Самолет

Replacement tailplane and fin for the Durafly V2 Ugly Stick (Blue), the elevator and rudder come ready hinged and the fin includes decals.

Replacement landing gear for the Durafly V2 Ugly Stick (Blue).

Replacement main wing for the Durafly V2 Ugly Stick (Blue). Supplied with decals, pre-hinged ailerons and control horns.

Запасной фюзеляж для Durafly Goblin Racer в желтом / черном / серебристом цвете.

Запасное крыло для Durafly Goblin Racer в желтом / черном / серебристом цвете.

Замена задней панели и лифта для Durafly Goblin Racer в желтом / черном / серебристом цветах.

Запасной плавник и руль в сборе для Durafly Goblin Racer в желтом / черном / серебристом цветах.

Запасной черный блесна для Durafly Goblin Racer.

Запасной бесщеточный мотор 3536-1400KV для Durafly Goblin Racer.

Replacement decal set for the Durafly Goblin Racer in Yellow/Black/Silver.

Replacement fuselage for the Durafly Goblin Racer in Pink/Blue/Black.

Replacement wing for the Durafly Goblin Racer in Pink/Blue/Black.

Replacement tailplane and elevator for the Durafly Goblin Racer in Pink/Blue/Black.

Replacement fin/rudder assembly for the Durafly Goblin Racer in Pink/Blue/Black.

This compact F3 Flight Controller includes a FrSky receiver unit and 4 integrated 20A ESCs. It utilizes the DShot 600 protocol (Betaflight compatible) to communicate between the flight controller and the ESCs, proven and tested sensors, and a next-generation CPU. This small, lightweight package delivers reliability and incredible flight performance.

Specs:
Input Voltage: 2-3S (they may handle 4S)
Receiver: FrSky compatible
ESC Protocol: DShot 600
ESC Output: 4 x 20A
Power Input Connector: JST
Dimensions: 20mmx20mm

H-King Avro Lancaster V3 "Dumbo" Replacement Fuselage w/Decals & Tailwheel.

Note: These replacement parts are predominantly for the Lancaster V3 due to the color scheme, however, they will also fit versions 1 and 2.

H-King Avro Lancaster V3 "Dumbo" Replacement Main Wings w/Decals.

Please note: No motors, ESC's or servos are included, these are the foam parts only.

H-King Avro Lancaster V3 "Dumbo" Replacement Horizontal Stabilizer w/Elevators.

Note: These replacement parts are predominantly for the Lancaster V3 due to the color scheme, however, they will also fit versions 1 and 2.

H-King Avro Lancaster V3 "Dumbo" Replacement Vertical Stabilizers.

Note: These replacement parts are predominantly for the Lancaster V3 due to the color scheme, however, they will also fit versions 1 and 2.

H-King Avro Lancaster V3 "Dumbo" Replacement Nose Dome (Bomb Aimers Dome) and Gun Turret Set.

Note: These replacement parts are predominantly for the Lancaster V3 due to the color scheme, however, they will also fit versions 1 and 2.

These optional servoless electric retracts have been designed for the H-King Avro Lancaster and include scale looking wheels, they are suitable for versions 1, 2, and 3.

KingKong Multirotor Propeller 6x4 CW Black (10pcs)

Includes:
10 x 6040 Propellers (CW)

A replacement fuselage with canopy for the Volantex Ranger 1600, and Ranger 2000 electric gliders.

The Ranger 2000 is easy to assemble and features a large wingspan which provides stability, and also allows the model to fly at slow speeds. The EPO wings are fitted with two spars for strength and each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Ranger 2400 is a large electric powered pusher glider that has been specifically designed for FPV flying.  The enormous fuselage has plenty of room for large capacity or twin battery packs, radio and stabilizer components, FPV equipment, and molded into the front just below the nose is a purpose-made provision for an FPV camera. Also included is the usual Volantex camera mount that can take the place of the black canopy if you wish. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 robust metal spars join the wings to the fuselage. Also, each of the large ailerons is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using the popular Volantex fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix V2 2000 is a quick and easy to assemble electric powered glider with flaps and large ailerons for a precise, aerobatic performance. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix 2400 is an extended wing version of the popular Phoenix 1600mm and 2000mm range of electric powered gliders. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

Volantex Ranger 1600 and Phoenix 1600 Replacement Fin/Rudder/Horizontal Stabilizer.

Volantex ASW 28 Replacement V3 4018-1050KV Brushless Motor.

A replacement canopy for the Volantex Ranger 1600, Ranger 2000, and Phoenix V2 electric aircraft.

Volantex Ranger 1600 Replacement Control Horns (6 sets).

Volantex Phoenix 2400 Replacement Fuselage w/Canopy & Wheel.

Volantex Ranger 1600/2000/Phoenix V2 Replacement Camera Mount Canopy.