Самолет

Эта версия Як-11 - Red Reno Racer, это не полная цветовая схема, а в некоторой степени основана на Strega P-51 Reno Mustang. Как упоминалось выше, будучи гоночной версией, он снабжен трансмиссией, разработанной для чистой скорости. Используя батарею 6S LiPo, бесщеточный двигатель 5052-550KV с прилагаемым ESC 95A и пропеллером 16x6 даст Як-11 невероятную скорость до 125 миль в час. Это быстро, и увидеть, как модель такого внушительного размера делает быстрые повороты пилона рядом с землей, - это зрелище. Высший пилотаж - тоже мечта исполнить на Яке, крены очень осевые, а маневры по петле большие из-за обилия мощности. Единственным ограничением для фигур высшего пилотажа, которые он будет выполнять, являются ваши летные навыки.

The HobbyKing™ Paramotor is extremely easy to fly due to its very gentle and stable flight characteristics yet once you are used to it, it will perform loops and rolls with ease. Due to the design, the huge high-performance 2250mm sail opens quickly for easy launching and it will retain its shape even in turbulence. The single skin durable sail is made from 100% ripstop fabric and comes pre-rigged with tough nylon chords that are ready to attach to the durable aluminum gondola.

Эта версия Як-11 основана на полноразмерном самолете, который в настоящее время летает в Германии, а цветовая схема соответствует французским единицам, которые летали для русских во время Второй мировой войны. Как упоминалось выше, будучи версией Warbird, он снабжен трансмиссией, рассчитанной на больший крутящий момент. При использовании блока LiPo 6S бесщеточный двигатель 5052-410KV с прилагаемым ESC 95A и пропеллером 17x10 по-прежнему обеспечит Як-11 впечатляющую скорость поворота до 100 миль в час, но нужно убедиться в его вертикальных характеристиках. Большие, масштабные маневры боевой птицы - это мечта, чтобы летать с таким крутящим моментом и мощностью, а маневры крена очень осевые. Произведите впечатление на зрителей медленными чешуйчатыми парашютами с закрылками и опущенными колесами, или быстрыми, низкими разбегами и подтягиванием до полукубинской восьмерки, или аналогичным маневром. Як-11 в этой памятной цветовой гамме выглядит фантастически со всех сторон в полете или сидя на земле.

This great-looking and superb flying Avios KingTwin 1700 sports/scale model is based on a small twin-turboprop and is very reminiscent of the type used by the military or civilian charter airlines around the world. With so many fantastic color schemes available for this type of airplane, Avios have decided to produce a plain white version. This plain white finish provides the perfect blank canvas for you to produce a completely unique, and bespoke color scheme of your own choice.

The incredible Frenzy is the perfect all-rounder. With reduced control throws it's a smooth, stable, and remarkably easy to fly plane that is perfect for the novice or beginner. Increase those throws, and with its high power-to-weight ratio on a 3S set-up, the Frenzy lives up to its name. It is capable of a wide range of amazing aerobatic maneuvers and will meet the demands of even the most ambitious aerobatic pilot.

The XFLY Swift 2100 is a versatile electric-powered glider that is quite happy flying fast and doing aerobatics or is equally at home flying slowly and just floating around. To achieve this versatility the XFLY engineers have used CFD (Computer Fluid Dynamics), which has enabled the Swift 2100 to achieve a high lift-to-drag ratio and excellent aerodynamic characteristics. The factory-installed power system includes an efficient 3136-1000KV brushless motor with 40A brushless ESC and drives a 10x6 2-blade folding propeller with metal spinner. This system can be powered by either a 3S, or a 4S LiPo battery to deliver plenty of thrust for fast climbs to soaring altitudes, aerobatics, and general sport flying.

The Dancing Wings Hobby Fokker Eindecker III is a scale model of the famous World War 1 monoplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, a dummy engine, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

The Dancing Wings Hobby S.E.5A is a detailed scale model of the famous World War 1 biplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, scale exhausts, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

We have all had to start learning to fly an RC model at some point, and a stable, high-wing trainer that is very forgiving is what is required. The Dancing Wings Hobby Vogee-16 Trainer is the perfect choice for the rookie pilot. It has a large, flat-bottomed wing with dihedral which enables it to fly very slowly, and it has the stability to sort itself out if you get in a muddle. The Vogee's flying characteristics are very benign, beginners tend to over-control, and the Vogee is very gentle in its handling, especially if you install one of the readily available 3-axis gyros that are available on the market these days. It also has a tricycle landing gear with a steerable nosewheel which really helps with the take-offs and landings. This version of the Vogee is supplied with a powerful 2817-900KV brushless motor, a 60A brushless ESC, an 11" prop, 2 x 37g servos, and 2 x 17g 

The Dancing Wings Hobby Stick-14T 3D aerobatic trainer is the perfect choice for intermediate and experienced RC pilots alike. It is based on the classic stick design and is quite capable of all the usual aerobatic maneuvers, plus with the right power train, it doubles up as the perfect 3D trainer. It has a very wide speed range, it is just as happy flying slowly as it is screaming about the sky. For added fun and enjoyment, the strip ailerons are split halfway making for outboard ailerons and inboard flaps. This allows for really slow or steep approach landings, and if the flaps are mixed in with your other controls it allows you to customize the handling to suit your own flying style. 

The Dancing Wings Hobby Cute Girl laser cut balsa kit captures the type of vintage model airplane that was used in the early days of RC with radio assist. It has that classic retro look, lots of wing dihedral, band on wings, a large cabin, classic shapes to the wings and empennage, and tail dragger landing gear, all the features required for a retro classic look.

The controls are just basic 3 channels, rudder, elevator, and motor control, this keeps things nice and simple. We recommend that you power the Cute Girl with a brushless motor set-up. However, a nitro or a diesel engine can be used for that even more authentic vintage look and classic soundtrack.

After the incredible success of the Tundra V1 and V2, Durafly has decided to produce yet another version with even more improvements to bring the Tundra series bang up to date. The V3 is now a pure 4S set-up so it has power in abundance to make your flying even more fun than it was before (if that is at all possible!). Other changes and improvements include daylight bright LEDs (so bright they are suitable for true dawn-to-dusk flying), a reinforced nylon prop that is more efficient, and better balanced, a return to the classic EPO foam wheels which are lighter, and stronger, pre-installed pushrods, and hex-head bolts and screws throughout. The V3 is available in the classic Tundra green and white scheme, or a red and silver color scheme Durafly has called the "Inspire". The reason is that the original Tundra was "Inspired" by the "Highlander" full-size SuperStol experimental airplane.

Avios continues to bring you great flying, and high-quality RC models of interesting subjects, this theme continues with the Avios Twin Otter STOL (Short Takeoff and Landing) twin-engine plane. The Avios model captures the looks and great flying characteristics of the full-size inspired Twin Otter. The impressive power-to-weight ratio and light wing loading makes for exceptional low-speed handling and STOL flight characteristics.

The Avios Twin Otter is also crammed full of outstanding features, these include a set of large barn door style flaps, counter-rotating props for improved handling, scale outline with detailed surface finish, and scale plastic parts. Other features include a fully sprung, all metal CNC nose strut with servo saver, low bounce soft foam oversized bush wheels, and day bright LED lights throughout.

The list of outstanding features goes on with a set of floats included, these are easily fitted in place of the tricycle landing gear so that you can have even more fun flying from lakes and rivers. The included Aerostar RVS speed controllers make flying from water on the floats so much easier, they allow you to maneuver and taxi even in the more challenging conditions and situations that can be found on inland waters. To further help when flying with the floats fitted are a pair of optional tail fins, these increase the yaw stability caused by the extra drag of the floats. Avios have also included two magnetically held interchangeable nose sections, one short to emulate the "Series 100" Twin Otter, and one long so that you can quickly change the look of your Twin Otter to a "Series 200".