обеспечивает оптимальную нагрузку крыла
• Отличная пилотажной производительность и 3D маневренности.
• Простая конструкция обеспечивает легкий доступ и монтаж оборудования
• Стенд из цветовая схема отлично подходит для ориентации


Технические характеристики:
Размах: 955mm
Длина: 945mm
Площадь крыла: 15.2dm2
Вес: 550г (без батареи)




Требуется:
Система радиосвязи 4 канала
2217 950-1100KV Бесщеточный скороход
30Amp ESC
3S 11.1V 1100-1300MAH Li-Po
10x4.7 / 11x4.7 пропеллер
4 х 9g сервоприводы

B-17 Flying Fortress остается одним из самых известных союзнических бомбардировщиков 2МВ. Хотя он служил в каждом театре войны, она была в Европейском театре операций (ЕТО) с известным 8-й военно-воздушных сил, в частности, что этот крепкий и хорошо вооруженный тяжелый бомбардировщик летел свой путь в учебники истории.

Полномасштабный планер ASW 28 - это планер стандартного класса с пятнадцатиметровым размахом, сделанный из современных композитных материалов, армированных волокном. Производитель ASW-28 - Alexander Schleicher GmbH & Co. Буква «W» означает, что он разработан влиятельным и плодовитым немецким дизайнером Герхардом Вайбелем. Серийное производство начато в 2000 году.

Our model captures the true spirit of the early WW1 Fokker Eindekker, It has an open framework structure built from quality balsa and hardwoods, a fiberglass cowl and plastic engine covers, a dummy rotary engine, and of course the machine gun. For ease of construction, all the parts are beautifully laser cut and are extremely accurate which will allow you to build the perfect model. To complete the contents of this superb kit are a pair of vintage aircraft wheels, pre-bent and drilled aluminum wing struts and U/C legs, carbon tube wing spars, and joiners plus a comprehensive hardware pack that includes rigging wire, nuts, and bolts, servo horns, rods, and connectors, etc.

After listening to customer feedback the Durafly team has designed this, stunningly painted, Red Edition Me-163 Komet. It is based on the plane that EK16 commander, Wolfgang Spate, flew on the first operational mission. After this flight the plane was returned to it's more traditional color scheme. As well as this stunning color the Durafly team has incorporated a wider tracked 'dolly' to improve ground handling during take-off. The Durafly Me-163 is in itself a truly a ground breaking model. Not only does this Komet feature a fully working scale 'dolly' style undercarriage, blistering performance and a high-quality finish, but it is designed out of the box to accept a model rocket engine! In its Plug and Fly (PnF) form, Durafly's 950mm (37.5") span Me-163 comes with all electronics pre-installed and ready to hook up to your choice of 6ch receiver. A minimal part count allows assembly to be completed in just a few steps. The molded EPO has a highly detailed surface finish externally, carbon reinforcement internally and features a color matched hard plastic belly skid. It also has good access to all electronics via the battery/canopy hatch, excellent cooling through out and of course a very authentic looking scheme. Quality is definitely the name of the game.

Welcome to the ultimate scale experience. The Avios Spitfire Mk5 has been built using super scale, a new modelling technique that allows for incredible detail. Featuring more artistry than the 1100mm Spitfire, the larger model has visible panel lines, exhaust, cannons, and scale split flaps with turn indicators for added realism.

This H-King version of the classic P-51D warbird is manufactured in a superbly finished EPO foam in an authentic blue and silver color scheme with all the decals pre-applied. This is the updated V2 version of this popular model and it now comes with a built-in 6 axis ORX flight stabilization system to make it even easier to fly. The stabilization system utilizes a 32bit MCU and a 6 axis digital gyro for ultra-fast control response, it can also be switched from beginner mode to expert mode.

Эта великолепная и превосходная летающая спортивная / масштабная модель с Avios KingTwin 1700 основана на небольшом твин-турбовинтовом двигателе и очень напоминает модель, используемую военными или гражданскими чартерными авиакомпаниями по всему миру. Упрощенная, но яркая цветовая схема отображает тип окраски, обычно применяемой на гражданских винтах.

KingTwin 1700 оснащен множеством интересных функций, включая светодиодные фонари, втягивание и раздельные заслонки. Силовой агрегат двух бесколлекторных бегунов Aerostar 3748-820KV с ESC Aerostar 40A был выбран командой Avios после тщательного тестирования. Эта комбинация двигателей, регуляторов скорости, вращающихся в противоположных направлениях стоек и батареи 4S LiPo оказалась оптимальной с точки зрения мощности и продолжительности работы.

H-King P-51 «Galloping Ghost» - первый в новой мини-серии от H-King, «Reno Aces», истребитель Второй мировой войны, одетый, чтобы произвести впечатление на воздушных гонках. P-51 «Galloping Ghost» с включенным в комплект поставки бесщеточным двигателем 3108-1070KV предлагает действительно быструю модель прямо из коробки со скоростью, приближающейся к 100 милям в час при использовании рекомендованного 4S LiPo 2200 мАч. Однако, если вы опытный специалист и ищете скорость 100+ миль в час, то есть дополнительный бесщеточный двигатель 3108-1170KV «Pro». Это придаст вашему великолепному Reno Ace действительно баллистические характеристики на том же винте, ESC и батарее 4S для тех, кто может справиться с дополнительным крутящим моментом при запуске.

The H-King FG-1 Corsair "Lucky Gallon" is the third in the mini-series from H-King, the "Reno Aces", WW2 fighters dressed to impress at the air races. The FG-1 Corsair "Lucky Gallon" with the included stock 3108-1070KV brushless motor offers a really quick model straight out of the box with speeds approaching 100mph when using the recommended 2200mAh 4S LiPo. However, if you are an experienced hand and are looking for 100+ mph speeds then there is the optional drop-in fit 3108-1170KV 'Pro' brushless motor. This will give your great-looking Reno Ace really ballistic performance on the same prop, ESC, and 4S battery for those that can handle the extra rotational torque on launch.

Эта версия Як-11 - Red Reno Racer, это не полная цветовая схема, а в некоторой степени основана на Strega P-51 Reno Mustang. Как упоминалось выше, будучи гоночной версией, он снабжен трансмиссией, разработанной для чистой скорости. Используя батарею 6S LiPo, бесщеточный двигатель 5052-550KV с прилагаемым ESC 95A и пропеллером 16x6 даст Як-11 невероятную скорость до 125 миль в час. Это быстро, и увидеть, как модель такого внушительного размера делает быстрые повороты пилона рядом с землей, - это зрелище. Высший пилотаж - тоже мечта исполнить на Яке, крены очень осевые, а маневры по петле большие из-за обилия мощности. Единственным ограничением для фигур высшего пилотажа, которые он будет выполнять, являются ваши летные навыки.

The incredible Avios C-130 is back with two new hi-viz, vibrant, and lighter in weight color schemes, plus a host of other improvements. The improvements on the V2 are mainly aimed at reducing weight to improve the slow-flight handling characteristics. Like the original version, the C-130 V2 is completed to the highest level of scale detail, has a 1600mm wingspan, and measures over a meter in length.

This great-looking and superb flying Avios KingTwin 1700 sports/scale model is based on a small twin-turboprop and is very reminiscent of the type used by the military or civilian charter airlines around the world. With so many fantastic color schemes available for this type of airplane, Avios have decided to produce a plain white version. This plain white finish provides the perfect blank canvas for you to produce a completely unique, and bespoke color scheme of your own choice.

This H-King version of this very impressive F-16 Fighting Falcon is manufactured in EPO foam and is beautifully finished in an authentic USAF color scheme with the decals pre-applied at the factory. The H-King F-16 has outstanding flight characteristics in its own right, it flies like it is on rails, but the pre-installed ORX 6-axis gyro takes this to another level. Pilots of all levels of experience will benefit from using the intermediate gyro setting, this really does improve stability and smoothes out the flight, especially in windy conditions. For beginners and low hours pilots, the flight stabilization system makes it even easier to fly. It utilizes a 32bit MCU for ultra-fast control response and has 3 settings, gyro off, gyro on, and training mode. In the training mode, the gyro gives full stability and also limits the amount of roll and pitch that can be used. In gyro-on mode, this gives slightly less aided stability and does not limit the roll or pitch that can be used, perfect for smooth, jet-style aerobatics. In gyro off mode, it is exactly that, no gyro at all.

This H-King version of this very impressive F-18 Super Hornet is manufactured in EPO foam and is beautifully finished in an authentic USAF color scheme with the decals pre-applied at the factory. The H-King F-18 has outstanding flight characteristics in its own right, it flies like it is on rails, but the pre-installed ORX 6-axis gyro takes this to another level. Pilots of all levels of experience will benefit from using the intermediate gyro setting, this really does improve stability and smoothes out the flight, especially in windy conditions. For beginners and low hours pilots, the flight stabilization system makes it even easier to fly. It utilizes a 32bit MCU for ultra-fast control response and has 3 settings, gyro off, gyro on, and training mode. In the training mode, the gyro gives full stability and also limits the amount of roll and pitch that can be used. In gyro-on mode, this gives slightly less aided stability and does not limit the roll or pitch that can be used, perfect for smooth, jet-style aerobatics. In gyro off mode, it is exactly that, no gyro at all.

The Durafly Me-163B has been designed for pilots with some experience, it benefits from an incredible flight performance, great stability throughout its speed range, and like the real thing, it is incredibly fast. Aerobatics including huge loops, vertical rolls out of sight, and very fast low passes are easily achievable, yet slow it down and it's very stable, with no hint of a stall. Using the recommended 2200mah 30-65C 4S LiPo battery and the supplied 6x4 prop, you can expect flight times well beyond 5 minutes and an abundance of power. If you love speed and very fast models, then this one is for you, the Komet Me-163 is ballistic, with speeds approaching 100mph.

This beautiful model of a North American T-28 Trojan USAF Military Trainer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

This beautiful model of a Grumman F8F Rare Bear Reno Racer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

The 550mm XK A300 Beechcraft D17S is manufactured to very high standards in tough EPP foam. It is supplied ready to fly (RTF) complete with a Mode 1-2 switchable 2.4GHz 4 channel RC system, a switchable 6-axis gyro, a powerful, efficient brushless motor with ESC, 2 servos, on-board LED lights, 7.4V 600mAh battery, and a USB charging cable. Assembly is very easy and straightforward, all the necessary parts and tools are supplied to get your Staggerwing ready to fly in less than an hour, you just need to supply 6 x "AA" batteries for the transmitter.

The 550mm XK A300 Beechcraft D17S is manufactured to very high standards in tough EPP foam. It is supplied ready to fly (RTF) complete with a Mode 1-2 switchable 2.4GHz 4 channel RC system, a switchable 6-axis gyro, a powerful, efficient brushless motor with ESC, 2 servos, on-board LED lights, 7.4V 600mAh battery, and a USB charging cable. Assembly is very easy and straightforward, all the necessary parts and tools are supplied to get your Staggerwing ready to fly in less than an hour, you just need to supply 6 x "AA" batteries for the transmitter.

This fantastic looking XFly 80mm EDF jet is a detailed scale model of the French Air Force Alpha Jet, it is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, removable gun pod, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in a French Air Force color scheme.

This fantastic-looking XFly 80mm EDF jet is a detailed scale model of the Dassault/Dornier Alpha Jet, this version is in the color scheme of the famous Patrouille de France aerobatic team. It is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in the classic Patrouille de France color scheme.

The XFLY T-7A Red Hawk 750mm EDF jet is an easy-to-fly, versatile EDF trainer that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S compatible power system includes a 12-bladed 64mm fan unit that delivers ample power for an abundance of thrust, speed, and an incredible turbine-like sound. The full-size Boeing-Saab T-7 Red Hawk (originally known as the Boeing T-X) is an American/Swedish advanced jet trainer that was designed to replace the popular Northrop T-38 Talon. The design is smaller, but very similar to the McDonnell Douglas F/A-18 with its large leading edge root extensions, and V-shaped twin vertical tail design. These design features give the full-size incredible maneuverability and excellent low-speed handling, these attributes carry over extremely well to the XFLY model of the T-7A Red Hawk.

This fantastic-looking XFly 80mm EDF jet is a detailed scale model of a US Airforce T-7A Red Hawk advanced trainer. It is packed full of scale details including molded-in panel lines, simulated antenna, pitot tube, a crystal clear canopy with cockpit detail, missiles, drop tanks, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, full-flying horizontal stabs, and operational flaps.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

The XFLY A-10 Thunderbolt II is a small, scale twin-EDF model of the iconic US Air Force close attack fighter that is perfect for flying in smaller areas such as local parks, sports fields, etc. The full-size A-10 Thunderbolt affectionately known as the "Warthog", was mainly used for close air support for ground troops and armored vehicles. It was highly maneuverable due to its large ailerons, was very tough and durable, could take a lot of punishment, and it "pièces de résistance" was the Gatling gun mounted in the nose. The actual airframe was designed around this high-powered 30mm gun, it was one of the most powerful guns ever fitted to a plane and could fire up to an amazing 4,200 rounds per minute.

The Dancing Wings Hobby Fokker Eindecker III is a scale model of the famous World War 1 monoplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, a dummy engine, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.