Самолет

Представляем наш EPP 3D MX2. Благодаря фантастический дизайн и оформление, это все из EPP 3D'er удовлетворит самые нетерпеливые 3D пилотов!

Это Фюзеляж кручение очень жесткий, но легкий с нагрузками пространства под длинной верхней люк для радио и системы питания. Крыло одна часть дело с участием EPP конструкция, представляющая собой очень точный симметричный профиль крыла с 2-х дополнительных лонжеронов, чтобы свести к минимуму гибкость и твист. Поверхности управления являются чем-то еще - лифт, руль направления и элероны имеют конструкцию 3 слоя (EPP-Depron-EPP), что делает для жестких поверхностей и не прогибается при экстремальных бросков! Привязать валков Привязать 'и реакция управления мгновенно.

Свет - еще жесткая - планера добавляет к одной большой летающей 3D 'пенистого'. Водопады, луни, плоские спины, прокатные круги эта модель имеет точность, чтобы выполнить эти и любые другие шаги, вы можете думать!

Сборка планера в быстром процессе 10-15 минут с помощью небольшого среднего CA. Радио и система питания макеты очень проста, длинный верхний люк делает для легкого доступа.

Это отличная модель для общего полета парка и хардкор 3D. Вам будет трудно разорвать эту модель, он будет принимать жесткие удары и просто держать отскакивая назад каждый раз!


Особенности:
• Прочный EPP материал, легкий и устойчивый краш
• Stiff EPP / Depron поверхности составного элемента управления
• Революционная конструкция добавляет к структурной целостности и жесткости планера
• Легкий обеспечивает оптимальную нагрузку крыла
• Отличная пилотажной производительность и 3D маневренности.
• Простая конструкция обеспечивает легкий доступ и монтаж оборудования
• Стенд из цветовая схема отлично подходит для ориентации


Технические характеристики:
Размах: 955mm
Длина: 945mm
Площадь крыла: 15.2dm2
Вес: 550г (без батареи)




Требуется:
Система радиосвязи 4 канала
2217 950-1100KV Бесщеточный скороход
30Amp ESC
3S 11.1V 1100-1300MAH Li-Po
10x4.7 / 11x4.7 пропеллер
4 х 9g сервоприводы

This H-King version of the classic P-51D warbird is manufactured in a superbly finished EPO foam in an authentic blue and silver color scheme with all the decals pre-applied. This is the updated V2 version of this popular model and it now comes with a built-in 6 axis ORX flight stabilization system to make it even easier to fly. The stabilization system utilizes a 32bit MCU and a 6 axis digital gyro for ultra-fast control response, it can also be switched from beginner mode to expert mode.

H-King P-51 «Galloping Ghost» - первый в новой мини-серии от H-King, «Reno Aces», истребитель Второй мировой войны, одетый, чтобы произвести впечатление на воздушных гонках. P-51 «Galloping Ghost» с включенным в комплект поставки бесщеточным двигателем 3108-1070KV предлагает действительно быструю модель прямо из коробки со скоростью, приближающейся к 100 милям в час при использовании рекомендованного 4S LiPo 2200 мАч. Однако, если вы опытный специалист и ищете скорость 100+ миль в час, то есть дополнительный бесщеточный двигатель 3108-1170KV «Pro». Это придаст вашему великолепному Reno Ace действительно баллистические характеристики на том же винте, ESC и батарее 4S для тех, кто может справиться с дополнительным крутящим моментом при запуске.

The H-King FG-1 Corsair "Lucky Gallon" is the third in the mini-series from H-King, the "Reno Aces", WW2 fighters dressed to impress at the air races. The FG-1 Corsair "Lucky Gallon" with the included stock 3108-1070KV brushless motor offers a really quick model straight out of the box with speeds approaching 100mph when using the recommended 2200mAh 4S LiPo. However, if you are an experienced hand and are looking for 100+ mph speeds then there is the optional drop-in fit 3108-1170KV 'Pro' brushless motor. This will give your great-looking Reno Ace really ballistic performance on the same prop, ESC, and 4S battery for those that can handle the extra rotational torque on launch.

This H-King version of this very impressive F-16 Fighting Falcon is manufactured in EPO foam and is beautifully finished in an authentic USAF color scheme with the decals pre-applied at the factory. The H-King F-16 has outstanding flight characteristics in its own right, it flies like it is on rails, but the pre-installed ORX 6-axis gyro takes this to another level. Pilots of all levels of experience will benefit from using the intermediate gyro setting, this really does improve stability and smoothes out the flight, especially in windy conditions. For beginners and low hours pilots, the flight stabilization system makes it even easier to fly. It utilizes a 32bit MCU for ultra-fast control response and has 3 settings, gyro off, gyro on, and training mode. In the training mode, the gyro gives full stability and also limits the amount of roll and pitch that can be used. In gyro-on mode, this gives slightly less aided stability and does not limit the roll or pitch that can be used, perfect for smooth, jet-style aerobatics. In gyro off mode, it is exactly that, no gyro at all.

This beautiful model of a North American T-28 Trojan USAF Military Trainer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

Do you feel the need for speed? Then this great-looking, extremely fast Rare Bear Reno Racer from Durafly is for you. It is supplied as a Plug-N-Fly model with minimal parts count, so assembly is quick and simple. There is no gluing required, just one screw holds the tail components in place, and 1 screw for the wing. Battery and radio access is via the large magnetically held canopy hatch, so radio installation and battery changes are very easy and straightforward.

This beautiful model of a Grumman F8F Rare Bear Reno Racer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

This fantastic looking XFly 80mm EDF jet is a detailed scale model of the French Air Force Alpha Jet, it is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, removable gun pod, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in a French Air Force color scheme.

This fantastic-looking XFly 80mm EDF jet is a detailed scale model of the Dassault/Dornier Alpha Jet, this version is in the color scheme of the famous Patrouille de France aerobatic team. It is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in the classic Patrouille de France color scheme.

Do you feel the need for speed? Then this great-looking, extremely fast Rare Bear Reno Racer from Durafly is for you. It is supplied as a Plug-N-Fly model with minimal parts count, so assembly is quick and simple. There is no gluing required, just one screw holds the tail components in place, and 1 screw for the wing. Battery and radio access is via the large magnetically held canopy hatch, so radio installation and battery changes are very easy and straightforward.

This fantastic-looking XFly 80mm EDF jet is a detailed scale model of a US Airforce T-7A Red Hawk advanced trainer. It is packed full of scale details including molded-in panel lines, simulated antenna, pitot tube, a crystal clear canopy with cockpit detail, missiles, drop tanks, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, full-flying horizontal stabs, and operational flaps.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

The Dancing Wings Hobby Savage Bobber is a small, lightweight foam model that is quick and simple to build. The full-size Savage Bobber was devised by the Zlin Aviation Company. The Bobber as in the motorcycle world means that it is a stripped-down, customized version of an original. The Savage Bobber is a stripped-down, customized version of its older brother the Savage Classic. It is lighter, more maneuverable, and has a slightly narrower fuselage, and the absence of covering to the rear of the fuselage greatly improves the crosswind handling.

The model is reasonably straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction, tough plastic for the open framework rear fuselage, and lightweight balsa for the internal structure. Carbon strips are also included to reinforce and improve the stiffness of the structure. It builds up quickly into a good-looking, fun-to-fly lightweight (only 98g) sports plane that is perfect for indoor or park flying. This ARF kit is supplied with a powerful 1108-4000KV brushless motor, 5A brushless ESC, 5" propeller, and 4 x 2g servos.

This H-King version of this very impressive F-18 Super Hornet is manufactured in EPO foam and is beautifully finished in an authentic USAF color scheme with the decals pre-applied at the factory. The H-King F-18 has outstanding flight characteristics in its own right, it flies like it is on rails, but the pre-installed ORX 6-axis gyro takes this to another level. Pilots of all levels of experience will benefit from using the intermediate gyro setting, this really does improve stability and smoothes out the flight, especially in windy conditions. For beginners and low hours pilots, the flight stabilization system makes it even easier to fly. It utilizes a 32bit MCU for ultra-fast control response and has 3 settings, gyro off, gyro on, and training mode. In the training mode, the gyro gives full stability and also limits the amount of roll and pitch that can be used. In gyro-on mode, this gives slightly less aided stability and does not limit the roll or pitch that can be used, perfect for smooth, jet-style aerobatics. In gyro off mode, it is exactly that, no gyro at all.

The H-King Viper 64 is affordable, very stable, and has predictable handling qualities, making it the ideal choice for your first venture into flying EDF jets. It has stunning looks, and the performance on its 6S set-up gives it a fantastic turn of speed and the ability to perform big, jet-style maneuvers, this makes it also the perfect sports jet for the more experienced RC pilot. The H-King Viper 64 is based on a small two-seater homebuilt jet airplane designed by the Viper Aircraft Corporation in the States during the late 1990s.

The Durafly Me-163B has been designed for pilots with some experience, it benefits from an incredible flight performance, great stability throughout its speed range, and like the real thing, it is incredibly fast. Aerobatics including huge loops, vertical rolls out of sight, and very fast low passes are easily achievable, yet slow it down and it's very stable, with no hint of a stall. Using the recommended 2200mah 30-65C 4S LiPo battery and the supplied 6x4 prop, you can expect flight times well beyond 5 minutes and an abundance of power. If you love speed and very fast models, then this one is for you, the Komet Me-163 is ballistic, with speeds approaching 100mph.

The XFLY A-10 Thunderbolt II is a small, scale twin-EDF model of the iconic US Air Force close attack fighter that is perfect for flying in smaller areas such as local parks, sports fields, etc. The full-size A-10 Thunderbolt affectionately known as the "Warthog", was mainly used for close air support for ground troops and armored vehicles. It was highly maneuverable due to its large ailerons, was very tough and durable, could take a lot of punishment, and it "pièces de résistance" was the Gatling gun mounted in the nose. The actual airframe was designed around this high-powered 30mm gun, it was one of the most powerful guns ever fitted to a plane and could fire up to an amazing 4,200 rounds per minute.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

The XFLY T-7A Red Hawk 750mm EDF jet is an easy-to-fly, versatile EDF trainer that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S compatible power system includes a 12-bladed 64mm fan unit that delivers ample power for an abundance of thrust, speed, and an incredible turbine-like sound. The full-size Boeing-Saab T-7 Red Hawk (originally known as the Boeing T-X) is an American/Swedish advanced jet trainer that was designed to replace the popular Northrop T-38 Talon. The design is smaller, but very similar to the McDonnell Douglas F/A-18 with its large leading edge root extensions, and V-shaped twin vertical tail design. These design features give the full-size incredible maneuverability and excellent low-speed handling, these attributes carry over extremely well to the XFLY model of the T-7A Red Hawk.

The 550mm XK A300 Beechcraft D17S is manufactured to very high standards in tough EPP foam. It is supplied ready to fly (RTF) complete with a Mode 1-2 switchable 2.4GHz 4 channel RC system, a switchable 6-axis gyro, a powerful, efficient brushless motor with ESC, 2 servos, on-board LED lights, 7.4V 600mAh battery, and a USB charging cable. Assembly is very easy and straightforward, all the necessary parts and tools are supplied to get your Staggerwing ready to fly in less than an hour, you just need to supply 6 x "AA" batteries for the transmitter.

After listening to customer feedback the Durafly team has designed this, stunningly painted, Red Edition Me-163 Komet. It is based on the plane that EK16 commander, Wolfgang Spate, flew on the first operational mission. After this flight the plane was returned to it's more traditional color scheme. As well as this stunning color the Durafly team has incorporated a wider tracked 'dolly' to improve ground handling during take-off. The Durafly Me-163 is in itself a truly a ground breaking model. Not only does this Komet feature a fully working scale 'dolly' style undercarriage, blistering performance and a high-quality finish, but it is designed out of the box to accept a model rocket engine! In its Plug and Fly (PnF) form, Durafly's 950mm (37.5") span Me-163 comes with all electronics pre-installed and ready to hook up to your choice of 6ch receiver. A minimal part count allows assembly to be completed in just a few steps. The molded EPO has a highly detailed surface finish externally, carbon reinforcement internally and features a color matched hard plastic belly skid. It also has good access to all electronics via the battery/canopy hatch, excellent cooling through out and of course a very authentic looking scheme. Quality is definitely the name of the game.

Unleash the power and prestige of the limited edition Black Viper 64. This exclusive 6S EDF jet combines stunning looks with explosive speed and beginner-friendly stability.

Strike with style! The H-King Viper 64 EDF Jet has been reborn in a sinister new scheme for a limited edition release. Dressed in a sleek silver and black paint job with a menacing Snake Head logo, this jet is as fast as it looks. Powered by a robust 6S setup, it delivers a breathtaking turn of speed and a realistic turbine-like sound that guarantees to command attention at your flying field.

The 550mm XK A300 Beechcraft D17S is manufactured to very high standards in tough EPP foam. It is supplied ready to fly (RTF) complete with a Mode 1-2 switchable 2.4GHz 4 channel RC system, a switchable 6-axis gyro, a powerful, efficient brushless motor with ESC, 2 servos, on-board LED lights, 7.4V 600mAh battery, and a USB charging cable. Assembly is very easy and straightforward, all the necessary parts and tools are supplied to get your Staggerwing ready to fly in less than an hour, you just need to supply 6 x "AA" batteries for the transmitter.