Самолет

This beautiful model of a North American T-28 Trojan USAF Military Trainer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

The Dancing Wings Hobby Savage Bobber is a small, lightweight foam model that is quick and simple to build. The full-size Savage Bobber was devised by the Zlin Aviation Company. The Bobber as in the motorcycle world means that it is a stripped-down, customized version of an original. The Savage Bobber is a stripped-down, customized version of its older brother the Savage Classic. It is lighter, more maneuverable, and has a slightly narrower fuselage, and the absence of covering to the rear of the fuselage greatly improves the crosswind handling.

The model is reasonably straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction, tough plastic for the open framework rear fuselage, and lightweight balsa for the internal structure. Carbon strips are also included to reinforce and improve the stiffness of the structure. It builds up quickly into a good-looking, fun-to-fly lightweight (only 98g) sports plane that is perfect for indoor or park flying. This ARF kit is supplied with a powerful 1108-4000KV brushless motor, 5A brushless ESC, 5" propeller, and 4 x 2g servos.

The Dancing Wings Hobby Shining is a large lightweight profile-style foam kit that is quick and simple to build. It has been designed to be the perfect introduction to 3D flying and will perform extreme 3D maneuvers such as waterfalls, harriers, knife-edge loops, rolling circles, and much more.

The model is very straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction so the parts count is quite low, and carbon strips are supplied for strengthening. It builds up quickly into a good-looking, fun-to-fly lightweight extreme sport 3D plane that is perfect for park flying and on playing fields. This ARF model is supplied with a powerful 2216-950KV brushless motor, 30A brushless ESC, 10" propeller, and 4 x 9g servos.

The ZOHD Dart 250G is the small brother to the popular Dart XL, it is the world's first high-end sub 250g FPV flying wing. With increasing regulations affecting our hobby, it offers an FPV experience without as much hassle as the bigger, heavier models. You will still need to check your country's regulations, some do require you to register a model airplane with a camera on it even when below 250g. The little Dart 250G offers incredible lifting power despite its size, excellent handling, and portability, which makes it the ideal choice for FPV flying in a small package. Features include an optimized airfoil, dedicated equipment bay for flight controller and GPS, nose camera bay, super durable Teflon-covered underbelly, protected leading edge to the wing, and so much more.

The ZOHD Dart 250G is the small brother to the popular Dart XL, it is the world's first high-end sub 250g FPV flying wing. With increasing regulations affecting our hobby, it offers an FPV experience without as much hassle as the bigger, heavier models. You will still need to check your country's regulations, some do require you to register a model airplane with a camera on it even when below 250g. The little Dart 250G offers incredible lifting power despite its size, excellent handling, and portability, which makes it the ideal choice for FPV flying in a small package. Features include an optimized airfoil, dedicated equipment bay for flight controller and GPS, nose camera bay, super durable Teflon-covered underbelly, protected leading edge to the wing, and so much more.

The ZOHD Talon GT Rebel FPV airplane offers a revolutionary design for those enthusiasts seeking unmatched performance and versatility. The Talon GT Rebel combines state-of-the-art technology with the best of old-school practices which offers an unparalleled flying experience. This portable design is very easy to assemble, no glue is required, and the wings and tail remain detachable making it very easy to transport, even in a backpack for when trekking to those out-of-the-way places.

Do you feel the need for speed? Then this great-looking, extremely fast Rare Bear Reno Racer from Durafly is for you. It is supplied as a Plug-N-Fly model with minimal parts count, so assembly is quick and simple. There is no gluing required, just one screw holds the tail components in place, and 1 screw for the wing. Battery and radio access is via the large magnetically held canopy hatch, so radio installation and battery changes are very easy and straightforward.

Представляем наш EPP 3D MX2. Благодаря фантастический дизайн и оформление, это все из EPP 3D'er удовлетворит самые нетерпеливые 3D пилотов!

Это Фюзеляж кручение очень жесткий, но легкий с нагрузками пространства под длинной верхней люк для радио и системы питания. Крыло одна часть дело с участием EPP конструкция, представляющая собой очень точный симметричный профиль крыла с 2-х дополнительных лонжеронов, чтобы свести к минимуму гибкость и твист. Поверхности управления являются чем-то еще - лифт, руль направления и элероны имеют конструкцию 3 слоя (EPP-Depron-EPP), что делает для жестких поверхностей и не прогибается при экстремальных бросков! Привязать валков Привязать 'и реакция управления мгновенно.

Свет - еще жесткая - планера добавляет к одной большой летающей 3D 'пенистого'. Водопады, луни, плоские спины, прокатные круги эта модель имеет точность, чтобы выполнить эти и любые другие шаги, вы можете думать!

Сборка планера в быстром процессе 10-15 минут с помощью небольшого среднего CA. Радио и система питания макеты очень проста, длинный верхний люк делает для легкого доступа.

Это отличная модель для общего полета парка и хардкор 3D. Вам будет трудно разорвать эту модель, он будет принимать жесткие удары и просто держать отскакивая назад каждый раз!


Особенности:
• Прочный EPP материал, легкий и устойчивый краш
• Stiff EPP / Depron поверхности составного элемента управления
• Революционная конструкция добавляет к структурной целостности и жесткости планера
• Легкий обеспечивает оптимальную нагрузку крыла
• Отличная пилотажной производительность и 3D маневренности.
• Простая конструкция обеспечивает легкий доступ и монтаж оборудования
• Стенд из цветовая схема отлично подходит для ориентации


Технические характеристики:
Размах: 955mm
Длина: 945mm
Площадь крыла: 15.2dm2
Вес: 550г (без батареи)




Требуется:
Система радиосвязи 4 канала
2217 950-1100KV Бесщеточный скороход
30Amp ESC
3S 11.1V 1100-1300MAH Li-Po
10x4.7 / 11x4.7 пропеллер
4 х 9g сервоприводы

After the success of the original H-King FLYCAT 70mm EDF jet, which was a basic aileron, elevator, and throttle-only model, we now have the FLYCAT V2. This new version has an upgraded power setup with a brushless inrunner motor and Aerostar RVS G2 ESC, twin rudders, a set of pre-installed electronic retracts, and a brand-new high-viz color scheme. It retains from the V1 its stunning streamlined looks, agility, performance, and impeccable flying characteristics.

With a new more powerful setup, the 2860-2100KV brushless inrunner motor and the 12-blade EDF unit make the Flycat V2 not only quite a bit faster, but it improves the verticals and it also sounds amazing, just like a real turbine, especially when doing fast, high-speed passes. Coupled with the motor and EDF unit is one of our Aerostar 80A RVS G2 speed controllers, this not only gives you solid reliability, it also offers you the choice of instant reverse. If you are flying from a hard runway this helps shorten the landing run quite considerably when selected after touchdown. Another feature of the FLYCAT V2 is the twin-rudders, these bring in another dimension when flying the V2. It is now able to perform even more jet-like maneuvers including falling leaves and knife-edge, etc, and they also help in the approach to landing and when flying at slower speeds. The new high-viz color scheme not only looks great, but it stands out well in the sky which helps orientation when flying big, fast aerobatic maneuvers. Last but not least on the V2 there is no need for hand-launching, it comes with a set of pre-installed grass-capable electronic retracts. These robust and reliable retracts enable smooth take-offs and landings on hard and grass runways

Do you feel the need for speed? Then this great-looking, extremely fast Rare Bear Reno Racer from Durafly is for you. It is supplied as a Plug-N-Fly model with minimal parts count, so assembly is quick and simple. There is no gluing required, just one screw holds the tail components in place, and 1 screw for the wing. Battery and radio access is via the large magnetically held canopy hatch, so radio installation and battery changes are very easy and straightforward.

Этот маленький набор занимает около 4 ч, чтобы построить и будет удовлетворять дроссельную Jocky во всех нас!

FlyCat поставляется с 56 мм EDF и вам потребуется 25A ESC & 4800kv Inrunner.

Этот самолет очень быстро, (более 100 миль в час!), Однако по-прежнему стабильным при медленном полете.

Спекуляция
Размах: 640mm
Длина: 800мм
Вес: 290г
BESC: 25A (не входит в комплект )
Двигатель: 4800kv 20-30 размер Inrunner (не входит в комплект )
LiPoly: 1300mAh 11.1V 20C (не входит в комплект )

Необходимые.
Двигатель и ESC
3 х 9g Servo
5 или 10мин эпоксидной смолы (Araldite)
1 х Servo Y свинца
1 х Servo Удлинитель свинца
12AWG кремния провод (20см Для двигателя к ESC)
Батарея 1300mAh 11.1V 20C Lipo
Ваш собственный приемник и передатчик

Наш отчет полета.

Комплект подходит вместе хорошо, Подшлифовка передние и задние кромки, необходимые для удаления лишних пены. Мы решили не укреплять крыло с CF трубки, который в штрафной оказаться проблемой, даже при полной скорости высокой G поворотов.

Мы решили смонтировать BESC будучи в области батареи, в случае необходимости батареи, чтобы переместить вперед, чтобы отрегулировать CofG, однако это не было необходимо.

EDF был установлен на палочке горе. Стик монтаж был сокращен, с дополнительной части, используемой для повышения EDF от палки, чтобы очистить EDF саван. 2 болта держал блок вентилятора к палке, один до и один после лопастей вентилятора.

Первый полет.

Мы держали CofG 9.5cm от вершины крыльев передней кромки. FlyCat была рука запущена на 3/4 дроссельной заслонки, ускорения быстро. К нашему удивлению, не требовалось подрезка.

FlyCat чрезвычайно быстрый набор для того чтобы летать, и требуется много лифта в поворотах. Мы предлагаем поставить лифт на максимум бросков. Это требует огромных количеств лифта во время поворотов!

В целом отличный самолет, который летит ровно, даже в ветреные дни.

Мы предлагаем хороший пакет Lipo, так как эта маленькая грелка будет жевать через 1500mAh всего за 5 минут. Мы использовали 3S1P пакет ZIPPY-R 1800mAh 22C около 8 минут полета. По сравнению с ZIPPY-Q пакет, который принес нам короткий около 7 минут.

Готовы ли вы быть Красный Барон вашего местного парка? Ну с фантастическим фон Стик вы можете быть летающий туз в течение нескольких минут.

Большой медленный дизайн палку, то фон Стик было сделано, чтобы быть супер-легкий, летать где угодно модель, с мощным редукторный двигатель работает от батареи 1S 3.7V 400mAh LiPoly.

Поставляется со своим собственным 2.4Ghz радио для помех свободного полета, легко собрать и закончил в поразительном Red Baron отделкой, с Von Стик вы будете делать дайвинг атаки и обстреливая работает в самое короткое время.

Легко летать с его основным рулевым и управления лифтами системы и очень снисходительно для начинающего пилота. На самом деле, фон Стик делает для идеальной первой модели для любого молодого человека или даже для опытного пилота, который ищет полностью потеху полетов самолетов, которые могут быть выброшены в местном парке, без суеты.

Особенности:
• Система радиосвязи 2.4GH
• Легкий вес
• Простота сборки
• Rudder / модель Лифт
• Идеально подходит для начинающих
• Красивая отделка смелый "Красный Барон"

Технические характеристики:
Размах: 52см
Длина: 38см
RC система: 2.4Ghz
Пропеллер: 6050 (slowfly)
Вес: 75г
Батарея Требуемое: 1S 3.7V 350-400mAh LiPoly
Расстояние управления: 150 м
Режим: 2

The H-King Teksumo is a fun combat wing made from almost unbreakable EPP foam that is easy to build and will provide hours of fun! It comes in four unique colors so you and your flying buddies can have hours of fun ripping up the sky with some high adrenalin combat.

This H-King version of this very impressive F-18 Super Hornet is manufactured in EPO foam and is beautifully finished in an authentic USAF color scheme with the decals pre-applied at the factory. The H-King F-18 has outstanding flight characteristics in its own right, it flies like it is on rails, but the pre-installed ORX 6-axis gyro takes this to another level. Pilots of all levels of experience will benefit from using the intermediate gyro setting, this really does improve stability and smoothes out the flight, especially in windy conditions. For beginners and low hours pilots, the flight stabilization system makes it even easier to fly. It utilizes a 32bit MCU for ultra-fast control response and has 3 settings, gyro off, gyro on, and training mode. In the training mode, the gyro gives full stability and also limits the amount of roll and pitch that can be used. In gyro-on mode, this gives slightly less aided stability and does not limit the roll or pitch that can be used, perfect for smooth, jet-style aerobatics. In gyro off mode, it is exactly that, no gyro at all.

You’ll slice through the sky with this brilliantly colored SkySword. The streamlined looks and elegant lines show that this plane is built for speed. It comes with a 70mm 12-blade EDF fan to provide that realistic jet sound.

The ZOHD Dart XL FPV flying wing airplane offers incredible lifting power, excellent handling, and portability, making it the ideal choice for long-range FPV flying. This "Enhanced Version" features a newly designed motor mount, a GPS bay with cover, built-in carbon fiber for strength, a new optimized airfoil, and a strengthened battery bay. The Dart XL incorporates Vortex generators and reversed wingtips for improved handling, lift efficiency, and yaw stability. It also has a computer-designed airflow pod that maximizes the cooling to all the onboard equipment to minimize overheating electronics and reduce the risk of failure. The vertical fins are detachable, making it much easier to transport to those out-of-the-way places for the best FPV experiences.

Если вы тягаете скорость, EFXTRA - это то, где он находится, с внешним выступлением, превышающим более 100 миль в час. Durafly сохранил дух гонщика EFX и сосредоточился на добавлении дополнительных характеристик, таких как невероятный ролл и ставки подъема.

Есть много высокопроизводительных функций и новых дополнений по гонщику EFX. Durafly Efxtra может похвастаться новым обрезанным крылом (975 миллиметров), чтобы дать экстремальные расходы. Модернизированный бесщеточный двигатель 356-1780KV (с использованием ультраскоростных японских подшипников) с Aerostar Aerostar 60A был добавлен и оптимизирован, до 4s производительности. Более высокая скорость, более высокий крутящий момент цифровой 9G сервоприводы (металл, ориентированные на айлеронах) вместе с разъемами связей шарикового соединения обеспечивают истинный контроль точности всех поверхностей, независимо от того, какую скорость вы путешествуете. Мы даже включили монтаж FPV в коробке для наркоманов адреналина, которые любят жить жизнью на краю.

Если вы жаждете скорости, EFXtra - это то, что вам нужно, с заводской производительностью, превышающей 100 миль в час. Durafly сохранил дух EFX Racer и сосредоточился на добавлении дополнительных характеристик, таких как невероятная скорость крена и подъема.

The Durafly Carbon Arcus is a sleek and beautiful F3A biplane designed to perform smooth, F3A-style pattern aerobatics and is the perfect choice for honing your aerobatic skills. It features a durable, lightweight EPO airframe with carbon reinforcement, aluminum landing gear, carbon interplane struts, and an advanced 4S motor and prop combination that offers a high power-to-weight ratio for unending verticals and incredible performance.

Flying the Arcus F3A is a dream, the long tail moment, the low wing loading, and the abundance of power give you a stable and predictable airplane. Take-offs require very little rudder input, rolls are crisp and axial, and loops can be as large as you wish. The large propeller provides ample braking action in the downlines to avoid overspeeding, and if you enjoy flying knife-edge, then the Arcus II performs this with ease. No roll or pitch coupling here, just apply a touch of rudder, control the throttle to hold your line, and the Arcus will knife edge until the cows come home. Finally, when the time comes, throttle back, and the Carbon Arcus settles into a nice sink rate for a perfect 3-point landing every time.

Этот великолепно выглядящий маленький гонщик может проследить свою родословную до очень популярного Редкого Медведя, которого мы продали несколько лет назад. Это был очень быстрый паркер, основанный на гонках Reno Racers, который доставлял невероятное удовольствие от полета, был очень жестким и очень быстро стал фаворитом фирмы.

The H-King FG-1 Corsair "Lucky Gallon" is the third in the mini-series from H-King, the "Reno Aces", WW2 fighters dressed to impress at the air races. The FG-1 Corsair "Lucky Gallon" with the included stock 3108-1070KV brushless motor offers a really quick model straight out of the box with speeds approaching 100mph when using the recommended 2200mAh 4S LiPo. However, if you are an experienced hand and are looking for 100+ mph speeds then there is the optional drop-in fit 3108-1170KV 'Pro' brushless motor. This will give your great-looking Reno Ace really ballistic performance on the same prop, ESC, and 4S battery for those that can handle the extra rotational torque on launch.

After the success of the EFX Racer, it was decided to produce a mini version, as they say, all good things also come in small packages, so the MFX Racer was born. The MFX has been designed to the same exacting standards as its bigger brothers and still offers speed, strength, agility, and the stability you have come to expect from a Durafly model. In addition, you get the simplicity of assembly and the quality that only an EPO model from Durafly can offer.

This beautiful model of a Grumman F8F Rare Bear Reno Racer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

The ZOHD Altus FPV airplane offers cutting-edge technology for those enthusiasts seeking unmatched performance and versatility. The Altus combines state-of-the-art technology with a practical design and offers an unparalleled flying experience. This portable design is very easy to assemble, no glue is required, and the wings and tail are detachable making it very easy to transport, even in a backpack for when trekking to those out-of-the-way places.

Are you looking for extreme speed right out of the box? If so, we've got you covered. There is plenty of rad in the Radjet 800! With its amazing price, EPO foam, and being Plug and Fly, this brilliant model has no trouble earning the Radjet name.

After the success of the EFX Racer, it was decided to produce a mini version, as they say, all good things also come in small packages, so the MFX Racer was born. The MFX has been designed to the same exacting standards as its bigger brothers and still offers speed, strength, agility, and the stability you have come to expect from a Durafly model. In addition, you get the simplicity of assembly and the quality that only an EPO model from Durafly can offer.

The ZOHD Drift is a super easy, hand-launch slow-fly pusher glider that has been designed specifically for FPV flying. It is extremely stable in flight, but the controls remain very responsive and accurate. Being a pusher prop design gets the prop well away from the ground, and the hands when launching, it also allows the camera an uncluttered viewing angle.

The Drift is very easy to assemble, no glue is required, and the wing and tail boom remain detachable, making for easy transportation. The Drift has a large battery bay for extended flight times, plus a nose camera bay compatible with most FPV, and AIO cameras available today. It also has a dedicated equipment bay for the flight controller, and  GPS unit, etc. The strong EPP foam airframe also benefits from a tough, specially designed H-girder spar for the wing, built-in CF inside the fuselage for enhanced strength, and CF pushrods throughout for precision control.

H-King P-51 «Galloping Ghost» - первый в новой мини-серии от H-King, «Reno Aces», истребитель Второй мировой войны, одетый, чтобы произвести впечатление на воздушных гонках. P-51 «Galloping Ghost» с включенным в комплект поставки бесщеточным двигателем 3108-1070KV предлагает действительно быструю модель прямо из коробки со скоростью, приближающейся к 100 милям в час при использовании рекомендованного 4S LiPo 2200 мАч. Однако, если вы опытный специалист и ищете скорость 100+ миль в час, то есть дополнительный бесщеточный двигатель 3108-1170KV «Pro». Это придаст вашему великолепному Reno Ace действительно баллистические характеристики на том же винте, ESC и батарее 4S для тех, кто может справиться с дополнительным крутящим моментом при запуске.

This H-King version of this very impressive F-16 Fighting Falcon is manufactured in EPO foam and is beautifully finished in an authentic USAF color scheme with the decals pre-applied at the factory. The H-King F-16 has outstanding flight characteristics in its own right, it flies like it is on rails, but the pre-installed ORX 6-axis gyro takes this to another level. Pilots of all levels of experience will benefit from using the intermediate gyro setting, this really does improve stability and smoothes out the flight, especially in windy conditions. For beginners and low hours pilots, the flight stabilization system makes it even easier to fly. It utilizes a 32bit MCU for ultra-fast control response and has 3 settings, gyro off, gyro on, and training mode. In the training mode, the gyro gives full stability and also limits the amount of roll and pitch that can be used. In gyro-on mode, this gives slightly less aided stability and does not limit the roll or pitch that can be used, perfect for smooth, jet-style aerobatics. In gyro off mode, it is exactly that, no gyro at all.

The Durafly Me-163B has been designed for pilots with some experience, it benefits from an incredible flight performance, great stability throughout its speed range, and like the real thing, it is incredibly fast. Aerobatics including huge loops, vertical rolls out of sight, and very fast low passes are easily achievable, yet slow it down and it's very stable, with no hint of a stall. Using the recommended 2200mah 30-65C 4S LiPo battery and the supplied 6x4 prop, you can expect flight times well beyond 5 minutes and an abundance of power. If you love speed and very fast models, then this one is for you, the Komet Me-163 is ballistic, with speeds approaching 100mph.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

When Durafly released the original Auto-G it raised the bar by being the first Plug-N-Fly autogyro on the market, that bar has been raised even higher with the Auto-G2 V2. Keeping to the Durafly tradition, it is quick and simple to assemble, flies extremely well, and looks amazing in flight. The V2 upgrades include the addition of a durable 2mm fiber-reinforced nylon head plate, fiber-reinforced pushrods, a fully encased main mast, wider, stronger landing gear with large lightweight bush-style foam wheels, and a cowled-in motor, plus smaller internal electronics giving more space for the flight battery.

The 550mm XK A300 Beechcraft D17S is manufactured to very high standards in tough EPP foam. It is supplied ready to fly (RTF) complete with a Mode 1-2 switchable 2.4GHz 4 channel RC system, a switchable 6-axis gyro, a powerful, efficient brushless motor with ESC, 2 servos, on-board LED lights, 7.4V 600mAh battery, and a USB charging cable. Assembly is very easy and straightforward, all the necessary parts and tools are supplied to get your Staggerwing ready to fly in less than an hour, you just need to supply 6 x "AA" batteries for the transmitter.