c130 v2 NOTES

***PLEASE BACK UP YOUR RADIO BEFORE ALTERING ANYTHING IN THE RADIO DRIVE!
* To install in your X14 radio, OPEN the folder "for X14 Radio", Copy contents to the RADIO drive on your X14. Contents should merge. 

SA-RATES
SB-FLAPS
SC-DOOR
SD-RETRACTS
SF-THROT CUT 
SH-TIMER RESET 

Receiver channel assignments

CH1 Ailerons
CH2 Elevator
CH3 Throttle
CH4 Rudder
CH5 GEAR
CH6 Flap1
CH7 Flap2
CH8 CARGO DOOR

FLAPS
This plane has two separate flap systems. Make sure Flap 1 and Flap 2 are plugged into the appropriate receiver channel. Please set up flaps as documented in the Quick Start Guide. Test flaps for correct direction and that there is no servo binding. Adjust MIN/MAX under MDL - OUTPUTS CH6 and CH7 (each flap channel) if you have any binding.

If when flying, the model balloons up or down when engaging the flaps, flight modes are enabled for elevator. Simply trim your elevator in Half Flaps and again on full flaps. Your elevator trim with flaps up will not be affected

DOOR
This plane has a cargo door system. Ensure that there is no servo binding and adjust if necessary. Adjust MIN/MAX under MDL - OUTPUTS CH8 if you have any binding.

Please confirm control surface directions before flying. Rates and expo should be adjusted to your personal preference after initial flight.

