Самолет

Telemicro 520мм - Замена Spinner

Этот маленький набор занимает около 4 ч, чтобы построить и будет удовлетворять дроссельную Jocky во всех нас!

FlyCat поставляется с 56 мм EDF и вам потребуется 25A ESC & 4800kv Inrunner.

Этот самолет очень быстро, (более 100 миль в час!), Однако по-прежнему стабильным при медленном полете.

Спекуляция
Размах: 640mm
Длина: 800мм
Вес: 290г
BESC: 25A (не входит в комплект )
Двигатель: 4800kv 20-30 размер Inrunner (не входит в комплект )
LiPoly: 1300mAh 11.1V 20C (не входит в комплект )

Необходимые.
Двигатель и ESC
3 х 9g Servo
5 или 10мин эпоксидной смолы (Araldite)
1 х Servo Y свинца
1 х Servo Удлинитель свинца
12AWG кремния провод (20см Для двигателя к ESC)
Батарея 1300mAh 11.1V 20C Lipo
Ваш собственный приемник и передатчик

Наш отчет полета.

Комплект подходит вместе хорошо, Подшлифовка передние и задние кромки, необходимые для удаления лишних пены. Мы решили не укреплять крыло с CF трубки, который в штрафной оказаться проблемой, даже при полной скорости высокой G поворотов.

Мы решили смонтировать BESC будучи в области батареи, в случае необходимости батареи, чтобы переместить вперед, чтобы отрегулировать CofG, однако это не было необходимо.

EDF был установлен на палочке горе. Стик монтаж был сокращен, с дополнительной части, используемой для повышения EDF от палки, чтобы очистить EDF саван. 2 болта держал блок вентилятора к палке, один до и один после лопастей вентилятора.

Первый полет.

Мы держали CofG 9.5cm от вершины крыльев передней кромки. FlyCat была рука запущена на 3/4 дроссельной заслонки, ускорения быстро. К нашему удивлению, не требовалось подрезка.

FlyCat чрезвычайно быстрый набор для того чтобы летать, и требуется много лифта в поворотах. Мы предлагаем поставить лифт на максимум бросков. Это требует огромных количеств лифта во время поворотов!

В целом отличный самолет, который летит ровно, даже в ветреные дни.

Мы предлагаем хороший пакет Lipo, так как эта маленькая грелка будет жевать через 1500mAh всего за 5 минут. Мы использовали 3S1P пакет ZIPPY-R 1800mAh 22C около 8 минут полета. По сравнению с ZIPPY-Q пакет, который принес нам короткий около 7 минут.

Durafly® ™ Micro серии - Замена двигателя Маунт

Готовы ли вы быть Красный Барон вашего местного парка? Ну с фантастическим фон Стик вы можете быть летающий туз в течение нескольких минут.

Большой медленный дизайн палку, то фон Стик было сделано, чтобы быть супер-легкий, летать где угодно модель, с мощным редукторный двигатель работает от батареи 1S 3.7V 400mAh LiPoly.

Поставляется со своим собственным 2.4Ghz радио для помех свободного полета, легко собрать и закончил в поразительном Red Baron отделкой, с Von Стик вы будете делать дайвинг атаки и обстреливая работает в самое короткое время.

Легко летать с его основным рулевым и управления лифтами системы и очень снисходительно для начинающего пилота. На самом деле, фон Стик делает для идеальной первой модели для любого молодого человека или даже для опытного пилота, который ищет полностью потеху полетов самолетов, которые могут быть выброшены в местном парке, без суеты.

Особенности:
• Система радиосвязи 2.4GH
• Легкий вес
• Простота сборки
• Rudder / модель Лифт
• Идеально подходит для начинающих
• Красивая отделка смелый "Красный Барон"

Технические характеристики:
Размах: 52см
Длина: 38см
RC система: 2.4Ghz
Пропеллер: 6050 (slowfly)
Вес: 75г
Батарея Требуемое: 1S 3.7V 350-400mAh LiPoly
Расстояние управления: 150 м
Режим: 2

This H-King version of this very impressive F-16 Fighting Falcon is manufactured in EPO foam and is beautifully finished in an authentic USAF color scheme with the decals pre-applied at the factory. The H-King F-16 has outstanding flight characteristics in its own right, it flies like it is on rails, but the pre-installed ORX 6-axis gyro takes this to another level. Pilots of all levels of experience will benefit from using the intermediate gyro setting, this really does improve stability and smoothes out the flight, especially in windy conditions. For beginners and low hours pilots, the flight stabilization system makes it even easier to fly. It utilizes a 32bit MCU for ultra-fast control response and has 3 settings, gyro off, gyro on, and training mode. In the training mode, the gyro gives full stability and also limits the amount of roll and pitch that can be used. In gyro-on mode, this gives slightly less aided stability and does not limit the roll or pitch that can be used, perfect for smooth, jet-style aerobatics. In gyro off mode, it is exactly that, no gyro at all.

This beautiful model of a North American T-28 Trojan USAF Military Trainer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

This beautiful model of a Grumman F8F Rare Bear Reno Racer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

Do you feel the need for speed? Then this great-looking, extremely fast Rare Bear Reno Racer from Durafly is for you. It is supplied as a Plug-N-Fly model with minimal parts count, so assembly is quick and simple. There is no gluing required, just one screw holds the tail components in place, and 1 screw for the wing. Battery and radio access is via the large magnetically held canopy hatch, so radio installation and battery changes are very easy and straightforward.

The Dancing Wings Hobby Savage Bobber is a small, lightweight foam model that is quick and simple to build. The full-size Savage Bobber was devised by the Zlin Aviation Company. The Bobber as in the motorcycle world means that it is a stripped-down, customized version of an original. The Savage Bobber is a stripped-down, customized version of its older brother the Savage Classic. It is lighter, more maneuverable, and has a slightly narrower fuselage, and the absence of covering to the rear of the fuselage greatly improves the crosswind handling.

The model is reasonably straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction, tough plastic for the open framework rear fuselage, and lightweight balsa for the internal structure. Carbon strips are also included to reinforce and improve the stiffness of the structure. It builds up quickly into a good-looking, fun-to-fly lightweight (only 98g) sports plane that is perfect for indoor or park flying. This ARF kit is supplied with a powerful 1108-4000KV brushless motor, 5A brushless ESC, 5" propeller, and 4 x 2g servos.

The ZOHD Dart 250G is the small brother to the popular Dart XL, it is the world's first high-end sub 250g FPV flying wing. With increasing regulations affecting our hobby, it offers an FPV experience without as much hassle as the bigger, heavier models. You will still need to check your country's regulations, some do require you to register a model airplane with a camera on it even when below 250g. The little Dart 250G offers incredible lifting power despite its size, excellent handling, and portability, which makes it the ideal choice for FPV flying in a small package. Features include an optimized airfoil, dedicated equipment bay for flight controller and GPS, nose camera bay, super durable Teflon-covered underbelly, protected leading edge to the wing, and so much more.

The ZOHD Dart 250G is the small brother to the popular Dart XL, it is the world's first high-end sub 250g FPV flying wing. With increasing regulations affecting our hobby, it offers an FPV experience without as much hassle as the bigger, heavier models. You will still need to check your country's regulations, some do require you to register a model airplane with a camera on it even when below 250g. The little Dart 250G offers incredible lifting power despite its size, excellent handling, and portability, which makes it the ideal choice for FPV flying in a small package. Features include an optimized airfoil, dedicated equipment bay for flight controller and GPS, nose camera bay, super durable Teflon-covered underbelly, protected leading edge to the wing, and so much more.

Do you feel the need for speed? Then this great-looking, extremely fast Rare Bear Reno Racer from Durafly is for you. It is supplied as a Plug-N-Fly model with minimal parts count, so assembly is quick and simple. There is no gluing required, just one screw holds the tail components in place, and 1 screw for the wing. Battery and radio access is via the large magnetically held canopy hatch, so radio installation and battery changes are very easy and straightforward.

This H-King version of this very impressive F-18 Super Hornet is manufactured in EPO foam and is beautifully finished in an authentic USAF color scheme with the decals pre-applied at the factory. The H-King F-18 has outstanding flight characteristics in its own right, it flies like it is on rails, but the pre-installed ORX 6-axis gyro takes this to another level. Pilots of all levels of experience will benefit from using the intermediate gyro setting, this really does improve stability and smoothes out the flight, especially in windy conditions. For beginners and low hours pilots, the flight stabilization system makes it even easier to fly. It utilizes a 32bit MCU for ultra-fast control response and has 3 settings, gyro off, gyro on, and training mode. In the training mode, the gyro gives full stability and also limits the amount of roll and pitch that can be used. In gyro-on mode, this gives slightly less aided stability and does not limit the roll or pitch that can be used, perfect for smooth, jet-style aerobatics. In gyro off mode, it is exactly that, no gyro at all.

The 550mm XK A300 Beechcraft D17S is manufactured to very high standards in tough EPP foam. It is supplied ready to fly (RTF) complete with a Mode 1-2 switchable 2.4GHz 4 channel RC system, a switchable 6-axis gyro, a powerful, efficient brushless motor with ESC, 2 servos, on-board LED lights, 7.4V 600mAh battery, and a USB charging cable. Assembly is very easy and straightforward, all the necessary parts and tools are supplied to get your Staggerwing ready to fly in less than an hour, you just need to supply 6 x "AA" batteries for the transmitter.

The 550mm XK A300 Beechcraft D17S is manufactured to very high standards in tough EPP foam. It is supplied ready to fly (RTF) complete with a Mode 1-2 switchable 2.4GHz 4 channel RC system, a switchable 6-axis gyro, a powerful, efficient brushless motor with ESC, 2 servos, on-board LED lights, 7.4V 600mAh battery, and a USB charging cable. Assembly is very easy and straightforward, all the necessary parts and tools are supplied to get your Staggerwing ready to fly in less than an hour, you just need to supply 6 x "AA" batteries for the transmitter.