Самолет

The H-King MX2 Extreme 30E is perfect to take a pilot from general sport flying to confidently flying 3D aerobatics. It is lightweight, has a powerful brushless motor set-up, and features large control surfaces that make it great for lively tumbling and extreme, spirited types of flying. Things such as hovering, waterfalls, harriers, knife-edge, rolling circles, and other extreme 3D aerobatics are made much easier when flying the MX2 Extreme.

The Phoenix V2 2000 is a quick and easy to assemble electric powered glider with flaps and large ailerons for a precise, aerobatic performance. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

A replacement AVIOS Extra 330LX V2 left-wing with factory-applied decals.

Note: This replacement will also fit the AVIOS Extra 3300LX V1, but the color scheme will of course be different.

A replacement AVIOS Extra 330LX V2 right-wing with factory-applied decals.

Note: This replacement will also fit the AVIOS Extra 3300LX V1, but the color scheme will of course be different.

A replacement AVIOS Extra 330LX V2 horizontal stabilizer with hinged elevator and factory-applied decals.

Note: This replacement will also fit the AVIOS Extra 3300LX V1, but the color scheme will of course be different.

A replacement AVIOS Extra 330LX V2 vertical stabilizer with hinged rudder and factory-applied decals.

Note: This replacement will also fit the AVIOS Extra 3300LX V1, but the color scheme will of course be different.

A replacement set of AVIOS Extra 330LX V2 wing side-force generators. 

Note: This replacement set will also fit the AVIOS Extra 3300LX V1, but the color scheme will of course be different.

A replacement AVIOS Extra 330LX V2 carbon wing spar.

Note: This replacement will also fit the AVIOS Extra 3300LX V1.

A replacement fuselage for the H-King MX2 Extreme 30E.

A replacement wing set for the H-King MX2 Extreme 30E.

A replacement motor cowl for the H-King MX2 Extreme 30E.

A replacement battery hatch with canopy and pilot for the H-King MX2 Extreme 30E.

A replacement horizontal stabilizer with elevator for the H-King MX2 Extreme 30E.

A replacement rudder with control horn for the H-King MX2 Extreme 30E.

A replacement carbon wing joining spar for the H-King MX2 Extreme 30E.

A replacement spinner with backplate for the H-King MX2 Extreme 30E.

A replacement carbon landing gear for the H-King MX2 Extreme 30E.

A replacement 13x4 composite propeller for the H-King MX2 Extreme 30E.

A replacement 3720-900KV brushless motor with prop shaft for the H-King MX2 Extreme 30E.

Wargo Signature Edge 540T 3D - еще один невероятный самолет из серии, вдохновленной знаменитым 3D-пилотом Майклом Варго. Edge 540T был специально разработан для очень точных трехмерных полетов и фигур высшего пилотажа. Майкл Варго, пилот нашей команды и эксперт по 3D, хотел, чтобы самолет из вспененного материала был жестче и легче других вспененных материалов. Это было достигнуто за счет сочетания жесткой и легкой рамы из бальзы, покрытой легкой, устойчивой к ударам пеной PP.

The H-King FG-1 Corsair "Lucky Gallon" is the third in the mini-series from H-King, the "Reno Aces", WW2 fighters dressed to impress at the air races. The FG-1 Corsair "Lucky Gallon" with the included stock 3108-1070KV brushless motor offers a really quick model straight out of the box with speeds approaching 100mph when using the recommended 2200mAh 4S LiPo. However, if you are an experienced hand and are looking for 100+ mph speeds then there is the optional drop-in fit 3108-1170KV 'Pro' brushless motor. This will give your great-looking Reno Ace really ballistic performance on the same prop, ESC, and 4S battery for those that can handle the extra rotational torque on launch.

A replacement pre-painted wing complete with ailerons and factory-applied decals for the H-King FG-1 Corsair "Lucky Gallon".

A replacement pre-painted fuselage complete with rudder, motor mounting box, and factory-applied decals for the H-King FG-1 Corsair "Lucky Gallon".

A replacement pre-painted horizontal stabilizer complete with elevator, and elevator control horn for the H-King FG-1 Corsair "Lucky Gallon".

A replacement pre-painted motor cowl complete with dummy engine for the H-King FG-1 Corsair "Lucky Gallon".

A replacement pre-painted hatch cover with 1 x clear canopy, and 1 x silver-painted canopy for the H-King FG-1 Corsair "Lucky Gallon".

A replacement prop adapter with domed spinner nut for the H-King FG-1 Corsair "Lucky Gallon".

This H-King version of this very impressive F-16 Fighting Falcon is manufactured in EPO foam and is beautifully finished in an authentic USAF color scheme with the decals pre-applied at the factory. The H-King F-16 has outstanding flight characteristics in its own right, it flies like it is on rails, but the pre-installed ORX 6-axis gyro takes this to another level. Pilots of all levels of experience will benefit from using the intermediate gyro setting, this really does improve stability and smoothes out the flight, especially in windy conditions. For beginners and low hours pilots, the flight stabilization system makes it even easier to fly. It utilizes a 32bit MCU for ultra-fast control response and has 3 settings, gyro off, gyro on, and training mode. In the training mode, the gyro gives full stability and also limits the amount of roll and pitch that can be used. In gyro-on mode, this gives slightly less aided stability and does not limit the roll or pitch that can be used, perfect for smooth, jet-style aerobatics. In gyro off mode, it is exactly that, no gyro at all.

The incredible Frenzy is the perfect all-rounder. With reduced control throws it's a smooth, stable, and remarkably easy to fly plane that is perfect for the novice or beginner. Increase those throws, and with its high power-to-weight ratio on a 3S set-up, the Frenzy lives up to its name. It is capable of a wide range of amazing aerobatic maneuvers and will meet the demands of even the most ambitious aerobatic pilot.

After the success of the EFX Racer, it was decided to produce a mini version, as they say, all good things also come in small packages, so the MFX Racer was born. The MFX has been designed to the same exacting standards as its bigger brothers and still offers speed, strength, agility, and the stability you have come to expect from a Durafly model. In addition, you get the simplicity of assembly and the quality that only an EPO model from Durafly can offer.

This beautiful model of a North American T-28 Trojan USAF Military Trainer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

The 550mm XK A300 Beechcraft D17S is manufactured to very high standards in tough EPP foam. It is supplied ready to fly (RTF) complete with a Mode 1-2 switchable 2.4GHz 4 channel RC system, a switchable 6-axis gyro, a powerful, efficient brushless motor with ESC, 2 servos, on-board LED lights, 7.4V 600mAh battery, and a USB charging cable. Assembly is very easy and straightforward, all the necessary parts and tools are supplied to get your Staggerwing ready to fly in less than an hour, you just need to supply 6 x "AA" batteries for the transmitter.

This fantastic looking XFly 80mm EDF jet is a detailed scale model of the French Air Force Alpha Jet, it is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, removable gun pod, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in a French Air Force color scheme.

This fantastic-looking XFly 80mm EDF jet is a detailed scale model of the Dassault/Dornier Alpha Jet, this version is in the color scheme of the famous Patrouille de France aerobatic team. It is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in the classic Patrouille de France color scheme.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.