Самолет

Комплект сменного крыла для H-King Reno Aces P-51 "Galloping Ghost". Включает крышки сервоприводов элеронов, толкатели и заводские наклейки.
ьев с декалями

Сменный комплект фюзеляжа для H-King Reno Aces P-51 "Galloping Ghost" включает заводские наклейки. Обратите внимание, что верхний настил, фонарь и капот не входят в комплект фюзеляжа.

A replacement horizontal stabilizer with elevator for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement cowl with factory-applied decals and mounting screws for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement spinner with backplate for the H-King Reno Aces P-51 "Galloping Ghost".

Сменная крышка люка с золотым навесом для H-King Reno Aces P-51 "Galloping Ghost".

A replacement wing set with servo covers, and pushrods for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".

ホビーキングリノエーシズP-51「ギャロッピングゴースト」の交換用3108-1070KVブラシレスモーター。 これは、PNFモデルに付属している標準モーターです。

A replacement 8x6 propeller for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement set of nacelle protection skid plates for the series of H-King Avro Lancasters, these will fit versions 1, 2, and 3.

Хотите еще больше скорости и мощности для своего H-King Reno Aces P-51 "Galloping Ghost"? Затем перейдите на дополнительную мощную бесщеточную ракету Pro 3108-1160KV и превратите ее в баллистическую ракету с неограниченными вертикальными характеристиками. Нет необходимости менять поставляемый гребной винт или ESC, с этим обновлением подойдут и те, и другие.

A replacement pre-painted fuselage for the Durafly Me-163B V2 "White 10" with tailwheel and factory-applied decals.

Please note:  This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pre-painted canopy/battery hatch for the Durafly Me-163B V2 "White 10" with pilot, and factory-applied decals.

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pair of pre-painted wing panels for the Durafly Me-163B V2 "White 10" with elevons, and factory-applied decals.

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pre-painted vertical stabilizer for the Durafly Me-163B V2 "White 10" with rudder, and decals.

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pre-painted cowl for the Durafly Me-163B V2 "White 10".

Please note:  This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pre-painted take-off dolly with wheels for the Durafly Me-163B V2 "White 10".

Please note:  This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement spinner for the Durafly Me-163B V2 "White 10".

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement set of decals for the Durafly Me-163B V2 "White 10".

Please note:  This replacement part is also suitable for earlier versions of the Durafly Me-163.

A replacement aerial, and pitot head tube for the Durafly Me-163B V2 "White 10".

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163.

A replacement accessory set for the Durafly Me-163B V2 "White 10". Includes, hex-wrench, pushrods, snap links, control horns, and control horn mounting screws.

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163.

A replacement 2836-2200Kv brushless motor with prop adapter for the Durafly Me-163B V2 "White 10".

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163.

A replacement canopy/battery hatch for the Durafly D.H.100 Vampire V3 RAF Camo edition.

Please note: This replacement part will also fit earlier versions of the Durafly D.H.100 Vampire.

A replacement pair of wings for the Durafly D.H.100 Vampire V3 RAF Camo edition.

Please note: This replacement part will also fit earlier versions of the Durafly D.H.100 Vampire.

A replacement set of tailbooms for the Durafly D.H.100 Vampire V3 RAF Camo edition.

Please note: This replacement part will also fit earlier versions of the Durafly D.H.100 Vampire.

A replacement horizontal stabilizer with elevator for the Durafly D.H.100 Vampire V3 RAF Camo edition.

Please note: This replacement part will also fit earlier versions of the Durafly D.H.100 Vampire.

A replacement fuselage with nosewheel fairing for the Durafly D.H.100 Vampire V3 RAF Camo edition.

Please note: This replacement part will also fit earlier versions of the Durafly D.H.100 Vampire.

Замена части фюзеляжа. Поставляется с магнитами и пластиковые фитинги , но не включает в себя обтекатель.

Замена главное крыло поставляется с контрольными рогами установлены.

Durafly® ™ Messerschmitt Bf.110 - Замена радиатора Set (1pair)

Durafly ™ 5-Blade Spifire Set-концентратор

P-51D Шангри Ла - Замена горизонтального оперения

This H-King version of this very impressive F-16 Fighting Falcon is manufactured in EPO foam and is beautifully finished in an authentic USAF color scheme with the decals pre-applied at the factory. The H-King F-16 has outstanding flight characteristics in its own right, it flies like it is on rails, but the pre-installed ORX 6-axis gyro takes this to another level. Pilots of all levels of experience will benefit from using the intermediate gyro setting, this really does improve stability and smoothes out the flight, especially in windy conditions. For beginners and low hours pilots, the flight stabilization system makes it even easier to fly. It utilizes a 32bit MCU for ultra-fast control response and has 3 settings, gyro off, gyro on, and training mode. In the training mode, the gyro gives full stability and also limits the amount of roll and pitch that can be used. In gyro-on mode, this gives slightly less aided stability and does not limit the roll or pitch that can be used, perfect for smooth, jet-style aerobatics. In gyro off mode, it is exactly that, no gyro at all.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.